Forms :: Search For Multiple Values In Single Field
Apr 21, 2013
I have a table in which there are approximately 15k records. The name field has approximately 2500 unique values. I need to search the table for multiple names and return the results from the table. This would then be used as a report. Due to the users being very novice, a form is needed for the search.
Example:
Search for Smith, John; Wilson, Bill; Jones, Jeff
Return
Name Year Brand Make
Smith, John 1999 Oldsmobile 88
Smith, John 2001 Chrysler 300s
Wilson, Bill 1994 Porsche Carrera
Wilson, Bill 2007 Kia Sporty
Jones, Jeff 2004 Chevrolet Camaro
Jones, Jeff 2011 Chevrolet Impala
My knowledge of forms is basic, however, I can be a quick learner if on the right track.
I am creating search boxes within that searches customer by lastname, phone number, address and suburb. Will I be able to use one search button for all of them or do they have to be individual buttons?
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Currently we track areas of non-conformance for a fleet of flight simulators. Each flight simulator has a particular ID number. In some instance an area of non-conformance is associated with a single simulator, at other times it is a fleet wide issue and applies to all or some simulators. In order to track as well as advise leadership and the contractor responsible for maintenance of the simulators of the situation we generate individual response letters.
In order to track each instance of non-conformance my idea was to create a new record for each deficiency. In the event that it is applicable to multiple simulators I would like to fill out the form with all pertinent data and then place a checkbox associated with each simulator and when the record is saved, it creates one record for each simulator with a checkbox ticked.
Once the deficiency on each simulator is fixed, I would check a box for a field called rescinded, which would remove that particular deficiency on that particular simulator from the active list of deficiencies but the others would still remain because they are associated with unique records.
I have a data base with names, email IDs, phone numbers of 5 types(example quality, security, IT,finance etc) of person from ten different project teams. I created a basic form for the end user to enter values and created fields for each of the person's name, email ID etc based on the personal type( liek quality, IT, finance etc) on each team. The background table contains records of almost 200 people now.
All of these people will be trained for one task and some will be trained for multiple tasks. I know how to make the combo box allow multiple values/selections but, i cannot list out all 200 personal names in the combobox's rowsource/value list. Is it possible to combine all different name fields and list out all personal(of one team), so that the end user can just select multiple names for that team who have been trained and so on. i need to set the rowsource of the combobox to the values of all personal from one team so the team leader can just go select who has been trained and who has not.
This particular database generally looks at reporting individual records as opposed to summary reports. So for a particular data record i have the following data [x1][x2][x3][x4][x5][y1][y2][y3][y4][y5]
I need to chart (scatter) these figures as paired x,y variables for display on a feedback report such as
x1,y1 x2,y2 x3,y3 x4,y4 x5,y5
For some reason i simply can't wrap my head around haw to make this happen.
I want to have a box with yes/no choices defining the Lessons a Student chooses. Sth like this Because the Lessons are quite plenty and they change from time to time, I don't want to have them predefined in the Sudent table, but to have a related table containg the Lessons providing more flexibility. My problem is how to assign the Yes/No values from the form to a single record. ANy suggestions? A first thought is to create a List from Lessons table, with 2 columns. 1st the Lesson and 2nd the Y/N box. Every Lesson would have a value like this: 1,2,4,8,16,32,64... With this way the sum of the Lessons would be unique for each combination and it could be saved in a single record. But such a solution is not so practical. Any alternatives?
My question is this: I am creating a database for a student survey. Some of the questions may have multiple answers. For instance, question 2 reads: "What location/time are you taking courses (select all that apply)"
and the possible answers are: 1)Daytime/Oakland 2)Evening/Oakland 3)Saturday College 4)BC
- Where a student could be taking classes at multiple locations or times. I am completely lost as to how to set this up. I have tried to set the properties for the field on the form to accept multiple responses, but of course, these do not save to the table and so it's completely useless.
I have question regarding multiple choices fields. I would like to store constrained but multiple values in a single field. I used the assistant to create the multiple choice field in the table, but I'd like to have it displayed in my form with check boxes (more readable in my tabular form) instead of drop down list. Is it possible ...
Basically, what's the best practice or how do we store a query's value into an array then checking what the max or min value is and how to check if let's say "4" is in the array?
I have set up a parameter query in Access 2003 that asks the user for the "Section", such as "Admin", "Accounting" etc.
I need them to be able to respond to the prompt with more than one section if they want- sometimes just one, sometimes two or three or four.
So they can get "Accounting" and "Admin" both in the records that are returned.
The code: SELECT T_ElainesMaster.Section, T_ElainesMaster.Login, T_ElainesMaster.Workstation, T_ElainesMaster.NT, T_ElainesMaster.Barcode, T_ElainesMaster.[PC model], T_ElainesMaster.[Emp Name], T_ElainesMaster.[swap or not], T_ElainesMaster.[Exp Date] FROM T_ElainesMaster WHERE (((T_ElainesMaster.Section) Like [What section would you like to include?])) ORDER BY T_ElainesMaster.Section;
I have a query that displays all records. I need it to limit based on multiple criteria in a single field. I.E... instead of all employees from every section, I just want it to display employees from section A, C, D, F one time and next time maybe go with section B, C, D. For some reason the solution eludes my little brain.
A user wanted to key in the data in a single form where she can select where a particular procedure is located. The procedure could be duplicated and placed in a few departments.
