I need to take data from a form with many sub-forms. The letter has to be in word to allow for edits. Its an appointment letter, however is has a table with 1-100 lines.I need to be able to add the name, address, date of appointment and table with however many lines are needed for that client.I can get the table to work by itself or the name, address and date of appointment but not both.
View RepliesI have a form with several subforms within (tabbed subforms). I've used the code:
In the Current event of the parent form -
Code:
Me.AllowEdits = False
Me.AllowDeletions = False
Me.AllowAdditions = False
In the Current event of each of the subforms -
Code: (THIS NEVER WORKS FOR ME - RUNTIME ERROR)
Me.AllowEdits = Me.Parent.AllowEdits
Me.AllowDeletions = Me.Parent.AllowDeletions
Me.AllowAdditions = Me.Parent.AllowAdditions
In the Click event of the button -
Code:
Me.AllowEdits = True
Me.AllowDeletions = True
Me.AllowAdditions = True
So the main form is locked upon opening and unlocked with the click of an unlock button. How to apply this to the subforms as well. They just stayed unlocked the whole time.
I have several Suppliers, each of whom holds several SalesEvents. At each SalesEvent I might buy none, one or more Bundles. Each Bundle then contains one or more Items. These relationships are all reflected in my Access 2013 desktop db as one-many relationships with cascaded updates.
My form structure for data entry reflects the Relationships, in that I have a Supplier form with a SalesEvents subform. On that subform I can enter data about each of that Supplier's SalesEvents, and each SalesEvent row has a button to call up a SalesEvent form which has a Bundles subform. Then each row of that subform has a button which calls up a Bundle form containing an Items subform. That Bundle form identifies the Supplier, Sales Event and Bundle number, and within its Items subform I can then enter the data for each Item.
Problem : All used to work fine, but I've clearly changed something because now when I select the Items button on the Items subform in the Bundle form, the system gives me the data for the first record in the SalesEvents table, rather than the one selected. I have checked the raw data and that's as it should be. I have tried to undo all the steps I took since it last worked properly, but to no avail. Restoring the last backup (taken when I'm sure it worked properly) still has the problem.how do I find what data is actually being passed between forms and subforms ?
I have created a form with two subforms. The context of this is a litigation database. The main form is for testimony. Among other things, it includes a field for a question and an answer. Any given piece of testimony may relate to one or more documents, and any document may be referenced in one or more pieces of testimony. So have two subforms, one for documents produced by the Plaintiff, and one for documents produced by the Defendant. It worked out easier that way because I originally created indices of those documents in separate Excel tables which I then imported to Access.
So the relationship for both document tables relative to the testimony table is many to many, which is established using two junction tables.
I also have a combo box in each subform where I can autofill fields based on selection of the document number.
My problem is that while the combo-box works great, once I select a document in the subform, that selection is carried over into the next entry of the master form, but also the selection is not retained in any of the master forms. So I can browse the document listing from any entry in the master form, but I can't get the document selection in the subform to stick and create a lasting relationship to a given record in the master form.
Is my problem that it is just impossible to have a subform based on a many to many relationship, or is it in the parent child relationship of the form and subform, or is it in the properties of the subform?
Hi Guys,
The asset managment system I have been developing is due to go live next week and I am really struggling with the data entry and search forms.
I have attached a picture of the main form (and outlined each subform) to give you an idea of my project.
The attached form is actually a Main Equipment Type Detail form with a child subform AssetMain which has a number of child subforms i.e. Asset Details, Purchase Details etc.
When a user clicks to add a new asset a popup form asks them to select an equipment type i.e. PC. When they click it opens the attached form. Their selection filters the equipment type detail values in the combo i.e. Laptop, Tower, Server etc.
When a value is then selected in the combo you can then add an asset for that equipment type detail. (One Equip Type > Many Equip Type Detail > Many Assets)
1st Problem)
I have set the Asset Main subform to allow additions only. When the whole form opens, the Equipment Type combo (at the top) does not display a value but does actually contain the first value.
How do I force my user's to select a value in the combo before it actually filters the child subform?
