I can use the following to return the last record count of the subform records, but I want the last record count of the VISIBLE records only.
So if records 1-15 are visible then it returns 15
If records 34-49 are visible then it returns 49
Code:
RecordsetClone.recordcount
my form works fine on the first record of the database but now i have added a 2nd record some of the functionallity form the first record is applied to the second. At the moment in my table for each record i have a status field which speifies whether certain data is visible to the user or not. When i select visible = false on record one this is also appled to record 2. I dont want this and want each record to have there own specific status.
For example at the moment i have:
if me.combobox.value = 1
Me.mytxtbox.visible=true
else
Me.mytxtbox.visible=false
endif
This seems to apply the rule to all records not just the current one i am in. If explaination isnt clear i will gladly expand further
I've only recently gotten to know about continuous forms and their use a bit. So for example, I used a maximum number of pre-defined (6) visits. I need to change that still, but during the development of the sales forms I already ran into a problem.
At first I was planning to have a certain maximum number of items to have on a form and create an invoice from that. But of course that would limit the number of items on one invoice which isn't good. So, now I have a continous form which adds a line containing productname, price, nr of that item etc. anytime needed.
In the previous design idea it would have been easy to calculate the total amount of money at the end of the list since the list was predefined. So I could just say invoiceamount = itemID1amount + itemID2amount + itemID3amout etc.
With the "new" design however that is impossible to do since the number of objects is unknown. So how do I create a piece of code which does that? In the continous form I have a SaleID which keeps track of which items belong to a certain Sale and a TotalItemsID autonumber which keeps track of the number of lines (items) which belong to that specific Sale.
So I need to count the total number of TotalItemsID's within a certain SaleID and then have a piece of code which creates a sum of that counted list of items.
I'm new at this, I've found the function Dcount() should be used to accomplish this, but the rest, as of yet, remains a mistery to me.
How to do this?
I have a form that contains a number of tabs, each tab then contains a subform. The basic gist is that there are clients and each client chart needs to be audited to make sure that the every clients chart has all of the correct information in it. So if for example, each client needs an initial treatment plan, there would be a tab called Initial Treatment Plan that would contain a subform (continuous form) displaying all of the clients that are missing this information.
I would like to display the number of records that are being displayed in each subform in the tab next to the name to make it easier for the auditor to know how many which tabs have content to be updated. For example, if there are 10 clients that are missing their initial treatment plan, the tab would read "Initial Treatment Plan (10)".
I was able to get a total number of rows in datasheet view, but I don't know if there is a way to have that field as a hidden field in continuous form view that can have its value displayed in the tab.
I need to check the recordcount in a subform of a navigation frame form in VBA. What is the proper syntax. I have tried multiple things but cant seem to get it. I would rather not use dcount.
View 1 Replies View RelatedI am very new to VBA and I have been self-learning VBA from two month and have been assigned to new project Work Authorization & Lock Out Tag Out.I have table called tblWA & tblLOTO.Basically most of the LOTO/s are associated with WA #, following example
WA # in tblWA
Associated LOTO/s in tblLOTOs
25258
123456
123457
123458
123459
25259
123410
123411
123412
123413
However, both tables are in relationship right now..I have form called WA Switch Board where I have Datasheet View form with all WA records, fields are WA#, WAStatus, WAIssuedDate, IssuedBy, CompletionDate and etc but I have dropdown with with WAStatus with (In Field Today, On-Hold, In Approval, Cancelled, Close).Now from the main switch board when authorized people try to change the status of permit to Closed I want recordset or count to loop through tblLOTO and give me a message box if associated LOTO/s status not equal to Close.In other word, if the associated LOTO/s are not close then the selected WA # in WA Switch Board cant close.Here is the code I have been playing with no success
Private Sub PermitStatus_AfterUpdate()
Dim db As Database
Dim rs As Recordset
Set db = CurrentDb
[code]....
I have a table that has 5M+ accounting line entries. Below is an example of one accounting journal in the table.
