Forms :: Possible To Use A Command Button To Update Matching Records In A Form
Jul 7, 2014
Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with
the text from column 2:
NL-F and NL-M = Normal
VUS-F and VUS-M = Variant of Unknown Sig.
A-M and A-F = Abnormal
There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.
Cytogenetics ID Result Final TAT Date
14-0390 Normal 4/11/2014
14-0396 Variant of Unknown Sig 4/18/2014
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
I want to be able to update a date field in my form with a command button based off the date the person picks off a combo box in my header... is this possible?
I am setting up a "to_do" list in access. One of the field is the date the task was last completed. I want a button to update that date to the current date for the record that i am viewing on the form. Below is the code that I am using. When I click on my button, it updates the first record in my to-do table but not the current record displayed in my form.
Private Sub Cmd_Update_Click() Dim DB As Database Dim rs As Recordset Dim i As Long On Error GoTo Command4_Click_Error Set DB = CurrentDb
I am trying to create a command button that will delete the current records in both the subform and main form.
I know how to create a command button that will delete the current record of which ever form I'm in (either the sub or main form) but I wish to do so both at the same time with one event procedure. I currently have been experimenting with a button in the subform but I don't really care if it's in the subform or main form.
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
I have a form listing out a bunch of clients. There is a button associated with each client that pulls open a new form with additional client information. There is information that is calculated on the backend and stored in the database when a user is inserted or different fields updated (i.e. there are reports that are due different time frames after the clients admission date. I automatically populate the database with those dates once the clients admission date is updated).
The problem I am having is that when I enter a new client or update a current client with new information and then click the button to go to their details page, those auto-populated dates are not populated. I am calling a subroutine that is within a module when the button is clicked. The subroutine works fine at other instances throughout the application so I know there is no issue with the code. I even call it if they click the close button, but before the information is auto-populated, I had to run a Me.Requery on the close button. I think this is because the records are not actually being updated in the database. I even have a DoCmd.Save acForms, "Clients" command before running the Call updateDatabase subroutine, but that doesn't do the trick. I can't run the Me.Requery after the click of the details button because when I do that it always opens the details form to the first ORDER BY record. I think that I need to update the selected record and re-call it in order for this to work.
I have a couple of command buttons on a form. They have embedded bitmaps as pictures with a caption below. For some reason when the forms loads (and also in design view), there is a narrow white outline / border around them. As if the button is drawn on a slightly larger white square?This border disappears as soon as I hover over the button (in form view) or click on the button (in design view).
i am trying to add an import command button to a form so that personnel not familiar with Access can simply push the button and then select the file to import. I want it to import information to a specific table by replacing all records in the current table with the import. I am not the best at coding, but I can understand enough to figure out what I may need to do.
I will be exporting a table to excel from the database. Multiple people will have this database and often times will not be able to access a shared database, so I need to export the table and then set up a way for them to import the excel document into their database by deleting the information in the old one and then updating to the new one.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:
in the attached form i can select multiple image but my next and back button does not work ,also i want the path to the file shown above.to copy the name from there and paste it in the table,to write remarks.
hi guys i have a main form with a subform. i have created an add command button to add rows in the subform. (it could only add when the record count is less than 3). here is my code
If Me.SubFormName.Form.RecordsetClone.RecordCount >= 3 then Msgbox " You can only add three" cancel=true ' cancel event me.SubFormName.Form.FieldName.SetFocus ' Set the focus to the field exit sub End if
i get no errors, However my problem is that it puts the focus on the begginning of the subform, i wanted to go to the end of the subform or new row... right now i have to go mannually until the last row... is there anyway to put the focus on the last row?
I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code: Sub tglEditBt_Click() '------------------------------------------------------------------------------- ' Circular toggle button to change display mode of the form ' ReadOnly - Edit - Add '------------------------------------------------------------------------------- ' On Error GoTo NotFound Dim ForName As String Dim strSQL As String Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
I am on Access 2007, and know very basic stuffs to create tables, queries, and form search. I have just successfully completed a search form filtered with a combobox. Also I have a built-in subform within the main form to display other results as well. The display results are based on one complex query (relational query). Now I need to add a command button that would take me to another form to update the current record found.Quick on the design:
- When I search a subject in a main form(subject lists in the combobox), it would populate results below in the main form and also subform would populate other results as well.
1. Add a command button so can take me to new form, but would need to have the current record populated. 2. Once updated, then how do I save it?
I have 2 tables, one has a list of comments indexed by numbers.
The second table will be populated with numbers that correspond to the first table based on usage of the form that I'm about to describe.
The form contains several check boxes. Each corresponds to a comment from the first table. If 3 of the check boxes are selected when the command button is pressed, I want three separate new record entries to go into the second table and the data that I want entered is the text in the label that is next to each check box on the form. After the records are added to the table, I'd like to reset the check boxes.
I simply cannot figure out how to code the button to do this.
I have a subform where you can add multiple records. i have a command button labelled NEXT (which obviously navigates to the next record) but I only want this to be enabled when there is more than one record.
I am OK on the enabling bit but how do you specify if the record number >1?
Does someone have time to start me off on some code?
I have two tables, one is GENETIC and the other one is BoneSampleDNAprofile. Both tables have the field CY-Code. I want to create small form with 2 text box fields and one command button on the form to be able to insert CY-Code from the table GENETIC to designated DNA_LAB_Code in the table BoneSampleDNAprofile.
In that small form I would type DNA_LAB_Code and CY-Code where after pressing command button will insert CY-Code for the designated DNA_LAB_Code. This is continuous process after our Laboratory receive results from DNA laboratory. I have attached two .png files which are example of two tables.