i have a split form in ms access that has the data source of a linked table in sql server. this form has some fields those are bound to the columns of a table. I want to have a button that would appear in front of each rows. do you know how i can do this?
in a continius form when i will create a button it will be appeared continiously. how can i do this for split form in ms access
I have designed a split database( with back end and front end), I am just wondering what would be the best way to put a password for both of the back and front end.
View 10 Replies View RelatedI have this code set to a button on a split form. It filters out all the blank records for the "Status" column.
Private Sub cmdFilterPendingStatus_Click()
Me.Filter = "[Status]"
Me.FilterOn = True
Me.Requery
Me.txtFilterNamePlate.SetFocus
End Sub
I would like to do the exact opposite and filter out everything except for the blank records in the "Status" column.
How can I change the code to do this? I guess I should also mention that the "Status" field is a long text/memo box but I can easily change this to short text if I really have to. I realize that short text can do the blank filtering within the split form itself by clicking on that tiny arrow in the column header but I am trying to make it really user friendly where the user can just click a button to do this. The long text box has some options to filter but not for blank fields in a record which makes me think that this may not be possible to do if the Status field remains a long text box. Some examples for the filtering options that are available in the split form for a long text box are: Begins with, contains, ends with, etc... however, when I type "" to try and filter out everything except the records that have null in the Status field, it says that "" is not valid.
What can I do to get the results I need?
I want to calculate the average of 16 anodes from text box into the "average drop" box and simultaneously want the data to be saved in the table too as one of the fields. Also, How to load form view while the database loads?
View 10 Replies View RelatedHi All
How do you assign a shortcut key to a command button.
I want to close a form with the command button - the button would have the words "Close Form" on it with an underline under the C.
If the user does the action eg: Ctrl E - the form will close.
Tee
I have a database that had some code that enabled the user to click a button and it would take information from one Access query or table and paste it into specific locations in Excel. This is important because the last worksheet has specific formatting in place.
If it didn't, I'd just use the transfer spreadsheet option and not even bother opening Excel at all with code.
I've got it working well except for the last part. The last query being copied has eight records and only one is being sent to Excel. Same code as the other queries where all of their data is going to the right spot in Excel with the right number of records.
Private Sub AM_Top_25_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "delete_ShortPartItems", acNormal, acEdit
DoCmd.OpenQuery "append_to_Short_Part_Items", acNormal, acEdit
[Code] .....
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
Basically I need to design form that looks very similar to either Split Form or Subform. I have attached a print screen of what I roughly need. The form is split into two parts. In the first/top part there are some List Box/Date fields that act as filters to the bottom form, so the bottom form displays only records that match values in red. The second part of the top form has some field that require input from user and then these records are added to the bottom form. I was trying to use both Split Form and Subform and none of it is working,I have attached an example of database and this form would be based on data from Query1.
View 5 Replies View RelatedIs it possible (haven't found a way yet) to have two "split subforms" on a parent form side-by-side? When I try the multiple rows portion of the split view I created as a subform doesn't appear?
Want to have a form when I have search/filter/select record for table 1 (on the left) and table 2 (on the right) with a means in between to create a relationship which has a few parameters.
I created a split form. My main form is just a form, based off of tblBlotter. The subform is based off a query, which is the based off the same tblBlotter. (Not sure if this is proper - maybe I just need the table?)
I have a link master and link child field set to ID. When I open the form "subBlotterHistory", it opens and shows as a new record only. I want it to show ALL records on the query subform and be able to scroll up, down and edit.
Attached is a sample w bogus data.
When I select a row on a split form I would like the up and down arrow keys to move to the previous and next record. However this isn't happening.
When I select a row and press the down arrow nothing happens.
I have the navigation buttons set to no because of the issues I'm having with them.
How to get the up/down arrow keys to work on a split form??
If I hide the AutoNumber ID field in a split form datasheet, nothing is displayed in the forms navigation buttons (Record x of x).
If I unhide the ID field, the record number and number of records correctly.
The control is Enabled and Visible.
I have a split form with many of a combobox (date, text,numbers and both).
How can displayed only the records in the datasheet based on a combo box selection?
How to build this mechanism and write a sample code?
I'm using a split form with the datasheet on the left.
When I use the 'Find' in the Navigation buttons at the bottom of the form, it refuse to find text in a particular text box.
