Forms :: Subform Visible / Invisible Based On Control
Jun 18, 2015
I need to have a subform that shows up smack dab in the middle of my main screen when visible - which is what I want - but only based on a specific value of a control on the main form. Specifically, if a control's value is "See Spreadsheet", I want the subform visible front and center as it contains the link to the server location for that specific record. If the control's value is not "See Spreadsheet", I want the form to be invisible.
My code:
If Me.BudgetsFacultyAccountNumber = "SEE SPREADSHEET" Then
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = True
Me.BudgetsFacultyServerLocation.Visible = True
Else:
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = False
Me.BudgetsFacultyServerLocation.Visible = False
End If
The red lines result in an MS VBA error: "Compile error: Method or data member not found."
I've tried referencing that subform a hundred different ways, but I can't get it to work.
My company has a new database that we will use to track PTO (paid time off/vacation), including the submission/approval process. Not everyone should have access to the approval dashboard as that should be restricted to only managers. Everyone will have the same basic form so that they can see their PTO history, hours remaining to be used, etc.
What I want to do is have a button on the form that is visible only if the person is a manager. The button will open the PTO approval form. How can I make a button visible/invisible based on user access levels?
I was able to use coding for making controls visible or not in the attached database.
I have a main form with a tab control that has 3 tabs with subforms in them.
What I am not able to do is in the Tab Control I want the 3rd tab to be invisible and on the second tab where it says “May we go through the questions now?”, I have a check box. When that check box is checked I want the 3rd tab to become visible.
I am having problems figuring out this code to reference the Tab Control Page.
I am trying to make a subform appear when a particular entry is selected from a list box. I did a test... no problem. In my real database... well, you know. Here's my code:
----
On my main form property:
Private Sub Form_Open(Cancel As Integer)
DoCmd.Maximize DoCmd.GoToRecord , , acNewRec
If Me![ProjectSubType] = "Commercial Chest" Then Me![CommercialChestsSubForm].Visible = True Else Me![CommercialChestsSubForm].Visible = False End If
End Sub
---- On my list box property:
Private Sub ProjectSubType_AfterUpdate()
If Me![ProjectSubType] = "Commercial Chest" Then Me![CommercialChestsSubForm].Visible = True Else Me![CommercialChestsSubForm].Visible = False End If
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
Form 1: I have a combo box on my main menu(MenuMainF) called cboCompanyType with typical values 1,2,3,4,5,etc......
Form 2: I have a command button on my administration menu(MenuAdminF) called cmdDevelopment
My goal is to have the cmdDevelopment button of Form 2 be visible if cboCompanyType on Form 1 is equal to 1,2,3, or 4, but if it is any other value, then cmdDevelopment should be not visible.
I have tried searching a few threads, but can't get the answer or perhaps i'm tired. Anyway I have a YES/NO field and a command button. I want the button to be visible only if the yes field has been selected. No = invisible button.
I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.
List box - lstCatergories Main Form - frmSuppliersSummaryCategories Subform on Main Form - frmSuppliersSummaryCategoriesSubForm
The Subform contains the text box CategoryID
Here's my code which nearly works...
Code: Private Sub cmdFilterSuppliers_Click() On Error GoTo Err_cmdFilterSuppliers_Click
Dim strWhere As String Dim ctl As Control Dim varItem As Variant
[Code] .....
My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:
My question is how can I make data in a form visible or invisible just by a button. In other words, if I have a group of buttons, based on the button selected I would want certain data to appear.
I know that this is possible, I have seen it done but just cannot find out how to do it or what this is called to look it up in Helps.
I have a continuous subform which queries a table of attachments. I'm using Access 2007 but not using the Attachment datatype; this DB will grow considerably and I don't want to waste precious space by filling it with bulky files. So instead, I have code which makes a copy of the attachment and adds the hyperlink (to the copy) to the table instead.
Now - I want to add a control to the subform to display an icon / image reflecting the file type of the attachment (Word doc, Excel s/s, PDF etc.)
But not sure how to go about it.
I was thinking I could use FileSystemObject.GetFileExtension at the point in the code where the attachment is added, and add a new field to my attachments table (i.e. translate "*.xls*" to "Excel", etc.) Then store / embed a handful of images for the core types I would expect and use an image control on the subform to display the image based on the value of that field.
But is that even possible / feasible?
Or, is there a handy API which can retrieve the icon associated with a file type based on what has been installed on the local machine (even if there is, there's still the problem of setting up the image control to display the appropriate icon specific to each record...)
