I have two ways to enter work placements for students, I need to refresh a subform on one form while closing another.
The issue here is the form with the subform may not be open as mentioned above.
So is it possible on closing one form to refresh a subform only if it's parent form is currently open?
I would like to know how to refresh a form on closing event. The forms name is frmDeparturesPaymentScreen. I want to do this in a macro...
View 2 Replies View RelatedI have a form with a subform. There is a close button on the main form which I have applied a key command of Alt + c and when the focus is on the main form it closes the form as you expect. But if the focus is on the subform, using Alt+c does nothing. I am trying to give the user a way to avoid using the mouse (so they do not have to click on the button from the subform. Also it is confusing that the key command doesn't always work in the view of the user, and in reality he is on the subform.)
So my thinking is:
1. Can I create a close button on the subform (and give it the key command of Alt + c) and in the code close the form and subform, if so - how to I refer to the form/subform?
2. Is there some way to apply the key command of Alt + c on the subform to activate the close button on the main form?
I have a form (frmAuditEntry) that includes a subform (sfrmAuditDetail). The user will enter audit information on the subform. There is a check box on the subform to identify containers that had errors in selection. When the box is check by the user, a pop up form opens where the user can enter the details regarding the type of error. The audit number and the container ID are carried over from the main form to the pop up form to link the information.
This is the code I have in the AfterUpdate event of the checkbox:
Private Sub Errors_AfterUpdate()
Dim rs As Object
Dim strBookmark As String
strBookmark = Me.ContainerID
Me.Requery
[Code] ....
This works great and keeps the focus on the record the user checked having errors so the right information transfers tot he pop up form fields. When the pop up form is closed, the focus goes back to the subform but keeps the focus on the container ID control of the record that the user previously checked as having errors (hope that makes sense).
What I would like to happen is this: When the pop up form is closed, I want the focus to go back to the subform but to go to the last blank record on the subform (if the user moved off the record before checking the error checkbox) or go to a new record (if the user did not move to a new record already before checking the error checkbox).
I have been trying to figure out how to make a form refresh after deleting a record in a subform. The code in the combo box that populates the subform works fine. If you select the "Action" of "sign" from the unbound combo box above the subform, it places "Sign" in the the subform and then makes a checkbox on the main form [WillTake] = True.
But when I delete the record by right clicking on the entry, the focus is sent back to the main form so I can refresh the form and thus update the [WillTake] checkbox. I have tried just about everything. I can get the focus to a field on the form, but I cannot figure out how to refresh or requery the form.
The code to transfer focus is on the OnDelete of the subform.
I have included a watered down version of the DB.
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform:
Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Obviously I've done this wrong.
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
View 2 Replies View RelatedI have a form, a couple of comboboxes and text boxes on it. When these are filled out, the SQL of a query is changed using these parameters.
There are three subforms on the form, all pivot charts, all based on the query being changed.
The goal would be to update all three according to the user-given parameters.
Right now the subforms only update if I close and open the form, which is probably not the best solution, since it's too slow.
I've also tried to requery and refresh them, with no result.
Then I tried to overwrite the recordsource of the subforms with the same text that was originally there. This got them to refresh their data, but then all of the charts disappeared and had to be built again, so this is a no go too.
I looking for a simple trick to refresh the data in a subform in vba code?
View 3 Replies View RelatedI have a
- form called "Hauptformular" and a
- subform called "qry_tracking_Unterformular". Then there is a
- button called "cb_filialname".
Now when opening the Database, the form appears with the subform containing the
- query "qry_tracking"
When hitting the button "cb_filialname" the subform receives the contents of the
- query "qry_tracking_FilName", that has a filtering option on the Column "Filiale": "Like [Filialname?]"
Now the filtering works fine with the following Code:
PHP Code:
Private Sub cb_filialname_Click()Me!qry_Tracking_Unterformular.Form.FilterOn =
FalseMe!qry_Tracking_Unterformular.Form.RecordSource = "qry_tracking_FilName"End Sub
-> when you hit the button, the inputbox
Filialname?
appears.
The problem now is, that after having used the button, when I click the "Exit" cross right up there, the inputbox appears again.
I have MDB database linked to SQL SERVER through VPN connection.I created links to the sql server Links are dsnless..Everything works fine but when I lost VPN connection or sql connection has been broken I can't refresh links to the tables.I receive message 3146 sql connection failed..I must close database and start again...
I tried different methods like ado,dao, and vba docmd.transferdatabase,aclink... but no success, table cant be relinked.
