I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
View RepliesI have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
View 2 Replies View RelatedI'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
View 1 Replies View RelatedI'm using a navigation control with 3 tabs. I would like to open a specific tab after the user login. I tried this but it does not work:
NavigationControlName.Tabs.Item("tabNameToOpen").S etFocus
I have tried:
Me.NavigationSubForm.SourceObject = "FormName"
then the form change but the tab selection no!
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
i have one form with 4tabs with name frmMain and one button open form frm1.
if i close frm1 i want open frmMain to 2tab
can i do this?
thanks :p :p :p :p :p
I have on one of my forms a tab control with 5 different tabs on it. Each of the tabs has a different set of fields but all from the same table. I was wondering if it is possible to hide a tab if none of the fields on it have any data in?
So for example tabs 2 and 3 have data on them but tabs 1, 4, and 5 dont. I would want to hide tabs 1, 4 and 5.
Hello,
I would like to hide some of the tabs of my tab control on load, and make
them visible only later via another event.
How do I hide individual tabs vs. the entire tab control?
Thank you.
I have setup a tab control with three tabs. Can I use a command button placed on tab #1 to switch the focus to tab #3? If so, how?
View 1 Replies View RelatedI have a form with a lot of data structured in tabs. Since the tab loads all the data at once while the navigation form browses to the desired form. I have tried but the issue is the Master-Child link. The form in the navigation form is not considered as a subform, hence, no way to set a Master-Child link. The navigation form itself is the subform but even when setting up a link there it has no influence on the form displayed by the navigation form.
[URL] ....
I am creating a database in which to store my data collected in my research. I have 8 tables that are linked by a SampleID number. I have created a form which has tabs, the first tab contains the information required for entry on table 1; how I am going to add the controls from table 2 onto the second tab.
I know how to make additional tabs and I have created a separate form for table 2 with the form wizard, cut and pasted the fields into the second tab on my first form BUT how to establish the source for those controls back to the second table. To make matters worse (of course not to be too dramatic here) I can see the other table in my Field List of related tables.
I' ve created an index (catalog) for the books in the database using a tab control and the code:
Private Sub TabCtl21_Change()
If (193 + Me!TabCtl21.Value) < 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(193 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
'for english characters chr=97
If (193 + Me!TabCtl21.Value) >= 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(194 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
If Me.Recordset.EOF Then
MsgBox ("There are no books for this letter!")
End If
End Sub
It works ok but please take a look at the attached image to see what is happening after clicking two or three times the index letters.
After the tab's caption is "erased", if I pass over the mouse is being corrected.
I tried the repaint and refresh commands but neither worked.
Can anyone help?
I have a master form named frmCustomer. I then have a set of tabs (not the navigation tabs) embedded within frmCustomer. The tabs are Invoice (frmInvoice), Contacts *frmContacts), Notes (frmNotes) and Orders (frmOrders). All form are Single Form. There is another form named frmInv that displays an invoice in a formatted manner. frmINV gets its data from a q1uery called InvQ.
It has a criteria that reads [Forms}![frmInvoice]![Invoice_ID]. I placed a button on frmInvoice that calls frmInv. If I run frmInvoice separately outside the tab the correct invoice displays. If I click the buttom from within the tab I am asked to enter the vale of [Forms}![frmInvoice]![Invoice_ID]. How do I call the frmInv form from the tab?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
Please see the screen shot attached.
I have a single form with multiple tabs. At the top of the form appears the name of an individual and below the name are multiple tabs containing information specific to that individual. Each tab has a separate underlying table, which is the data source for the information contained on that tab.
As best as I can tell, I can only use one single data source (a query at the moment) to populate all the data that appears on all the tabs. Is there a way that I can have a separate data source (namely, a table) for each tab?
I have navigation form with 2 tabs I'd like to limit access to users with certain type of account.
There are 2 tables in database that contains user names and types of accounts (tblSecurityLevel and tblUser), and they are used to set user name, login and security level.
It works this way: when you open form, it checks if PC name corresponds to name in UserLogin field (tblUser), if it does it gives appropriate access level depending on set user security, if PC name is not on the list user will be logged as guest.
So far, I used this code and it works great for limiting access to 1 tab:
Code:
Private Sub Form_Load()
Dim UserLogin As String
Dim userLevel As Integer
UserLogin = Environ("Username")
Me.TxtLogin = UserLogin
[Code] ....
Is there a way to expand the code and add second tab (or even third) with this table structure (I'd like to be able to keep login which 1st checks for pc name).
I have an Access 2003 database. I have a form with 5 tabs. I want to prevent some users from editing data on some of the tabs.
I added some logic to the OPEN property of the parent form but it does not work. "Object doesn't support this property or method." What is the correct way of controlling access of the data on the tabs?