The text box is a memo field and is enabled.
Example:
I have text in the memo field which is a title of an episode - "The Outcast."
When I start typing "the" it finds this text in the memo field. But when I type the entire title it the finds the text in another field. ie "out."
I've tried the 3 different Search setting in options. When I use the Find command from the ribbon it work ok as long as I select the text box to search in first.
I am pretty new to VBA and I am having the same problem of hiding and un-hiding columns on a datasheet of a split form. I am building a system that will be used in front of customer and therefore wish to hide columns that contain cost sensitive data. The same forms need to be able to show the Sales Rep the hidden columns simply by ticking a box. Basically a toggle on and off of hidden columns.
I have been playing around with the code below (which i found in another forum) to hide the Field called COO when I click the tick box called chkHIdeFields check box. This works on a Single form but not on a datasheet of a split form.
Private Sub chkHideFields_Click()
' Note: vbTrue = -1
If Me.chkHideFields = vbTrue Then
Me.COO.Visible = True
Else: Me.COO.Visible = False
End If
End Sub
I have been able to hide the column of my split form by using the ColumnHidden property of the On Load event just as a proof of concept that the ColumnHidden property actually works to hide a column, which it does. This is the code that im using to hide the column called COO.
Me.COO.ColumnHidden = True
However if I then set it to = False and then close and open the form, it doesn't unhide the column. the only way I can unhide the column is to do it from the Form view via the un-hide dialogue pop up box.
I have two issues here, the first one is getting the form to recognize when to hide and when to show the column of the datasheet on the split form and the second is to get the code to for the check box method.
Lastly once I get it working for 1 field I need to be able to define a list of 7 or 8 other fields all at the same time.
Am trying to display images on a form in a split database. I add the attachment field to the associated form's table and add the attachment control to the form but cannot get the image(s) to display on the form (the control remains blank). I can add the image(s) in table view (and display them) but double clicking on the form control also does nothing.
I think I must be doing at least the basics correctly as if I try the same thing to an earlier, non-split version of the database, all works as expected.Are there additional steps required to do this thing in a split database?
I've created several Split forms that have the data input fields in the form with the relevant query datasheet shown below. As you tab through the form fields, the various cells in the datasheet are highlighted and move across the data row (as one would expect!). I want to put a particular field / Column at the start of the datasheet so that it's always available for view, but it seeme that what ever I do the column ends up back at the very far end of the data row!
I've sussed out the "Freeze Fields" facility which will keep the first column visable whichever cell is highlighted across the data row.
The column I want as the first column currently sits at the far end of the data row. So far I have dragged the row to the first column position; I've arranged the Query driving the form so that the column is at the front of the row, both in design view and in datasheet view, but to no avail. Everything I do to put the column at the start of the row in the datasheet shown below the form ends up with it back at the far end of the row the next time I open the form.
I've placed an unbound text control in the header of a Split Form. I also placed a label in header of a split form.But, neither is visible until I select a row on the split form datasheet.The Visible property is set to yes and the fore color is white and the background is transparent.
View 6 Replies View RelatedAccess 2013 on a Window 8.1 system.
I have a combo box based on a look-up table which I use to filter the records in the form. Seems after closing the form and reopening it, the filter remains.
I'm not sure if this is referred to filtering or restricting the records.
The value in the record source doesn't get changed but the records displayed don't reflect this. The records shown are the last filter I selected in the combo box.
The only work around I have found is I must explicitly set the record source in the on open of the form.
The was not occurring with access 2010. And I have made no changes what-so-ever.
I have a bunch of forms which have a split form layout, datasheet area to the bottom of the forms. I'm wanting to group all these split forms onto a "Navigation" form but when I click the tab for each form to be displayed in the subform area the datasheet split is now missing and all I get is a "Single" form view of what is a split form. How can I get these split forms to view properly in the subform area of the navigation form, I guess there's a property setting but I can't see it?
View 3 Replies View RelatedI have a split form that was not made by wizard. On the form part I have a combobox that is unbound to the form data set. The combobox has a query row source that is based on the current row selected. I want the combobox to have an up-to-date result based on which row is selected.
If I set the combobox to requery in the form_current event then I get what I want. I don't want to put up with the little delay that is generated every time a user changes rows because of the requery, though. I only want the requery to happen when they use the drop-down menu.