Only way I can relink is to change ip adress in conn.string
E.g. 192.124.0.2 (1st ip- router server ip) and after connection failed i can use 192.124.0.32 (2nd ip - server local ip) and that's it if i lost connection for the 3rd time... i must restart application.
It seems that access database keep the previous connection..how to reset or drop database connection to the sql server and refresh links to the tables with vba code without closing access database...
I have an close button on a form that is supposed to Refresh the subform of a different form and then close the form with the close button.
frmOperations - no refresh / requery
subfrmPlants - Needs to be refreshed / requeried
frmPlants - Needs to be closed
Currently the button effectively closes frmPlants, but it's failing to refresh the data on my subform to display any changes that have been made on frmPlants. I've tried with refresh and requery, neither seem to work.
Code:
Private Sub lblClose_Click()
If CurrentProject.AllForms("frmOperations").IsLoaded Then
Forms!frmOperations!subfrmPlants.Form.Refresh
End If
DoCmd.Close acForm, "frmPlants", acSavePrompt
End Sub
I have a form called frm_Incident_Single. On this form I have a subform/subreport called tbl_Incident_Apps_subform. I have a command button on frm_Incident_Single that opens another form called frm_Incident_Apps where I choose multiple selections. When I save or close the form I would like to update the subform - tbl_Incident_Apps_subform.
I've tried to requery/refresh the subform in the save procedures in frm_Incident_Apps but when I save it, I get a syntax error. Here is the line of code:
Forms!frm_Incident_Single!tbl_Incident_Apps_subfor m.Form!Requery
I've tried many variations and can't get it to work. How I can refresh the subform?
I have a "Main" form called frmProjects that sports multiple tabs. One of those tabs is labelled "Milestones", into which I inserted a datasheet subform called frmSubMilestones. The table that feeds the subform is tblMilestones. I established the parent / child relationship between frmProject and frmSubMilestones, and everything is working just fine...
To summarize: frmProject as main form -> Milestones Tab on main form -> frmSubMilestones as datasheet subform on the Milestones Tab (there are other tabs that are not subforms).
I have been asked, for each milestone in the frmSubMilestones subform's datasheet, to capture the number of days spent by employees on a monthly basis. The Milestones table and the PersonDays table have a primary key and a foreign key that are similar.
To summarize: frmSubMilestones as subform -> txtAggregatePersonDays as calculated Textbox fetching data from tblPersonDays -> OnClick event -> FormLoad of frmPersonDays as datasheet PopUp form.
DoCmd.FormLoad is supplied with the usual parameters to make the PopUp form appear, filtered on the currently highlighted milestone. Everything works fine so far... well almost.
Problem 1: When I introduce new rows in the frmPersonsDays datasheet, everything seems fine at the surface, BUT the primary key of the calling form (i.e. frmSubMilestones) does not appear in the tblPersonDays table; this is normal because there is no form-based parent / child relationship between the two forms. As one might expect, I am trying, from frmPersonDays, to get the primary key value from the "parent" frmSubMilestones using the Forms collection. No dice. I surfed and surfed, tried the bang and the dot operators, drank scotch, but nothing worked. I had to add foreing keys manually in tblPersonDays to further my tests. I can't figure out how to reach any control on the calling form, which is a subform.
Problem 2: The calculated txtAggregatePersonDays on the frmSubMilestones works wonders for existing data in tblPersonDays. However, when I introduce new rows in the PopUp form, I also realized that the calculated Textbox in frmSubMilestones is not updated when I close the frmPersonDays PopUp. I have to close the PopUp form and move the cursor in the Main form (frmProjects) to refresh its associated milestones.
I have created a form with buttons which runs queries. The parameters I need for the query are being passed through just as I wish and the relevant query is run correctly. However, if I then press the button on the form with different parameters I get the results from the previous query. I can only solve this by closing the query before pressing the button. Is there an easy way to close the query to prevent this from happening. In case this is relevant, the only data which I am returning from the query is stored in the windows clipboard.
View 6 Replies View Related I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click()
DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs)
DoCmd.Close acForm, "frm_ExportWizardPage3"
End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
I have a bound form with a few fields. I would like to run a sub after some of these fields are modified, but not others. I would like it to run only once, after user finishes his work on the form.
When using the Unload event - the form on the form is not there anymore (or did I get something wrong?).
Is there a way to trap Data on form just before the form closes?
I have an A2007 application running on XP. From main form, Form1, another form, Form2, is opened.
When I attempt to close the application by clicking in the cross in the rh-corner of Access window, I get a crash midway through the OnLoad of Form2. I cannot figure out why the heck the On Load event fires when the form is being closed, and have some difficulties stepping through the code.