BUSN_UNIT_IJRNL_DJRNL_ICNCY_CMONY_A
CB0014/07/20140002888269323AUD16797
CB0014/07/20140002888269323AUD-16797
CB0017/07/20140002888269323AUD16797
CB0017/07/20140002888269323AUD-16797
The journal ID above was an accounting entry, debit $16,797 and credit $-16,797. because it was entered as a reversing journal in the system, the table has captured the Journal ID with 2 dates. For my purpose i only want the one date (MIN) date, the total amount of the journal (either the debit or credit amount 16,797) and the total number of lines the journal ID has so in this instance I want the count to be 2 and not 4.
Right now this is what i get
BUSN_UNIT_I JRNL_I CNCY_C SumOfMONY_A CountOfJRNL_I MinOfJRNL_D
CB001 0002888269 AUD 0 4 4/07/2014
This is the output i would like
BUSN_UNIT_I JRNL_I CNCY_C SumofMONY_A CountofJRNL_I MinOfJRNL_D
CB0010002888269323 AUD16797 2 4/07/2014
Im thinking with the total sum because theres debits and credits is there a way to do the absolute value of the journal MONY_A then divide by 2?
current SQL
SELECT [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, Count([One Year Data Lines].JRNL_I) AS CountOfJRNL_I, Min([One Year Data Lines].JRNL_D) AS MinOfJRNL_D, [One Year Data Lines].BUSN_UNIT_I, Sum([One Year Data Lines].MONY_A) AS SumOfMONY_A
FROM [One Year Data Lines]
GROUP BY [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, [One Year Data Lines].BUSN_UNIT_I
HAVING ((([One Year Data Lines].JRNL_I)="0002888269") AND (([One Year Data Lines].CNCY_C)="aud"));
I have a combobox on my form called TypeOfBusiness, with fields including Corporation, Education, Industry, Non-Profit. In order to make a second combobox called IndustryClassification appear when Industry is selected from the TypeOfBusiness combobox, I have used the following code:
Code:
Private Sub Form_Current()
If Me.TypeOfBusiness = "Industry" Then
Me.IndustryClassification.Visible = True
Else
Me.IndustryClassification.Visible = False
[Code] .....
It works just fine. However, when a user selects both, say, Industry and Education, the IndustryClassification combobox will not appear. What code I can use to ensure the IndustryClassification box will appear regardless if another box is checked in addition to Industry? I am wondering if it has to do with the Column attribute.
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
I have a problem with my database I have a combo box that will search for my record. Actually its working I input the specific number it goes to the specific record. But I want, if there no existing record in my database it will display a Messagebox that "No record Found" I try to put a code in a macro builder in a after update property field but nothing happened.
Expression code that it will display the msgbox if there's no record found.
the given code from macro builder is attached. I try to have an if else statement but I dont know how to not equal that giver conditional expression.
How move to next record (without enter) after fill mask in first record in access form?
View 4 Replies View RelatedI would like to select a record from my combobox dropdown list and have that record populate in my subform. Currently, I am only able to select the 1st record at the top of the dropdown list to appear in my subform. But I would like to select any record from the dropdown list and have it populate my subform.
View 8 Replies View RelatedIs it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies View RelatedAfter I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
View 8 Replies View RelatedI have been looking for days on the net for my listbox problem. It is there and found a few, even on this forum. but when i try the solutions mentioned i am in a total loss and do not know what to change to make it work for me.
I have a form named A/B Retriever with a record source qry input AB Bins Than i have a unbound combobox with row source qry input AB Bins. This populates 8 textboxes with B through I carton boxes, stored in a bin. The user selects a Bin location from the combobox and can put a "x" in a textbox to illustrate that the box is empty. This works perfect.
Underneath the input bin and box part i have 8 listboxes that shows a query that has counted the empty boxes with the corresponding bin location. this also works. but the question from users where, If i click on a, lets say empty B-box at Bin location 12A20, they want the combobox automatically focus on the combobox with the corresponding Bin location. This is a quick way for them to delete a empty box (remove the X).
I have a form that using "Query A" as data source. The Form need add (edit) a field value before save that Query Result to another Tabel. Is it possible to do that?