In the logic below I first determine the user's permission for each tab. If the user has read-only access they will not be allowed to edit anything on this tab. There are 50 fields on the accounting tab and a subform. If possible, I don't want to have to specify each field individually in the code. Plus there are 5 tabs with numerous fields on each.
BTW: [add designer] is the parent form and [accounting] is the tab.
If DLookup("[permission_studentacct_ReadOnly]", "Users", "Contact_ID = " & Forms![Global]![UserID]) = True Then
Forms![Add Designer].[Accounting].AllowEdits = False
Else
End If
I want to create a form that incorporates a number of different tables & tabs. When I switch tabs (which represent the information on the different tables) I need it to be consistent with the main table and all the information that follows it from the different tables.I've been told the best way to do that is with a parent form but I haven't been able to find an EASY step-by-step instruction on how to do that.
View 2 Replies View RelatedI have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
Tab1, listbox1:Field1, Field2, Field3, Field4
Tab2, listbox2, Field1,Field2, Field5, Field6
Tab3, listbox3:Field1, Field2, Field7, Field8,Field9
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
I have a main form with multpile tabs - each tab containing a different subform.
Link Master Field: ClientID (field in Master Form)
Link Child Field: Client ID (field in all subforms)
There is another field that all the subforms (continuous type) have: ObligorName. All the subforms are based off of a huge table (subtable) with fields: Obligor Name, Address, Zipcode, City, DOcuments Required, Bank Account Number, etc......
Essentially, the user will fill in the 10 obligor names associated to ONE client on the first subform on the first tab + address + zip code + city.
When the user clicks on the second tab to fill out the next subform, I want all 10 obligor names to be there already, so then they can fill out Documents Required + BAnk Account Number.
If I fill out the first subform and then exit out of the form and then reopen it, the other subforms autofill.
HOWEVER, I dont want to have the user have to do this. It wastes a lot of time. What can I do about this so that the table is automatically updated right away. They are all based on the same table so I do not see why there is so many issues.
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
I have an access form with tab control pages each with embedded forms.In one page I have a list of records as a datasheet form with the record identifier field configured as a hyperlink. When I click on this it passes its value to a form field in the form in the following tab page (works without the hyperlink but its a useful way of highlighting which field to click) which is a display/edit form of the details of the individual record. The Subroutine which does this sets the focus on this field it is passing the value to on the other form and the 'On Got Focus' event in that triggers the query that fills the editor form.
When I click back on the following tab to select another record to view/edit, the identifier value of the other record is passed to the other form but the data displayed in the rest form doesn't change. I understand this is because the field with the 'On Got Focus' never lost focus and so the query function was not called. To correct this I tried adding the same function call to the 'On Change' event however this does not work (the field is a text box set to 'locked' if that is relevant).I can get the form to do a new query properly if I click on a different field in the form before going back to the list tab or (as this is removing the focus allowing the On Got Focus to work again) if I click on a button to select a different record (which just takes me back to the list form).
Is there any way I can get this to work without having to manually remove the focus from the problem field? I have tried setting its On Got Focus event to move the focus to another field after the query function call however this prevents the Setfocus line in the code in the previous form from working. Here is a snippet of my code below.This code is for the list form and passes a value to the editing form:
Private Sub SalesID_Click()
Forms!Mainform.Requery
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.Value = SalesID.Value
Forms!Mainform!Sales_Admin_Form.SetFocus
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.SetFocus
[code]....
I am releatively new to using Access. I have a form created and linked to tables. I would like to know if there is a way to have the form automatically tab to the next field for me. I have several fields that have the same number of characters entered for every record. I would like it to jump to the next field once I've entered the maximum number of characters in that field. I tried setting the fields in the tables to the length I want, and it does stop me from entering any more than that in the forms, but I still need to press the tab key. Kind of annoying after a while. Anyone know how to do this? THanks.
View 2 Replies View RelatedI am trying to create a simple form with tabs. I want each tab to read from different tables.
I created the Form
I droped the Tab Control on it and made 2 more tabs
Now I want to add Text Boxes and populate them with values from a specific table. In the Control Property of each Text Box I set it to =[Table]![Field] and I get #Name?
I cannot seem to link the Text Box back to the specific table.
Once I do that I want to be able to Goto Next, Goto Previous etc.
CAN ANYONE HELP ME?
Thanks in advance
I have set up my main data entry form as a navigation form with 5 tabs/pages. The first three all contain fields from my main data table, the other 2 tabs/pages have fields from related tables.
Ok, so my question is: is if there is a way to go from tab/page 1 through the other 4 in succession with the main primary key (in this case an object ID number) automatically populated through. As it is now, when I start a new record for an object on tab/page 1, and then go to the next tab/page, it registers a new record has been created (at the bottom of the form it updates the total amount of records entered), but I have to manually enter in the ID field at the top the object ID number that I am entering info for. Otherwise it is still showing the details associated with the last record I was in the form updating.
I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?