My tables are as follows:- tbl_Proc_Dept:- ProcNo - Text (Primary) TrgConducted - Yes/No DeptAbbv - Text (Primary)
tbl_Dept:- DeptAbbv:- Text (Primary) DeptDetails:- Text
I created a form where i have the following fields in the form:- 1. ProcedureNo - Text 2. TrgConducted - CheckBox 3. MainDept- ComboBox (DeptAbbv data field) 4. Finance – CheckBox (DeptAbbv data field?) 5. Admin – CheckBox (DeptAbbv data field?) 6. Purchasing – CheckBox (DeptAbbv data field?) 7. Facilities – CheckBox (DeptAbbv data field?) 8. MIS – CheckBox (DeptAbbv data field?)
How can I add multiple deptabbv field in a single form?
Hi, this question is more about Microsoft Access than it is about ASP. However it involves a database that I am setting up for a website being written in ASP.
I have a table which is going to store business details. Every business belongs to a business category and related subcategory. For example Garages and MOT Centre.
I want to store up to 5 categories for each business. Is it possible to link to the categories and subcategories tables for each of the 5 category fields in the business table?
I am facing an issue with an access table.I have a field named "Contact Dates" , supposedly that field will store in a drop down list all the dates that the contact with the related company was made, how can I store it ? I am using in the current moment a memo data type to store the data and a comma for splitting them. How to create a drop down list for storing and displaying all the recorded dates and recording all the new data values as date format.
I am designing a database in Access 2010 to handle customer discounts. The problem I am facing is that the discount can vary by customer. One could be a straight percentage based on certain sales totals, even the percentages can vary by customer, and some customer discounts are tiered. I was hoping there was a way to handle all through one query, because there are so many variations, it would require several queries if I separate by each calculation available.
Is there a way to set up a table listing the customer and their corresponding calculation expression then running a query using that table and the sales data table to do all the calculations. Or is there another way to handle this level of complexity in Access? The end result I would like is one data set with each customer and their calculated discount.
I wrote a database several years ago and recently pulled it out to give to a friend. The problem is, back then (not knowing better) I set the Employee table up with as a single field "NAME". Now, in order to make it effective, I need the Employee's name in four (4) parts (First, Middle, Last, Suffix).
I have several queries based on the "NAME" field and and would like to avoid changing all of them. I have a simple form "frmUpdateEmployees" that populates the Employee table and Name field. I was hoping to change the form and/or add a query that would be easier and more simple.
Table: Employee Field: Name Form: frmUpdateEmployees Queries: 16 that depend on the table and field above.
I have a tblCustomer table to track customer information. One field is for flights the customer books. I expect that a customer might book more than one flight, which should affect what he owes. (My tblFlights table includes fields for the cost of each flight.) How should I make the Flight field in tblCustomer so it accepts multiple flights and reflects on the customer's final bill and my own accounting tables that I haven't even created, yet?
I'm probably overthinking everything. This is just an Intro to Access class, and I only need 3 tables with 1 relationship. So far, I have 9 primary tables, 4 duplicate tables (for M:N relationships) and 11 relationships. I have to have tables for financial data, customer info and product/service info. I wasn't sure what I would need for my fictional airline, so I created tables to track everything I could think of, hoping to cover all 3 required types of data in the process.
I'm trying to create a report that's based on a query, and the query has three fields: [PersonName], [PersonDate], [PersonShift]. This table holds records for people that worked on certain days and certain shifts. What I want to do is create a report that gives a graphical calendar display of each day in a month, and on any day that the person has a record (and sometimes there are more than one), I'd like to see just the PersonShift records showing in that day's box.
tblPersons PersonName PersonDate PersonShift Jason 4/10/14 FIRST Jason 4/13/14 FIRST Jason 4/13/14 SECOND
So if I were to print this report for Jason, I'd get all the days in April laid out like a calendar, and on 4/10/14 you'd see "FIRST" in the box, and on 4/13/14. you'd see FIRST and SECOND in the box. All the other boxes would be blank.how to display the calendar, how to display the dates. I'm able to return records to those boxes by creating 31 separate queries, one for each day of the month, and each query returns records for that day. The queries are added to the report as subreports. It all works beautifully.
The thing is, I'm running 31 queries every time I pull the report. Is there a way to code a single field on a report that will run a SELECT statement on the table using variables that are located in fields elsewhere in the record?
If I have a PersonName field on the header of the report, and I have a PersonDate field in the detail of the report's record, can I create a new field in the detail of that record that runs a SELECT statement on qryPersons, and filters the tblPersons by the PersonName on the header of the report and on PersonDate in the record?
I want a field on a report that runs a SELECT statement on tblPersons, I want the field to return only the PersonShift records for that person based upon the PersonDate. Each of the fields on my report have a CalendarDate field, and I want the SELECT statement to return records where the PersonDate matches the CalendarDate, and again, it should only display PersonShift records.
Add and Index named Location to the tblGuest table that consists of the StateProv and City fields and uses the default property settings, Delete the PostalCode Index, save then close the table.
I have looked up all info in the text reffering to Indexing and cant seem to come to a conclusion of the way to complete the underlined area area. For the class they provide you with the files and in this particular file the primekey is Guest ID with a field value of GuestID. There are two other Indexes PostalCode with field value PostalCode and GuestID with field value of GuestID.
Hello friends,I have a pretty noobish question. I was wondering if it was possible to have several (3 in my case) different forms that apply data to a single table? The main table has three different types of data: 1. Client info 2. Services A 3.Services B. Each type of data has about 7/50/12 different fields of data in each set so that trying to include all this data on a single form is not very user friendly due to clutter.I have three forms that input data into the table, however the record navigation command buttons that I have on the forms do not apply the data to the correct record. For instance, when I input the Client info for client #2, and click the "open services A form" command button, the form opens on client #1 Services A instead of to a new record. Is this something I have done wrong, or is it due more to MS Access limitations? Thanks