Forms :: Putting Average Of Some Fields In Another Field Through Form
Oct 15, 2013
I want to calculate the average of 16 anodes from text box into the "average drop" box and simultaneously want the data to be saved in the table too as one of the fields. Also, How to load form view while the database loads?
View Replies
ADVERTISEMENT
Sep 2, 2013
I have 4 texts fields [DEVICE INSTALL] , [INSTRUMENT STAND], [BRACKETS RACEWAY SUPPORTS], [TUBING CAPILLARY] all can be either a percentage from 1-100 or "N/A" except [DEVICE INSTALL].I would like to calculate the [percentage complete]
my calculation in the field is as follows:
([DEVICE INSTALL]+
IIf([INSTRUMENT STAND]="N/A",100,[INSTRUMENT STAND])+
IIf([TUBING CAPILLARY]="N/A",100,[TUBING CAPILLARY])+
IIf([BRACKETS RACEWAY SUPPORTS]="N/A",100,[BRACKETS RACEWAY SUPPORTS]))
/4
this seems to work to a degree. but for some reason when the [INSTRUMENT STAND] value is not "N/A" the percentage calculated is a wacky value much higher than 100. how could I possibly change my division #?
View 4 Replies
View Related
Mar 8, 2013
My table has 3 fields, Employee Number (text), Job Description (text) and Current (yes/no). The table keeps track of the Job Descriptions that an Employee has had along with his current Job Description (actually Title is more appropriate a word but client requested Description) So the table has records such as:
0001 - Floor Sweeping - no
0001 - Ceiling Cleaning - yes
0001 - Dumpster Turning - no
The yes signifies that that is the current Job Description for employee #0001 and the others with no are previous Job Descriptions that the employee #0001 has held.
Now - I created a form to add these records to the table and on that form I want a list box to show the records in the table for this employee but I want to sort it such that the current Job Description is listed first and the rest show up in alphabetical order following. I have the query to list all of the Description, but how can I get the current one to always appear on the top of the list?
View 14 Replies
View Related
Jul 11, 2006
Somewhat simplistic question, but I can't seem to get it to work correctly.
SELECT Field1, Field2
FROM Table1
WHERE Field1 = [Forms]![Form1]![Text1];
Form has two quieries, named Text0 and Text1. Text0 contains the Field info for the query to search under.
How do I change it so that this will work.
SELECT Field1, Field2
FROM Table1
WHERE [Forms]![Form1]![Text0] = [Forms]![Form1]![Text1];
Presently I am getting nothing but blank queries. I'm sure its some simplistic thing but I can't figure it out atm.
View 4 Replies
View Related
Dec 9, 2014
i have a split form in ms access that has the data source of a linked table in sql server. this form has some fields those are bound to the columns of a table. I want to have a button that would appear in front of each rows. do you know how i can do this?
in a continius form when i will create a button it will be appeared continiously. how can i do this for split form in ms access
View 1 Replies
View Related
Oct 28, 2013
I am trying take all the data from one field "TOTAL" and Average it out and print it in one of my forms. I would also want this data to update automatically as the totals are updated. I am attaching some screen shots of what I am talking about The first pic is the totals field that i want to have averaged up. The second pic is where I want it to be printed out.
View 7 Replies
View Related
Feb 16, 2007
Hi guys!!!!
I try to find an answer in the forum about "Average Fields",but ican't
I am confused:(
I wan't to export Avg Of the fields like in the panel below:
View 2 Replies
View Related
Feb 21, 2005
How does one cause certain data to appear in another field based upon the data entered in another field.
For example: I enter in the field the word "Carrot" in a field called food and the word "Orange" appears in the field color. And then if I enter the word "Beans" in the field food then the word "Green" appears in the field color.
Thanks for you help in advance.
Eric
View 1 Replies
View Related
Sep 22, 2014
I have a form called PAF_Assignment and on this form there are many textboxes for editing. After all fields are entered, the user clicks on a button and this button populates the PAF_Issued_Date field with the actual date.