2nd Problem) The Asset Main Subform (filtered by selected Equip Type) should only be used for data entry. I set the data entry property of the form to True but when the value in the Equip type combo changes, it displays all the relating records in the subform. My only solution so far is to stick
Subform.DataEntry = True
in the Equip Type combo's after update event. However, this doesnt look to good as it flashes up with the data and then displays a blank record.
Any ideas?
3rd problem) Due to the fact that I am using a number of subforms, my tab order is such that values are entered for the main form (i.e. ID, Condition) then subforms (i.e. manufacturer) then back to the main form (i.e. allocated to). This means that:
a) I am having problems validating the record beforeinsert as I have had to change the required property to "no"
b) Once the user has tabbed through all the forms what is the best way to go to a new record? Alternatively if I add a new record button I need to check that the necessary fields have been filled in (on all of the forms/subforms).
and finally the 4th)
I have a search form that queries the assets. The search results are displayed in a list box. When you dblclick the list box I need to show the asset details.
Question: Can I use the above form to do this? My only problem is that I need to open the AssetMain form which is a sub form in the above. If I try and use the existing form it will not open as many of the controls refer to the form as a subform. Do you think I need to create a separate form for showing the data to entering it?
Would really appreciate some help (not that you havent heard that before :) )
My head is going to pop in a minute!!!
Thanks
Ben
I need a form with 2 subforms. the main form is for an indidual. the first subform is a list of characteristics. the second subform is sort of a calendar function, produced for date scheduled, results, next meeting date.
I have tried the form wizard, but it produces a jumble of the mixed fields. Can I create a subform or 2 before I create the main form, and then link them somehow?
I want to create a form with two subforms. I create a form with one subform without problems but i would like to know how i can link the two subforms, so when i select a row in first subform display records in second subform.
View 1 Replies View Relatedis it possible to have 3 subforms in a form?if so how would i go about this i have created the form and the 3 subforms however it only allows me to link one into the form.
View 7 Replies View RelatedI forum could someone tell me:
I have an unbound form on that form I want to put three sub forms one on a products table the other on a course start dates table and the link table that joins the other two together. all three are related to each other with Pk/FK links.
When I try to link them it says you cannot link items on an unbound form.
regards in advance
Peter:eek:
I have a main form with a combo which lists all forms in my database. There is also a button which open all the forms depending on this which I will choose from my combo.
Private Sub Command2_Click()
DoCmd.OpenForm Me.cmbforms
End Sub
Is there any way to open the forms in a subform in my main form?
Let's say :
1 navigation form called Nav_Main
2 subforms :
1 called master_form ( PK = id_master) (table : master_table)
1 called details_form (with id_master in it) (tables : details_table)
the relationship is still established
I want to switch from master_form to details_form and retrieve only records corresponding to the last id_master where I was in master_form
(do I absolutely need to recreate a parameter query of details_table ?) What is (are) the simple way(s) to do it ?
I am trying to link two unrelated sub forms to a main form so I am able to query data all at once and make a report that displays all this data at once. I do not know if this is possible. I will tell you to the best of my ability about what I have going on.
My main form is a shift report. The primary key is a auto number ID. The rest of the fields are date, name, shift, vehicle. etc.
The first sub form is area attendance. Field are as follows auto number ID (primary key), report ID(which comes from the main form, linked), the area, and the area attendance.
The second sub form is the event log. Fields are as follows auto number ID (primary key), report ID(which comes from the main form, linked), time in, and events.
My relationship now is simply primary key from the shift report (the autonumber) going to the first and second subforms report ID's.
Problem is I can not query two distinct subforms like this (I realized).
Issue with Cursor moving on multi Subforms in a form.
I have 2 sub-forms in a main form as per screenshot. So Cursor moving from main form to 1st subform working well. After can't move the cursor from 1st subform to 2nd subform with tabbing or entering. Still there in 1st Subform in the last entered filed after tabbing or entering. I've checked on tab orders also they shown correct but it is can't move to 2nd subform.
I have a tabbed form. The main form is titles ContractDtlsFRM. There are 3 other subforms in separate tabs. The first field in the ContractDtlsFRM is Contract No. I would like the form to sort in ascending order by this number.
