Forms :: Selecting A Value For A Form From Another Form
Mar 30, 2013
I have a form (formA) with a sub form (SubformB) in it. In this subform there is a field (Candidates) in which I want to write a value by using another form (FormC). Sub form and the other form have different source tables (TableB & TableC).
What I want to do is;
While FormA is open, by clicking the field (Candidates) on (SubformB), I want to open (FormC). This form is a Data sheet. Then again by clicking a checkbox on this form, I want to assign the value to the field (Candidates) on SubformB.
View Replies
ADVERTISEMENT
Nov 13, 2013
I wish having only one record display in a continuous form, after an "On Click" event. The database in which this question lies is attached.
On opening, the user first interacts with Table 1 (Continuous Form), then by clicking on ID on the details for that particular record appear.
What I would like to do is: When the user clicks on ID, only that record whose ID has been clicked on displays first on the continuous form, and then the PERSONAL form opens. To clarify further, my wish is that the sequence of events is:
User Opens Table 1 Form
User Clicks on ID (for example, let's take 2)
Only Record with ID 2 remains on the Continuous form.
Then details for record 2 display on the Personal Form that opens next.
The problem I currently have is with step number 3 above.
View 10 Replies
View Related
Jan 27, 2014
I have combo box in a form. I want to enable (to highlight) some controls in the form after selecting any value from my combobox.
For example, There are three values in the combobox. And :
When I select value1, I want an unbound combobox1 to be enable (This combobox is synchronized with a bound combobox2). So when this unbound combo is enabled, its synchronized bound combo should also be enabled.
When I select value 2, it should do the similar action on a different unbound combobx3 (which is synchronized with a combobox4).
View 11 Replies
View Related
Nov 13, 2013
I am relearning Access and having a little difficulty. I am creating a Access database that links tables from an I series system which I have done trouble free. In the database I have pulled up for example a patient demographic file (hospital). I have form frmSearch that prompts the user to enter the medical record number OR they can search by name. I have a query that takes that information then loads a 2nd form to display the query results in a list box. I would like to be able to click on one of the results from the 2nd form to then load another form that will display all of the patient information that was selected.How do you set this up so that with the results shown, I can click on one of them and it will load that patient into another form pulling the rest of his or her information from the table file?
View 12 Replies
View Related
Feb 5, 2015
Access 2007
Unbound Form
I have a onclick tied to a label (for decoration purposes) that when clicked it launches VBA that essentially updates a form. All that part works except it will not recognize any changed value of the field I was last in?
Just to try to explain best as I can what happens.
- Form gets opened
- I change field (quantity field)
- I click the Label
- It reverts to pre-existing value.
if I click off of the text field first then do the onclick - it recognizes just fine.
View 7 Replies
View Related
Apr 20, 2006
Right.
What I want to do is use a value obtained in the form (obtained from a list-box selection) to select a record in a table, then return one of the fields to a text-box on the form.
All the values coming from the list-box are unique, and the value returned is a simple integer.
Is there any way to do this reasonably simply?
View 5 Replies
View Related
Feb 4, 2005
Is there an easy way to change the font-size properties of all objects on a form?
I guess the first part of this question is there any way to all the form objects at once? (without making reference to each one individualy)
View 1 Replies
View Related
Sep 6, 2006
I have a couple querys that rely on this statement:Like "*" & [ Project Number ] & "*"Now that makes a box pop up for the person to fill in specific information.
Now, is there a way to make a form that a user can choose a job from a drop down box, which then when click "next" it will execute a query with what was selected from the drop down box?
If anyone could help, id be very greatfull!
Thanks
~Jon
View 1 Replies
View Related
Feb 13, 2006
Hi,
Have been developing an Employee DB which includes sickness records and interview information. Have mangaged to sickness records but now I need to link interviews to these specific records which is where I am having a problem.
All sickness records are shown on a sub form and I attached a button at the end of each record so that I can can add interview information that is linked to the sick record through SickID but just cannot get it to work.
Have attached relevant forms and tables and could really do with some help as am pulling my hair out here.
Cheers
View 2 Replies
View Related
Jul 13, 2006
I have a problem I should be able to solve, but I can't think my way around it.
