Forms :: Populate Text Box After MULTIPLE Combobox Selection
Apr 1, 2013
I have a form based on a query.On the form I have 4 comboboxes.The combo boxes filter eachother without a problem (based on custom select query).Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)I try to say this easy.Master query contains 5 columns:
- group
- type
- job
- insurance
- charge
combo1 selects group (and filters records)
combo2 selects type (from remaining records and filters again)
combo3 selects job (from remaining records and filters again)
combo4 selects insurance (from remaining records and filters again)
[code]....
This works great and the dropbox only shows 1 OF EACH DIFFERENT record...If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
Got a bit stuck in a database. I have a form based on a query. On the form I have 4 comboboxes.
The combo boxes filter eachother without a problem (based on custom select query)
Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)
Master query contains 5 columns: - group - type - job - insurance - charge
combo1 selects group (and filters records) combo2 selects type (from remaining records and filters again) combo3 selects job (from remaining records and filters again) combo4 selects insurance (from remaining records and filters again)
Combo4 is based on following query: -column1 Insurance Total=Group by Show=yes -column2 Job Total=Where show=no Criteria [forms]![name].[combo]
This works great and the dropbox only shows 1 OF EACH DIFFERENT record
If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.
If I do this, the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I have a combobox on an unbound form. After making a selection, I click a command button which opens a bound form to a new record. What I need to code next or add into the macro, is for the selection of the combobox to fill in the contact id, and contact name in the correct text boxes.
The combobox row source is: SELECT qryPBS.ConID, qryPBS.PBSName FROM qryPBS; bound column 1.
Trying to pull information from a text box on double click to populate a combobox on another form...
keeps coming up "type mismatch"
I call lngAccount as recognised on mouseover... ("Business Account" is the value I want)
I can't get it to work!
For info, the form I'm calling from is a subform located FrmMainMenu/FrmAccountsMainMenu and the control source is [Account]
the form I wish to populate in on FrmTransactions (it is a main form only) and the combobox is cboaccountselect - **I've seen the obvious mistake with no reference to this whatsoever, corrected it, and still not working**
I am creating a Database to track product details and inventory for items we purchase.
I have several Tables and several Forms already working properly, except for one thing.
I have a Form called "Lights", and it contains a ComboBox called Light_Name and 6 TextBoxes: Manufacturer, Model_Number, Cost, Weight, Light_Type, Notes. It also has an Attachment Field linked to the same table.
I am using the Code:
Me.TEXTBOX = Me.Light_Name.Column(#)
to populate the Textboxes with the relevant info from the Light Table.
This works for every Textbox I have.
However I cannot get the Attachment Box to change. And when I try to add code to it I get a debug error. The Attachments are PDFs and I need them to show based on the ComboBox Selection.
I have tried the same code as above, and as I said, it gives me an error.
I am designing a nomination form (web database so no vba macros can be used).
The form has 3 combo boxes: cboStaffName, cboLevel, cboNominee.
The form is bound to the tblSubmit table where the submissions are populated.
I used a select statement:SELECT Staff_List.Staff_Name FROM Staff_List; to populate the combo box for the Staff Name selection.
This is the select statement to populate the job level combobox:
SELECT Staff_List.Level, Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Staff_Name)=[forms]![frmtest]![cboStaffName]));
The select statement to populate the combobox for the nominee combobox:
SELECT Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Level)=[forms]![frmtest]![cboLevel]));
The problem is that the staff_name in the first combobox is still found in the nominee combobox which should not be because a staff cannot nominate self. There is a field in the Staff_List called YesNo that should be activated for each staff that is selected so that the select statement on the nominee combobox can be updated accordingly to remove items with the field "Active"
How to get the checkbox selected for each corresponding staff.
I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.
I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?
=[Combo2].[Column](1) =[Combo2].[Column](2)
One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.
I have a combobox [CBreason] that reads from a table to show me why someone is gaining access to the building.
One of the options is "Incident".
When incident is selected I want a textbox [TBIncidentNo] and a button[BIncidentDup] control I made to appear.
I thought that the code:
If Me.CBReason.Value = "Incident" Then Me.CBIncidentNo.Visible = True Me.BIncidentDup.Visible = True Else Me.CBIncidentNo.Visible = False Me.BIncidentDup.Visible = False End If
Placed in the after update action of the CBReason box would sufice but it doesnt work
I'm guessing the value is not recognised fro some reason but i cant work out why. There is no error message or issus, it makes the box dissapear when there is no entry but no change for selecting incident.
I have a table filled with company contacts and form with a combo box containing the contacts names.
When a contact is selected I want it to show their Telephone, Mobile and email address in text boxes below. But it only shows the telephone number and the other two fields stay blank.
what I'm doing wrong ?