I tried entering the following code in the Forms Order By event but it didn't work
Private Sub Form_Open(Cancel As Integer)
Me.OrderByOn = True
Me.OrderBy = [Contract No]
End Sub
I have a complete working timeclock and trying to add the forms within the navigation form. I know I have to go back and re-reference everything and have already done so with the queries. But I cannot get the setfocus to work.
Here is the setup.
NavigationForm (navigation form)
frmClockIn (top form)
frmClockIn_SUB (bottom form)
Open Navigation > Time Clock.
Select an EmployeeID from the dropdown
Click on clock in. (successful)
cboEmployeID goes blank and try selecting the same employeeID to clock out and I get a debug at
Me.frmClockIn_SUB.SetFocus
I think there is a problem with my cboEmployeeID_AfterUpdate() as well.(related?) which used to be
Private Sub cboEmployeeID_AfterUpdate()
me.refresh
End Sub
I have replaced "me.refresh" with "Me.frmClockIn_SUB.Form.Refresh"
(It used to break here, but not after I changed it.)
Not too sure where to set these forms to in the code
I have attached a blank copy ....
I have created a database in microsoft access 2010 to show invoices for different customers in different countries. In doing so, I created using a two subforms in a main form. I have used the "country name" to link the subforms to the main form. When I enter new records into the subforms for a specific country, I realized that a duplicate record of an old record are being created in the subforms. What can I do to prevent this from happening? I tried to change the query link between the main form and subform to "invoice number" but the same problem has occurred.
I am novice to microsoft access 2010 ...
I have a main form with multpile tabs - each tab containing a different subform.
Link Master Field: ClientID (field in Master Form)
Link Child Field: Client ID (field in all subforms)
There is another field that all the subforms (continuous type) have: ObligorName. All the subforms are based off of a huge table (subtable) with fields: Obligor Name, Address, Zipcode, City, DOcuments Required, Bank Account Number, etc......
Essentially, the user will fill in the 10 obligor names associated to ONE client on the first subform on the first tab + address + zip code + city.
When the user clicks on the second tab to fill out the next subform, I want all 10 obligor names to be there already, so then they can fill out Documents Required + BAnk Account Number.
If I fill out the first subform and then exit out of the form and then reopen it, the other subforms autofill.
HOWEVER, I dont want to have the user have to do this. It wastes a lot of time. What can I do about this so that the table is automatically updated right away. They are all based on the same table so I do not see why there is so many issues.
I have a main form "frmDriverNoticeRecord" with 2 subforms, "frmSubDriverNotice" and "frmSubVehicleRecord"..The main form uses "IncidentID" as the PK. Each form stores data in its own table. The tables are related via IncidentID and there is a 1-many relationship between tblIncident (main) and tblDN (sub) and tblVehicle (sub).
I have a form "frmIncidentLog" displaying records in a table view with a few fields for quick reference and to allow selection of a single record for detailed viewing. I created a command button with the intent to open the "frmDriverNoticeRecord" at the current record. The main form and child link fields appear to be linked correctly; i.e. IncidentID on all three. If I open the form manually it opens and I can use it and search and filter as I want. If I try to open it via the command button It opens a small window asking for the IncidenID, when I enter theIncidentID number, it opens the form to the first record every time.Here is the code:
Private Sub comOpenDR_Click()
Dim frmName As String
Dim recID As String
frmName = "frmDriverNoticeRecord"
recID = "[IncidentID]=" & Me![IncidentID]
DoCmd.OpenForm frmName, , , recID
End Sub
I tried running the the DoCmd.OpenForm command directly from the button using the where condition (in various manners) with the same results.
I am attempting to create a patient tracking database for a clinic I work in and I am stuck at one small but major part.
I have a parent form called frm_Patient_index. On this form you can enter patient details such as personal details, observations ect. I need to create a lab request form for certain tests to be performed.
I want so that a button on the frm_patient_index form opens a subform where the relevent tests can be requested via tick boxes. Now here is my problem I have managed to create all of that except for the information to be entered into the frm_lab_request automatically and get SAVED to its corresponding table. It will not save for me.
I can get the information such as Badge Number, First Name, Surname and DOB to all enter into the fields automatically but getting them to save to the table is not happening.
Trying to get a total on main form from records from two subforms.
I'm coming up with Run-Time error 2450 Microsoft Access cannot find the referenced form 'tblitemlist subform'.