I need to automate a series of tasks to perform the following:
1. The user clicks a button on a menu form and arrive at a select records form.
2. The user makes choices regarding the contents of certain fields (blank, not blank, equals a text string, etc.) and presses OK.
3. On the OK click, the fields are applied to a query, the results of which are exported in an excel spreadsheet.
I've been doing step 2 and 3 by hand in that I alter the selections in the design view of the query and save it. I then run a macro that deletes the data in the current table, runs the append query with the new criteria, and creates an excel spreadsheet of the new data.
However, I now have to make this functionality available to a non-tech person, thus the need to create a GUI menu that can launch a form on which the user can select options and with a single click, launch the macro.
I've tried adapting select forms that I've used with forms and reports using the doCmd.openquery, but they will only work for select or crosstabs, not appends. I considered having the form create the query and then qrite the append query off that, but I can't seem to get that to work.
Can anyone give me some direction on where I can take this?
Thanks.
Susan
View 1 Replies
View Related
Sep 13, 2005
I need a form for selecting input files. I already have my VBA code, queries and so forth for what I am going to be doing to my files, but now I need to have a form that will allow me to select different files for processing.
Does anyone have a sample, a snippet of code, or suggestions as to how I can achieve what I'm looking for?
Thanks in advance!
View 3 Replies
View Related
Apr 13, 2005
I have an unbound combo (because it is synchronised with another unbound combo box) box that selects a record, but I can not get it to update the rest of the form to show the required data.
The form looks up project data from 3 seperate tables which are all linked by relationship.
What do I need to do to make this work?
Thx for looking.
View 2 Replies
View Related
Feb 16, 2014
I want to select a subset of table called TRP. It should extract me all records
which got the property Valid to date < enddate.
enddate is a date selected by the user in a form .
Somehow it doesn't recognize the enddate in the following :
Code:
Public Sub test()
DoCmd.SetWarnings False
DoCmd.RunSQL "SELECT TRP.* INTO [TEST] " & _
" FROM TRP " & _
" Where TRP.[Valid to] < enddate"
DoCmd.SetWarnings True
End Sub
View 14 Replies
View Related
Jul 7, 2012
I'm pretty new to Access 2007. I have a form and in it there are data entry records including a combobox.
I'd like to select a value from the combobox, say "1" and when I do I would like all the information on that form to be duplicated in a new form.
I'd also like a message to pop up saying that info has been duplicated and that the user must update some of the fields.
View 1 Replies
View Related
Nov 10, 2014
I have form 1 that brings up a record, I then open up form 2 with that record details.
On the 2nd form I have a 'status' combo box with values 'OK', 'bad', 'unsubscribe'.
I want to change the value of a checkbox, 'Active', on the 1st form, 'Maildelivery', from true to false if the combo value is changed to 'bad'
Here's the code:
Private Sub cmb_status_AfterUpdate()
If Me.Status <> "OK" Then maildelivery.Active = 0
End Sub
View 3 Replies
View Related
Dec 12, 2006
Folks,
can someone help me on this? I am not sure why the select query inside this procedure is not working. Here is the that routine:
Public Sub temp()
Dim strDocName As String
Dim strTableName As String
Dim strTbl As String
Dim aot As Access.AccessObject
Dim strSQL As String
Dim rpt As Report
Set rpt = CreateReport
strTbl = Forms!frmSearchBoilerGuar!cboTypeOfGuar
For Each aot In CurrentData.AllTables
If aot.Name = "strTbl" Then
strTableName = strTbl
End If
Next aot
strSQL = "SELECT tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, " & _
"strTablename.memGuranItem , strTableName.memLDs FROM tblProjts1 " & _
"FROM tblProjts1 LEFT JOIN strTableName ON" & _
"tblProjts1.intProjectId = strTableName.intProjectId"
rpt.RecordSource = strSQL
strDocName = "rpt"
DoCmd.OpenReport strDocName, acPreview
End Sub
Basically, I am trying to select a table name from the combobox and then use that table name for my query. Then I want to use that query as a recordsource for my report.
Any help is greatly apprecited.
Shan.
View 2 Replies
View Related
Apr 6, 2008
I have a field on frmOutpatient which is called EpisodeID.
