I have an update form where a fail is displayed. The user can, using a combo box, change that fail.They can also add new records and pick the fail from the combo box.
The form is bound to query1 and the control source for the combo box is a field from this query which effectively come from a table, table1 The row source is another query, query2, that displays all fails.This works perfectly fine.
I now have a requirement not to display fails that have become redundant in the combo box (row source) but want to display them from query1 (control source). If I filter out the redundant fails in query2 then those that are on table1 are not displayed.
I presume this is because they don't appear in query2.
I have an inventory checklist being done up now. After the item info has been typed in (price, part number.. ), below i put in the transaction info (4 sold today, 2 recieved yesterday..)
I need by report to show the total number of all stocks and how much they are all worth. The report does that, no problem. Only thing is that instead of the end product, Eg: Product X, 5 pieces, $10
it also prints the transactions in the report. Eg: Product X 4 pieces, $8 Product X -1 piece ($2) Product X 2 pieces, $4.
What should I do to make my report -not- print all this useless junk, but just the end product? Thanks
Wondered if SKS can help. I have a query which I have used for a mailing list (in report). However, there are a couple of records I do not want to show. (I just don't need those addresses at this time) How do I go about omitting these two from the query? Is this to do with crosstab queries??
I am making a parameter query that looks up quality data by lot number. For some of the lot numbers certain fields of data may be null. How can I omit these fields in the query if they are null?
OR automatically omit them when exporting them data to excel?
I've created a report based on emergency contacts however some fields are blank as there isn't a "contact" and rather then have lots of empty fields all over the report is there anyway to omit them based on whether they are populated or not? there might be 2-3 records that have "every" field filled the rest are varied as to how many contacts they have.
I have an issue with duplicate records showing in a combo box. I have checked "Yes" for unique values and they still show. I only have one field showing in the drop down and don't care about the other fields for that specific selection.
I have a form with a checkbox and a combo box. When I click the checkbox, I would like it to only show the specified records that are in the combo box. The current code I have is this:
Code:
Private Sub chkHideComplete_AfterUpdate() On Error Resume Next If Me.chkHideComplete = True Then Me.filter = "[ReservationStatus] = 3" Me.FilterOn = False
[Code] ....
I basically want to hide all records that have "1" in the combo box.
On my Class form when assigning students there is a combo box which shows the students names. Once a student is picked in the combo box their name shows up in the subform.
What I would like is a way to NOT show a student in the combo box after they have been selected. Is this possible? Or should I be looking at another way of doing this?
In the form frmOrders of my database i have a combobox where i can choose a ClientID and the dropdown list shows me all the clients in upgoing order with their related orders in descent order.But the drop down list doesn't show all available clients. The two hundred heighest clientnumbers aren shown. However if i type one of these clientnumbers in the textbox of the combobox, the client is found.If i go to the property sheet of the combobox and activate the query that serves as the recordsource of the combobox, all clients are shown!!!I control of the records of these clients in the table Orders, doesn't show any difference with all the other records.What can be the reason for these behaviour. Is it a question of a limit of records that can be shown via a combo box?
Can you have a saved (unsorted) query as a row source for a combo and then add some code to enable the combo to sort the list?
Reason is, I want three combos to use the same query for finding records in different ways, but need the query to be saved, not a query built by the query builder that access takes you into from the row source on the combo data tab?
I only need the data listed in each of the combos to be sorted by one column in each of the combos.
Have seen something about bubble sorting, but not sure if this is OTT or even could be applied to this?
I have setup a ComboBox on a form, Listed the PK of the table as the control source. Inserted the PK and many other field as the row source. When I go to select a record I get the error "control can not be edited, it's bound to a auto number field, "Asset_ID"
I have a form that has four combo boxes on it that enable the user to select entrants in a golf tournament for tee off times and tee. (I have attached part of this database to this post) It all works fine but after selecting the first player in the first combo box and then selecting the second combo player I would like the player selected previously not to show up. Is this possible or do I have to rethink the way players are selected.
I have a DB of books and a form to search for multiple fields including ranking (combo box). The way I have it now is to pick "3 stars", "4 stars", "5 stars". What I want to do is have it so that if I pick "4+", it will show all records that have 4 stars and 5 stars and "3+", it will show records with 3, 4, 5 stars.