I recall having heard of OnLoad firing when trying to close a Form.
I have combo box that lists data from another form (frmCity) . If the required data in not in the list then frmCity is opened, a new record is entered and form closed. The combo box in the first form (which has remained open) does not show the new entry unless it is closed and re-opened. How can I get the new record to show without closing and reopening?
View 3 Replies View RelatedI have forms that show commitments by Client, by Cost Centre, by Provider etc.
If I add new commitments or edit commitments it is done through the Commitments by Client form, as all other forms lead back to this one.
To create a new or edit an existing commitment, it is done through a Commitment Form, which goes into a query (query A)which does all the calculations. My client form has subforms based on Query A, however my other forms (commitments by Cost Centre etc) have subforms which have querys that are based on Query A . I hope that made sense.
My problem is that If I edit a commitment, the client form and subforms refrlect the changes imediately, even though they are open and I can see them changing when I change the commitments. However the other ones don't unless I close them and re-open them.
My navigation within the database is based on once a form has been opened it is set to be invisible untill called on again (i.e. visible = False).
How to requery all the forms without having to close them.
I have a popup called by a subform to add a new record or edit a selected record. I keep getting "Runtime error 32502". The value you entered isn't valid for the field "|"
I have no required fields and all the drop down related fields have the right value type in them (That I can find)The only "|" reference I can find is in the OpenArgs content below when I load the form. If I'm adding a new record I pass two fileds via the OpenArgs
Private Sub Command52_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", , , , acFormAdd, OpenArgs:=Me![DebtorId] & "|" & Me![MatterId]
End Sub
or if I'm modifying a record from the subform on click I
Private Sub Text38_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", acNormal, , "[Transactions].[TransId] = " & Me.TransId, acFormEdit
End Sub
Below is the Popup Load code
Private Sub Form_Load()
If Me.DataEntry = True Then
Me.VariableHeading = "Add A Debtor Payment"
[code]....
I have a search form (Form1) that sends the results to another form (Form2) using OpenArgs.
When Form2 opens with the filtered records, it may display 1 or more records (for example, the order number searched for in Form1, the customer may have bought 2 items)
So with my 2 records displayed in my continuous Form2, I have included a bound check box that can be checked by a sales team member of staff if we need to send a replacement item(s).
If the sales person has started the process and checked the box for both records but decides to close the form instead of reordering the goods for the customer (hometime) and decides to Close Form2.
How do I program Access to uncheck both boxes so the table is not updated with the check for each of the items, as this will start a chain reaction and the goods will get packed and shipped. It currently just unchecks the first record if I include Me.ItemSelectedResend = False in the Close form vba code.
I thought about just including a message box on the screen prompting the user to uncheck the boxes before closing, but surely there must be an automatic way in which I can do it.
Below is some code that I'm struggling with and I get an error message "Type Mismatch".
Description: The database contains multiple projects and the subset of each project is a release. The "PublishedNumber" can't be a duplicate within a release, but it can be a duplicate within the table where the data is stored. There can however be multiple occurrences of 0.
Here's my code:
Dim stLinkCriteriaRelease As String
Dim stLinkPublishedNumber As String
Dim DuplicateNumber As Variant
stLinkCriteriaRelease = "[AssociatedRelease]=" & [AssociatedRelease]
stLinkPublishedNumber = "[PublishedNumber]=" & [PublishedNumber]
[Code] ....
I have a form that has a check box on it. For some reason the check box is not being checked when an update query is run prior to load. I issued the 'Me.Requery' command after the update query is run (via 'On Load' and 'On Open' in the 'Event' property . . . neither worked) of the form. Is this the correct way to refresh a form after an update query is run ?
View 8 Replies View RelatedHow do you refresh all of the data on a form when the tables that are the source for dlookup fields on the form are changed by command buttons on the form?
View 1 Replies View RelatedI have an Access 2010 database with a form that allows me to input data which is saved into two tables (i.e. Orders and OrderDetails). I use a simple select query to bind the form to the tables.
When the form loads it asks for an order number, which it uses to pull details from the Orders table and auto-fill some fields on the form (these fields are not enabled as they are predefined, such as the order date).
So, when the order number is entered my VBA code does a Form.Refresh, which then breaks the code with the Run-time error 3022 - "The changes you requested to the table were not successful yada yada.." (I'm sure you all know the one)...
I have checked that there are no duplicated keys in my tables, I have checked that what should be indexed, is indexed. I have done a compact and repair on the database, and even created a new database and imported all the tables (used new data). Still get the same issue.