Then I want to disable (enable=False) all fields on this form once there is a date on PAF_Issued_Date as I don't want any user to make any changes after submitting it, although the user would still be able to read the information submitted.
I have tried the following...
PAF_Assignment Form AfterUpdate Event
If Me.PAF_Issued_Date=Not null Then
Me.FieldName1.Enabled=False
Me.FieldName2.Enabled=False
Me.FieldName3.Enabled=False
[Code] ......
However this is not working, there is no error message or anything but the fields remain enabled with the date...
View 3 Replies
View Related
May 27, 2013
I have a table form (I want to have many records available in the screen)
I want to disable fields based on a value of another (main) field.
The fields are check boxes, so the automate formatting is not available.
I use the VBA code below:
Select Case name1
Case "POINT"
Me.sf1.Enabled = False:
Case "SIDE OUT"
Me.sf2.Enabled = False
Case Else
Me.sf3.Enabled = False
End Select
but the fields become disable to all records, not only to the records under the right condition. Why?
View 2 Replies
View Related
Jul 18, 2013
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID
Company
Contact
Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
View 1 Replies
View Related
Aug 30, 2013
The table ProductInfo has an ItemID, and its corresponding Quantity.The table Orders has a PO column, an Item# column, a OrderQuantity column, and the column Item#CurrentStock which holds the Quantity of the selected item, for 3 items.I have created a form that has a ComboBox populated with the ItemID's from ProductInfo, that when selected populate the corresponding Item# in the Orders table.
I would love if the Quantity(stock) from ProductInfo would automatically fill the Item#CurrentStock field on the form when the ItemID is selected from the ComboBox.But all of the fields only relate to Item# from the first ComboBox!?!?I have tried =dlookup,
View 3 Replies
View Related
Jan 8, 2014
What is wrong with this query?
=IIf(IsNull([OffPeakDay],IIf(IsNull([OffPeakHour],Sum([Import]-[Export]),0)))
What I want is to sum the field (Import minus Export which are numeric) on the form if the OffPeakDay AND OffPeakHour fields are null.
View 11 Replies
View Related
Jan 12, 2006
I have a query which has a field where it shows reservations. if there is no reservation the field is empty.
how can I achieve getting a 0 in this field when it is empty?
View 14 Replies
View Related
Jun 27, 2013
I am wanting to grey out/disable a field on a form based on entries in two other fields being the same. One of these fields that contains the data to be referenced in on a sub-form.The form is called 'Payment_Information-Form', the field to be greyed out/disabled is called 'SUF A Paid?'
The fields that are being referenced are: 'Set up fee in s (SUF) Recrt Restriction A <=' which is on the main form, and 'SUF_Letter' which is on a sub-form (within the main form). The sub-form is called 'Costings_11_Previously_Paid_SUF subform'.If 'Set up fee in s (SUF) Recrt Restriction A <=' equals 'SUF_Letter' then grey out.I tried the following formula in both the On Current and After Update sections but it hasn't work.
=IIf([Forms]![Payment_Information-Form]![Costings_11_Previously_Paid_SUF subform].[Form]![SUF_Letter]=[Set up fee in s (SUF) Recrt Restriction A <=],[SUF A Paid?].[Visible]=True,[SUF A Paid?].[Visible]=False)
View 4 Replies
View Related
Oct 28, 2012
I need to calculate the average repaired time and the average response time. These are two separate fields ....
View 1 Replies
View Related
Nov 7, 2005
Hi,
I have a two column table and I want to display all records in the second column but I want it to be displayed in another single field.
Anyone has a trick on this?
Example:
Column1 Column2
001 Basket
002 Jar
003 Pillow
004 Hat
Result should be something like this:
Basket, Jar, Pillow, Hat
View 1 Replies
View Related
Jan 26, 2006
Sorry guys, I thought this would be simpler than it was!
Basically I just want to update my "Resolution date" field with the date or time now (which I know how to do) but AFTER I input data in my "Resolution" field ie I want a field to automatically record what time I am entering the text in my "Resolution" field?