I have a form to add, edit, and delete Records from a table. I am using the following VBA
Private Sub cmdEdit_Click() If Not (Me.frmlEmpDetailsSub.Form.Recordset.EOF And Me.frmlEmpDetailsSub.Form.Recordset.BOF) Then With Me.frmlEmpDetailsSub.Form.Recordset Me.txtAddEditname = .Fields("Name") Me.cboRoster = .Fields("Roster") Me.cboPermFctn = .Fields("PermFctn") End With End If End Sub
Instead of referring to the Subform to load the data i would like to refer to a combobox:
cboSearchName
Its not an issue but This Combobox contains 5 columns...
I am having an issue trying to show all records when I load my form. It loads correctly when I don't have a record source for the main form. However, the combobox filters will not work. My goal is to have users be able to use the datasheet, subdatasheet and combobox filters. I can get the form to work just fine when I link the Main form and subform, but when the form opens it is filtered on the first record. I have been successful with this approach when using other forms, but they didn't require a subdatasheet.
Is there anyway I can have the comboboxes to filter yet be able to show all records until the user selects filters? Is this possible?I finally got my Manager to agree to use a database instead of Excel files based on this form setup and I need to make as "user friendly" as possible (look and function like a spreadsheet) I attached some pics of the form along with the code for the filter.
I have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form. Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
Hi All. I'm Sure this is simple enough, but i just cant seem to figure it out.
I want to use a Combo dropdown box with Codes FC000 - FC900. to return records in a second drop down box that begins with the Letters selected in the first dropdown box.
So When a Record is Selected in ComboBox1 eg: (FC0**), ComboBox2 brings up the record to match (FC000).
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done 2)If it can be done, how can I do it?
I have a Suppliers database which contains a form that will allow me to place orders with Suppliers.The Main form has a combo box that allows me to select the supplier. The combo box is called SupplierID with the following:
Row source: SELECT Suppliers.SupplierID, Suppliers.CompanyName FROM Suppliers ORDER BY Suppliers.CompanyName;
The subform is called Stock Subform witha combo box called ProductID with the following:
Row source: SELECT DISTINCT Products.ProductID, Products.ProductName, Suppliers.CompanyName, Products.Discontinued FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID=Products.SupplierID WHERE (((Products.Discontinued)=0)) ORDER BY Products.ProductName; Event Procedure - AfterUpdate: Private Sub ProductID_AfterUpdate() On Error GoTo Err_ProductID_AfterUpdate Dim strFilter As String ' Evaluate filter before it's passed to DLookup function. strFilter = "ProductID = " & Me!ProductID
[code]..
The Link fields are done on the Purchase Order ID (PONoID).What I want to achieve is to select the supplier from the combo box (SupplierID) on the main form and then the combo box (ProductID) on the subform to filter to only show products directly supplied by the Supplier selected on the Main Form.
I'm looking for a way to have a text box auto fill based on the selection of a combo box on the same form. I cannot use the method i find all over the internet of using multiple columns in the combo box and basing the text box on that because the combo box already has multiple columns being used to determine its own possibilities and other combo box possibilities.
I would really just like the text box to work like this, but im still kinda inexperienced in VBA...
If combo box is "F004-001", then text box is "237" If combo box is "F004-003", then text box is "280"
I know how to add in an "after update" thing, but i do not know how to do If/then statements.
I'm trying to build a database for daily work. My work in daily basis I have to fill all condition for several items.
We have two areas, with two locations under each area, and three systems under each location and each system contain more than 500 items.
I created all tables and fill by all information:
1-Table 1: Area 1, Area 2, Area 3, Area 4, Area 5, Area 6. 2-Table 2: Location 1, Location 2. 3-Table 3: System 1, System 2, System 3. 4-Table 4: all items under System 1-1-1 5-Table 4: all items under System 1-1-2
[Code] ....
Last table will be LogBook which will be as follow:
date l time l area l location l system l item l Conition1 l Conition2 l Conition3
My question regarding to the form of the above table:
How can I make a combo box for area field and when I select for example area1 will appear only the locations which under area1 in location field, and when I select location1 for example will appear only the systems under location1 in system field, and when I select system1 one for example will appear only items under system 1.Combo box list will be based on the selection in previous combo box and so on.
I am trying to select a value from one combo box and on the basis of this selection the other combo box show only those values which have link to the value I have selected.
I have a continuous form which has 1 field in which is a combo box which has a list of names. Once you select a name, the next record down is available for selection. This is because my tables PK is a autonumber. How do i filter the records to only show the names which have not been previously entered in my above records.