Or, is there another control available which would be better suited to something like this than an Image control?
I've accomplished some simpler things like hiding fields based on the data in another field but nothing very complex. To the point: I have a report that shows data in both rows and columns, the report has a 7 columns, 3 of which could or could not contain data other than zero, in which case the column is not displayed. The problem I have is that it could be any of those three at any given time depending on what data is available for that report and what the user wants to see. Basically, if a given company has no data regarding column "A", then column A is hidden, but the main grouping is done through rows so all companies contain at least 0 for all columns (what I did is that, if a field sums the whole column returns 0, then the column is not visible). What I need to get working is the second part of this, have the columns rearrange themselves depending on which column is hidden (it could be that all 3 are hidden). How could I make this work? (btw, autoshrink is not usefull for this since it only shrinks vertically, not horizontally).
I run a merge process from VBA code to create word documents. I would like to add 2 word tables to a document and only show them based on some parameter or mergefield in the data.
Can a table be identified? Like Table 1. And can it be made invisible?
I know there have been a good number of questions about visibility in forms already but I couldn't find a solution to my problem (or maybe I just didn't get it).
Basically, I have a tabular form (more than one record displayed at once) and one the field is of the Yes/No type. For each record, I'd like to have a text box that displays 'pending', set as visible if the field value is 'Yes' and set as invisible if the field value is 'No'. The table is as follows: id : auto-number Flag: Yes/No [Yes]
If I use the following code on the Flag button: Private Sub Flag_AfterUpdate() Me.pending2.Visible = Me.Flag.Value End Sub
all the 'pending' text boxes appear and disappear together (instead of just the relevant one). I thought of using another text box, with the same data source ('Flag') but which would set itself to visible or invisible wrt to its own value but I couldn't find a way to do it.
Any suggestions ? Thanks in advance ! and many thanks already for the forum and the contributions - it's been extremely helpful, esp. for a beginner.
I have two option buttons, 1_optn and 2_optn. I have two subforms, 1_frm and 2_frm.
When clicking the little round dot (the option button) for 1_optn, I want the subform 1_frm to become visible. Likewise, when clicking 2_optn, I want the subform 2_frm to become visible. In the properties panel, both forms visibility is set to No.
I have tried creating a Macro and the best I've gotten is using the OpenForm function but that opens up the forms in a new window. I'd set the Macro to the OnClick event for a combo box (as I couldn't get the option button to work) so when "1" is clicked, the form would pop up. But they have to be in the same form. No pop ups. It also has to be an option button, not a combo box or list box.It also has to be a Macro. No Event Procedure coding unfortunately.
I am trying to improve my code by making it more readible. The following code works, but it is certainly not the most efficient way. I`m trying to write a loop to make certain elements in an Access report visible/invisible, but I can`t address the visibility property of these items while iterating over i.
I have a combobox on my form called TypeOfBusiness, with fields including Corporation, Education, Industry, Non-Profit. In order to make a second combobox called IndustryClassification appear when Industry is selected from the TypeOfBusiness combobox, I have used the following code:
Code: Private Sub Form_Current() If Me.TypeOfBusiness = "Industry" Then Me.IndustryClassification.Visible = True Else Me.IndustryClassification.Visible = False
[Code] .....
It works just fine. However, when a user selects both, say, Industry and Education, the IndustryClassification combobox will not appear. What code I can use to ensure the IndustryClassification box will appear regardless if another box is checked in addition to Industry? I am wondering if it has to do with the Column attribute.
I have a form which I use for call logging. I have created a subform which, when a client reference number is selected from a combo box in the main form, the client details appear (address, telephone number blah). It works fine but for purely aesthetic reasons, I want to make this subform invisible and create text fields in the main form bound to the text fields in the subform.
This I know how to do...
...making the subform invisible I do not!
The reason I want to do this is because I can't get the subform to look "nice" on the main form...with bound text fields on the main form I would be able to line them up nicely with existing text fields...
Hope someone can help or at least suggest a better alternative!
I have a subform (in form view) in a form that is used for data entry. When I open the form the subform is blank except for the navigation controls. The navigation controls are disabled though. If I switch to datasheet view I will see the column headers but there won't be any place to type data (no white boxes). This doesn't happen if my master and child fields aren't set up, but obviously that will show the wrong data and create other kinds of entry problems. Right now the tables are empty so that could be part of the problem, but I shouldn't have to manually enter a record so my form will look right.