I have this code assigned to the combobox:
Code: Private Sub MainContact_Change() Me.Text169 = Me.MainContact.Column(3) Me.Text167 = Me.MainContact.Column(2) Me.Text177 = Me.MainContact.Column(1) End Sub
And this is the row source:
Code: SELECT tbl_Contacts.Salutation & " " & tbl_Contacts.ContactForename & " " & tbl_Contacts.ContactSurname AS MainContact, tbl_Contacts.ContactTelephone, tbl_Contacts.ContactMobile, tbl_Contacts.ContactEmail FROM tbl_Contacts WHERE (((tbl_Contacts.ID_Company)=[tbl_CompanyBookings].[ID_Company]));
I've got an access front-end database running on Access Runtime on a Terminal Server with a back-end on a data server both of which are hosted by a remote company and accessed via Terminal Services. All is well and the database is working fine but because this is a cloud system I need a way that I can easily delve into the tables on the back-end without copying it down locally from the cloud each time (I've set up an "administrator" option so that this would be available to limited users). I've got the front-end forms working as I'd like but I have quite a few tables and I'd like to avoid creating a separate form for every table. I've been able to populate a combobox on my form with the list of linked tables and I'd like that when I choose a particular table from this list that the whole table is then visible within a subform below in case I need to manually intervene with the data for any reason.
Is it possible to populate a single combobox with data from 3 different tables.
I have a table called observations (for observing deer), in that table is a field called Location, I have 3 other tables that list possible locations t_foodplots, t_stands and t_section.
I would like to have a combobox called location on my observations form that will allow me to select the proper location from one of those 3 tables, the choices would be something like this...
Section 1 Section 2 Section 3 Stand 1 Stand 2 Stand 3 Foodplot 1 Foodplot 2 Foodplot 3 etc....
The chosen value would be stored in the t_observations "location" field.
it's easy to set up a form with a combobox that will list all records and moves the user to the selected record. But I can't figure out how to just show a selection of the records in this combobox, instead of all records.
So, to use the example used in most online tutorials: a drop down menu shows you all the names in a customer database. However, I'd like to have instead a dropdown menu with an overview of all surnames in the database and that I move to the first record with the selected surname.
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID Company Contact Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I would like to create a combobox on a form in which a user has three selections: negative, positive, other.
If negative is chosen a textbox auto-populates with "none detected". If positive is chosen the text box populates with "positive" and If other is selected the text box populates with "unspecified".
In my quality control database QC techs will be entering in test results. Each quality control entry they put in will have a product and lot number it is related too.
My question is about making data entry easier for the QC techs. When two jobs are being run at once, the techs may have to alternate between which jobs they enter, meaning a different product and lot number. It would be frustrating for the QC techs to enter in a product code and lot number for every entry they make.
Can the lot number field be automatically populated when the tech selects a product? Basically, if the tech selects product A, can the last lot number value for product A automatically populate the field in the new entry?
Edit: Currently I have the "solution" of making two instances of the entry form with each lot number entered on the different one. This allows the QC Techs to use the CTRL+ ' to populate the last record, allowing them to quickly enter the product code, lot number, and date of the job they are working on.
I am having issues with my combo box populating values based on the selection from another combo box.
Database : contains 2 tables: Staff_List, Level_Type and a form called frm_Test The first combobox cboLevel gets its value from the Level_Type table with the select statement SELECT [Level_Type].[ID], [Level_Type].[Level_Type] FROM level_Type;
The values to be displayed on the second combobox cbo_Name is expected to be dependent on the Level selection made from the first combobox i.e if Level 1 is selected in cboLevel then only Names of people in Level 1 will be displayed in second combobox.
The select statement I put there is SELECT Staff_List.ID, Staff_List.Staff_Name FROM Staff_List WHERE ((([Staff_List]![Level])=[Forms]![frm_test]![cboLevel])); This is not displaying anything in the second combobox after I tried it in the Form view, just empty.
When I amend a combobox I want a label to adjust to reflect the current cbox input.
I have used the event change and done on change me.label = me.cbox.value and that works however the cbox has 2 columns. The unique category id and the category. So at moment if i choose the first option from cbox i get 1 appear in label as opposed to clematis for example.
What code to use to select the second column from cbox value.
I'm building a new db for tracking tests/results, using Access 2007.
On this issue, I'm working with 2 tables, Sample and Equipment.
On a form to enter sample info, I have a combo box to select a piece of equipment.
When the equipment is selected, I need to have a sub-form populate with several fields of data from the equipment table, based on the equipment selected.
I'm not trying to save the equipment data again, I just need to display it, based on the equipment the user selects. This is just a kind of second check to remind the user what the equipment he's selected will do.
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I would like to set up a picture in the form that changes based on a combobox selection, for example if you select from combo box list "design1", a picture that have a name : design1 will appear as a background to the form ..
I am designing a Web Database with a bound form to a submit table.
On the form, I have a combo box with selections that should influence the value to be displayed in a textbox also on same form.
For instance the combo box for Staff Name contains list of all Staff and I want the textbox to automatically display the level of the staff that was just selected in the combobox.
I know how to get this done using a combobox but my boss insists that the level should be automatically displayed in the textbox once combobox selection is done.
Using the combobox for level, I used the select statement in the RowSource property :
SELECT Staff_List.Level, Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Staff_Name)=[forms]![frmtest]![cboStaffName]));
I am in a dilemma of how to replicate this for the textbox because textbox only has control source and no RowSource where I can put this select statement.
Also, I will still need to bind this textbox to the submit table with the column name "TxtLevel" in the control source
Please see attached sample access db.
Also note that I cannot use action queries or VBA because it is a Web database and not a client database.