I need to populate this field from a selection in a pop-up form.
The pop-up form (frmSelect) is a continuous form with a number of different EpisodeID numbers according to the date the patient was admitted. At the end of each record I want to put a command button (cmdSelect) and when pushed I want this SelectEpisodeID to be transferred to the field on the frmOutpatient.
Any ideas??
View 6 Replies
View Related
Dec 29, 2013
I am trying to use a list-control on a form to let the user select multiple values. I have understood that this requires some VBA-code to step through the selections in the list, since the "multivalue-selection" is set to "Extended".
When I try to execute the code I have (found and have tried to adjust), then I get the error message "Object required". The "ListCount"-paramater always only results in a ZERO-value, when i step through the code:
Function cmdOpenQuery_Click()
On Error GoTo Err_cmdOpenQuery_Click
Dim MyDB As DAO.Database
Dim qdef As DAO.QueryDef
Dim i As Integer
Dim strSQL As String
[code]....
View 9 Replies
View Related
Sep 11, 2014
The input form of the database have one common table containing data for all parameters for row source. As all data was in one table had one ID. My problem is I am trying to run reports from a form after selecting dates and parameters.
For selecting parameters I created dynamic combo box. For dynamic combo box I needed ID and description of the parameters. So I created separate tables for each parameter with ID and Description column. Which ran me into the problem that when I run report based on main input form which has different row source table and my report form has different row source tables and reports doesn't run when I base my queries on the report form.
View 2 Replies
View Related
Apr 25, 2005
Trying to update a field in a record in my form after selecting from a comboox.
This an orders form with a record per row for order items. I select the product from a dropdown list which is populated by a dynamic query from the afterupdate event on another combo. When I do the selection access reports the following error:
Runtime error 3331
to make changes to this field, first save the record
Debug takes me to the line :
Me!product_id = DLookup("product_id", "products_table", myvar)
from :
[code]
Private Sub comboProd_description_AfterUpdate()
Dim strFilter As Integer
comboProd_description.Value = comboProd_description.Column(1)
myvar = comboProd_description.Column(0)
Me!product_id = DLookup("product_id", "products_table", myvar)
[end code]
I'm lost as to what to do (no such thing as beginners luck!!). I'm not even sure if the error is from the combo box or from the field that it is trying to update (product_id)
Thx for looking
Kev.
View 1 Replies
View Related
Sep 18, 2012
I have setup a simple access database consisting of 3 tables
Volunteer
Id (PK)
Name
Job
Id (PK)
JobName
Link
Id (PK)
VolunteerId (FK)
JobId (FK)
There is a one to many relationship between Volunteer and Link and a many to one between Link and Job
I want to create a form from which I'll select a Volunteer Name and then choose a JobName from a list box of options and have it create an entry in link with the id of the volunteer selected and the id of the job selected
So let's say there are 5 entries currently in the Job Table.. let's call the JobNames A,B,C,D and E.
In my form I select my name from the list (sourced from volunteer.Name) and then select B from the dropdown. My desired result would be a single entry gets created in Link with VolunteerId = 1 (representing me) and JobId = 2 representing the selection of B. Problem that I am having is that after I select B in the dropdown it creates a new record for B in Job and the Link table gets updated with that JobId as opposed to simply using the one that was already in the table.
View 1 Replies
View Related
Oct 13, 2015
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
View 5 Replies
View Related
Mar 26, 2013
Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
View 5 Replies
View Related
Apr 14, 2015
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
View 9 Replies
View Related
Aug 27, 2014
On the form: User enters first name, then last name. Upon updating the last name field, I would like another form to pop-up and display all the people with that same first name and last name that the user just entered.
On the pop-up form: All of the matching first names/last names are listed with a button control beside each record that says 'Select'. The user clicks the select button beside the record he/she wants. This pop-up form closes and all of the data from this selected record is now showing on the original form.
So far, I have a query/form that pops up only showing the matching first/last names. I'm having a hard time getting my original form to auto-populate with that record that the user selects on the pop-up.
(Also my main form is actually a sub-sub form - so in my trials I could've been massacring my syntax trying to point to it.)
View 5 Replies
View Related
Sep 16, 2011
I created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
View 9 Replies
View Related