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
Hi there. I need a way to pass data between forms, and subforms. I have "form1" which simply contains a text box requiring the user to input an ID which I will call "PID". it also has a button which has the following code:
Private Sub Command5_Click()
On Error GoTo Err_Command5_Click
Dim stDocName As String
Dim stLinkCriteria As String
stLinkCriteria = "[PID]=" & Me.PID
stDocName = "TestExam"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_Command5_Click:
Exit Sub
Err_Command5_Click:
MsgBox Err.Description
Resume Exit_Command5_Click
End Sub
On the form testExam, I have a page control with 3 separate tabs. For each tab, I've embedded three separate subforms. All forms involved, including the container form (testExam) are bound to separate tables. All tables have one common field - PID
I'd like the user to only have to input the PID on one form, and have it trickle down to all subforms.
In the FOrm_Current sub of the testExam form, I have the following code:
Private Sub Form_Current()
[PID] = Forms!frmForm1.PID
End Sub
Using this code, I am able to pass the data from Form1 to testExam, have the PID on testExam filled in and on tab 2. But tab 1 will not populate automatically. I have no idea why. I don't know where to start troubleshooting this.
Please help.
Is this even a good way to pass data between subforms?
I have two subforms on a tabbed page. Both subforms read/write data from the same table. The first subform is in dataset view and consists of 5-6 fields on the line containing class information. The second subform consists of two memo-type fields where users can enter comments. The fields from both subforms should be written to the same record in the table. The problem is that
the information from the second subform is being written to a different table record; it is creating a new autonumber. The data is being written to two separate records instead of being combined into one.
How do I link the two subforms so that the data gets written to the same record in the table so that the class information and it's related comments stay together?
I have a form with two tabs... Its record source is Person and Account.
The main tab has a load of fields relating to the person and the other tab is meant to show the bank accounts that the person has in a subform. However if there is no bank account for the person then nothing will show in either the subform or on the person tab.
I have checked throughly to see if there is anything saying
SELECT Person.*, Account.* WHERE PersonName = etc
which would only get the account and person details if personname was there.
The form is accessed by means of a search form which opens the form like so.
DoCmd.openForm "PersonAccount", , , "[PersonName] = '" & personName.Value & "'"
So any ideas why nothing at all shows not even the Person details?
I'm new to form design and do not know any VBA (but that won't stop me from messing with the code when need be).
I'm creating a form that will serve as the user-interface for viewing, adding, and deleteing data.
The product I want is a form with 3 items: a subform that displays data in a table (so users can see all the data), a button that links to a second form for adding data, and a button that allows users to delete data.
I've gotten close to accomplishing this with the exception of the delete option. The hang-up is due to the fact that the subform that displays all the data is the output of a query (can't delete data through the query). A friend who used to work with Access years back was trying to solve this issue by writing code that would identify the primary key of the record selected in the subform/query and then adding code that would use this extracted primary key to delete the record in the original table.
This seems like a slightly convoluted approach. Any suggestions how I can get the product I'm looking for?
Thanks,
Phil
Picking up on some previous conversations with people, I have a form (Interconnect Register) within a database that I am trying to add a "cancel" button to which would close the form without saving. I can do this now, but the problem is there is a subform (Sheetsubfrom) within the main form. I have struggled to get the subform data to clear (was trying to use the DIRTY property but it wouldn't work - believe me, spent ages on it!) but have now got the following in place which I thought would work.
Private Sub Command41_Click()
Dim retval As Integer
'Check main form
On Error GoTo Sub_Form:
Forms![Interconnect Register].SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
Sub_Form:
On Error GoTo Error_Handle:
Forms![Interconnect Register]![SheetSubform].SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
DoCmd.Close
Error_Handle:
DoCmd.Close
End Sub
The problem has come full circle, in that when nothing has been changed ie nothing to cancel, an error occurs saying "nothing to undo". I believe this is something to do with having an error handling procedure nested within another error handling procedure, as from what I can make out from the help files Access backtracks to the level above. So when I have an error in the Sub_Form part, the whole thing crashes.
Any ideas guys and gals? I could try posting then DB on here if that would help, providing I can zip it up ok
Thanks
Ian