I have the requery in the gotfocus event of the combobox on the form. I mostly get what I want this way, however if they select an item in the drop-down list, then choose a new record in the datasheet, then try to use the combobox again, the combobox is not refreshed (because it never lost focus?).
To get around this, I've tried to setfocus to something on the form in the on_current event, but access gives me an error: 'Access can't move focus to the control btn_Refresh'.How can I get the combo to requery only when users are about to use it?
I have elected to have tables inserted into my forms. For example on the School Information form, I have the Employees table inserted at the bottom so that it will show the employees that are assigned to that school when it's pulled up.
Before I split my database into a BE/FE situation, I could expand the items in the tables to other related items, but now that option is gone.
Is there any way to get that back with a split database?
I have a database and form that is used to register times and various codes for employees to enter their work schedule for the day. Right now I am using a split form where they enter a ID code in the form and it auto populates with their name/department/and date. They then go and fill out a few boxes regarding time spent, machine used, and purchase order.
Once the information is added it is seen below due to it being a split form.
My question is this: Can I make the bottom portion (split form) filter and display only that specific employees ID number and his previous entries? Right now it is possible to view all of the entries placed and due to it being used on a network connection there are many submissions, I want it to narrow down so that once the employee enters his/her own ID only their previous submissions for that day can be viewed.
I have a split DB that is in its (hopefully) finally stages of development. Using Access 2010. It is being developed both at work and at home on a 64 bit machine. The remainder of the machines are 32 bit.
All of a sudden one of my most basic sets of code doesn't want to work, but only on my machine at work. It works fine on my home computer and on other computers at work. It is the simplest of codes, run from frmNameA:
DoCmd.OpenForm "frmNameB", acNormal, , "[SequenceNumber] = " & Me![SequenceNumber], acFormEdit, acWindowNorm
The desired sequence of events is to open frmNameA, find the active clients and then click on the [SequenceNumber] to bring up the related record on frmNameB.
When I do this on my computer at work, it asks for the query criteria for the [SequenceNumber] and the criteria for another field. On the home computer and others at work, it works just fine.
In a related problem, I have the following code on the OnLoad event for frmNameB. It opens all the related records for active clients that are in frmNameB. But if there are no related records, it is supposed to cancel the event. Again, it works fine on my home computer and others at work, but not my work computer.
Private Sub Form_Open(Cancel As Integer)
'code when opened from frmNameA and no record exists in frmNameB
Dim MyReply
If ClientID = "" Or IsNull(ClientID) Then
MyReply = MsgBox("No record exits in frmNameB, Do You Want to Exit?", vbOKOnly)
If MyReply = vbOK Then
DoCmd.RunCommand acCmdUndo
DoCmd.Close acForm, "frmNameB", acSaveNo
End If
End If
End Sub
What I can't figure out is why this may be happening, where I might look for errors, and what I might do to correct this.
I am running Access 2003 and have created a split form using one of the std form options. The file it is querying has about 20 fields per record. The split form that is generated has four columns of 10 fields each.
E.g.
Column 1 Column 2 Column 3 Column 4
Employee Fred Smith Weekending 24-June-2013
Age 25 Hourly_Rate $30.00
Normal_Time 24 Sick_Leave 8
Vacation_Hrs 8 Total_Hrs 40
etc
etc
Field10_Name, Field10 Contents, Field20_Name, Field20 Contents
When I view the form generated, some of these fields are too narrow and others are too wide. I would like to make the width of the fields various widths. But if I try to widen one field in the column all fields in the same column are made the same width. It appears as if they are multiply selected. Is there any way of selecting a single field and varying the width without impacting fields above or below it in the column?
I have a Split form displaying parts information and have all data displayed from the table including an obsolete field which is a Yes/No checkbox.
I want to display ONLY unchecked fields on a button click. I have tried this code so far but it didn't seem to have any effect
Private Sub cmdCurrent_Click()
Me.chkObsolete.Visible = Nz(Me.chkObsolete.Value, True)
Me.Requery
End Sub
Commands:
- cmdCurrent = show all unchecked fields
- cmdShowAll = show all fields
- cmdSearch = filter based on textbox entry
Other: There is also a hyperlink in each field (on the form only) to open each individual record for editing.
Field in question is chkObsolete
Command in question cmdCurrent