How do I do this, and can I do it without writing a macro? I thought it was along the lines of After Update, but now I am confused!
Thanks again - I am learning just slowly!
View 5 Replies
View Related
Jan 20, 2012
I have a large amount of field data that was taken by a data logger. Specifically, The datalogger has five temperature probes embedded in soil, and takes a measurement automatically once every hour for each probe. So the table has a Time field, and then a Temp1, Temp2,... Temp5 field. I need to be able to average the temperature fields. This within itself is easy enough, I just tell the query to find (Temp1+Temp2+...+Temp5)/5. However, unfortunately, because it is field data is is very common for one (or more) of the ports to be malfunctioning at any one measurement time for a number of reasons.
If, for instance, Port one does not have a value, then the formula I entered will not work, as it can't add a null value to numbers, and otherwise It would be dividing by five whereas there were only four values to average.
View 3 Replies
View Related
Jun 11, 2007
Hey guys im really stuck on this one and hope some one can help me out.
I have the following structure:
Table: Products
ID
Product Name
Table: Suppliers
ID
Supplier Name
Table: Prices
ID
Product Name
Supplier Name
Supplier Offer
Query: QrySuppliers
Prices.ID
Prices.Product Name
Prices.Supplier Name
Prices.Supplier Offer
Percent Off Trade: IIf(IsNull([Products]![Trade Price Euros]),0,([Products]![Trade Price Euros]-Nz([Prices]![Supplier Price],0))/[Products]![Trade Price Euros])
Because the "Percent Off Trade" field is unbound to a table I cant get the data into a report, instead every time I open the report it asks me for Products!Trade Price Euros :(
I've never tried doing complicated calculations in Access and would reallly appreciate any suggestions you guys could give me.
I tried to attatch the database but its 508kb so if anyone has a spare second and wants to check it out heres the link http://www.jeron.co.uk/Products.zip
once again thanks!
View 2 Replies
View Related
Apr 4, 2014
I have a query in which some of the field names were assigned a while back and don't make a lot of sense to the person who gets the report so I give them new labels in the query...for example:
I pull in the field AE_resp_req and in front of that I type in RM Response: AE_resp_req and when I run the query, the name for the field is RM Response and it works great. I have another field called Category_Rating that I pull into this query and I did the same thing: Exam Rating: Category_Rating (field name) but when I run the query it still says Category_Rating and I get no errors or messages..
View 2 Replies
View Related
Jan 15, 2015
I have 2 databases with the same structure, but different data.
I want to put all the data in 1 database.
The problem is that the most important table (clients)has an autonumeric id field, that is used to link the records to the fields of many other tables; so, I cannot delete or change that field without losing connections.
View 4 Replies
View Related
Nov 29, 2012
I am trying to find an average of four fields in either a form or query. Basically I have figures for [Grade 1], [Grade 2] but [Grade 3] is an empty field. I need to include all three field because there are sometimes 3 grades, but a majority are 2 grades. How to do so?
View 2 Replies
View Related
Aug 4, 2005
I ma going to sound a complete idiot with this question, but I have been working on a database for some time now, successfully putting buttons on forms with the wizard, jumping from form to form, form to report, basically the button wizard used to work now it doesn't and I don't think I have done anything stupid. (I hope). The wizard was brilliant, I'm lost without it. How do you restore it?
Thanks in advance guys. :confused:
View 2 Replies
View Related
Apr 5, 2015
I have a combo box with an associated label.
I want to eliminate the label and have the label text be part of the row source of the combo box.
The combo box is based on a select statement.
View 14 Replies
View Related
Oct 2, 2013
I have a report that has multiple fields - 3 of which matter for this discussion -
1.) employee
2.) employer
3.) rateofpay
The employer field contains 1 of 2 options. For the sake of this conversation, lets call it ABC123 and XYZ123
I need to be able to calculate the average rate of pay for ABC123 company, and exclude the rate of pay for XYZ123 company in my report.
I am calculating this in a section footer.
View 2 Replies
View Related