The PROCESS simply like below: Tabel A --> Query A --> Form -->Edit value a field -->Save to Tabel B
if it is possible, are there some requirements that have to be fullfilled?
I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
I need to know how to auto enter the date of the previous record into a new record. I have this db for my vehicle log sheets and I submit monthly a claim for the business km from my company. I usually cant remember the date of the previous claim and have to scroll back until I find the field with a date. It will be useful if the date was copied into every new record until I edit the date when I submit the claim. What I ask is during the new month all the dates will be the same until I submit the claim. I do not know how to do this, and yes I have done a search.
View 3 Replies View RelatedI have a subform with records of call details (date, time, subject) - the date and time are autogenerated and subject is a text field. After entering text in the subject field and then clicking on the close button in the main form, or clicking anywhere else in the main form, the record is saved to the table. However, if I enter text in the subject field and then move up to view previous records (within the subform) and then click the close button in the main form the record is not saved in the table. How can I either save the record before allowing the user to move to another record within the subform or before exiting the subform set the focus to the new record so that it will be saved on exit?
View 4 Replies View RelatedThe school director is going to input a date (by default today) and a subform will display all of the students who started before that date and haven't been closed as of that date. Next to each name, there will be 4 radio buttons (present, absent, holiday, hospitalized), which by default will be set to present. The director will go down the line, only needing to click when a student isn't present. At the end, she'll push a save button and the new records will be added.
My proposed method:
1. When the textbox with date input is changed, the subform (or just form and I put the textbox in the header?) will populate itself with a query based on student names whose corresponding startdate and enddate work with the inputted date.
2. The subform will be in continuous view so that it kinda looks like a data sheet but it has radio buttons rather than just spreadsheet cells.
3. When the save button is pushed, some visual basic code in the background will look at record 1, grab the student name and selected radio button value, and add a new record to the AttendanceRecords table with the name, attendance type, and date. Then the code will move to the 2nd record, rinse and repeat until it goes through all of them.
Questions/problems:
1. At its core, is this the Access way of doing something like this? Is there a simpler, more efficient, or generally smarter way of doing attendance?
2. How is step 3 going to work? I can look up how to add new records to a table, but I'm not sure how to move around from record to record collecting corresponding data.
3. Since the AttendanceRecord table uses studentID and typeID rather than actual names and actual attendance types, what's the easiest way of adding the new records with that data efficiently? I'm thinking of making the RecordSource of the subform some sort of linked up set of tables such that if I'm looking at record 1 and the name in the textbox on the subform is "Bob" I can just reference studentID in the background without needing anything on the form at all with studentID?
I have a form which has 3 subforms based on a table with a combo box. When I select value from the combo box the data on the subform changes accordingly using the 'Requery'. However, they also show the record from the 1st value of the combo box. Is there a way I can get this solved?
View 1 Replies View RelatedI have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
View 5 Replies View RelatedI have been searching all day for a solution. This is my first time using Access so a lot of this goes over my head. I'm currently running Access2010. I have a form that I am using for when people take office supplies and we can generate a cost per department. All of the Tables, Query and Reports are set up already and surprising work. My form fields are:
Date Created (automatic current date)
Quantity
Item Code (Combo Box that shows Item# and Item Description)
Initials
Department (Combo Box that shows Dept# and Dept Description)
RefCode
Remarks
I am trying to get it to where when I enter a new record it will autofill with all fields expect "Item Code" from the previous record until I change it.
I have created three tables, all of them are connected by one-to-one relationship by same field, as you can see in the screenshot. and at the same time I have created three forms for each table. then I brought two forms in one remaining form. so whenever I entered data in first form and click on the next tab in which another form exist, it gives me this error: "you cannot add or change a record because a related record is in table".
View 2 Replies View RelatedHey all, I was wondering if anyone might know how to obtain a reocrd count, I need to create a PERMIT number based on the number of records in my table. So I need the number of records in my table plus 1, which will then give me half of my permit number, I will then add the 2 last digits of the current year and add a "-" I think I have the date done, but I dont know how to obtain the number of records in my table? Can anyone help? Thanks
View 14 Replies View Related