Forms :: Text Box Search To Populate Other Text Boxes?
May 10, 2015
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click()
DoCmd.FindRecord Me.BarTxt.Value, , True, , True
CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _
" WHERE Customer = """ & Nz(Me.BarTxt) & """" & _
" ORDER BY Customer"
End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
View Replies
ADVERTISEMENT
Nov 12, 2013
I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
View 2 Replies
View Related
Jun 26, 2014
I need to populate a text box with data from a single cell contained in a table.Im hoping to use two combo boxes that when selected will select the cell. The combo boxes select data sources from the same table. One combo the row the second the column. One combo is already in use and populates several fields in the form. In the same form I'd like to place the second combo and beneath it have a text box that will populate with that cell detail.
View 3 Replies
View Related
May 16, 2013
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO
Company
Address1
Address2
City
ZP
State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
View 1 Replies
View Related
Oct 16, 2013
I have a simple login form (really just an audit tracking form) that requires the person to enter in their email address and select an office number from a combo box. Essentially, upon first entry, they will put in their email address and select an office number. When they return to the database and put in their email, it will automatically populate the combo box.
I need the text box (EmailLogin) to do 3 things: update an EmailLogin field on a table called EmailLogin (which I already have it set to do), search a field called EMail in a table called Staff, and update a combo box (cboOfficeNumb) below it if it matches an entry from EMail on the Staff table with the field OfficeNumb.
I have the cboOfficeNumb updating the OfficeNumb field on both EmailLogin and Staff tables.I am unsure of how to use a Query to perform the search and use DLookup for the update of the cboOfficeNumb.I am okay with modifying the tables to remove OfficeNumb from the EmailLogin table, as it is really just tertiary.
View 14 Replies
View Related
May 22, 2015
I have a tabbed form from which the user can select a contact's record from a subform on the first tab, click a edit command button, and the unbound text boxes on the top of that tab populate. The user can then click the second tab with employment history which has blank unbound text boxes and another subform which is linked by the contact id to the first tab.
The user can select a record in the second tab, click a command button and the text boxes populate no problem. The problem comes when the user changes the contact on the first tab, and then tries to edit a record on the second tab. Then I get a run-time error '-2147352567 (80020009)' saying the value you entered isn't valid for this field. Why it would work the first time by not the second?
View 7 Replies
View Related
Aug 2, 2014
I have a form (employee info) that requires the user to do a search to find the employee before then editing anything that needs to be edited.
I have a search box that will find the relevant record without any problem, however what I am looking to do is hide text boxes on the form and have them appear only once the search has found the matching record.
If no matching record is found, I would then like a message box that states 'No matching employee, would you like to add an employee' and when the user clicks OK, it then reveals the same hidden text boxes and sets focus to the first one of the bunch.
Now, I have used the 'me.textboxname.visible = True (or False) elsewhere, however, I am not sure how to trigger that after a search.
I assume I am looking at an If statement, but I am not sure how to construct it, hence turning to the experts.
Code:
Private Sub txtEmployeeSearch_AfterUpdate()
If txtEmployee = DLookup("EmployeeNumber", "tblEmployeeInfo") Then
Me.txtboxname.Visible = True
Me.txtboxname2.Visible = True
DoCmd.GoToControl "txtboxname"
Else
MsgBox "Employee Not Found", vbYesNo
<<<<<<<<<<<<<<<<<<<<<<
End If
End Sub
I know that there is a massive gap where I have put <<<<<<<<<<<<<<<< - but I am stumped as to what to put in there?
View 3 Replies
View Related
Nov 7, 2014
I have a pair of captioned text boxes for taking the criteria for the search result. Currently the text boxes are tied with a date field. I would like to give the user's choice of a number of date fields. After some research, I believe option group control fits for this purpose. Unfortunately, I never try this function before.
View 1 Replies
View Related
Dec 8, 2014
i want to search a phone number in contact information table with column names - number, name, address, dob, gender, f-name, m-name etc and show them in a form with each field in separate text boxes in access 2010.
View 4 Replies
View Related
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
View 2 Replies
View Related
Mar 22, 2014
I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure]
Private Sub imagename_Click()
Me.imagename = Me.FileName
End Sub
View 4 Replies
View Related
Feb 17, 2006
hi,
I hope someone can help me here..
I have a form with ID, town and address on it.
I want to beable to type in an ID, press enter then if the ID exists in a query then populate the town and address text boxes with the correct info..
If the ID doesn't exist, then open another form so the user can choose the site from the list..
At the moment I think I am going about it the wrong way :
Private Sub ID_AfterUpdate()
intResult = DCount("*", "Q_findsite", "")
If intResult = 0 Then
Dim stDocName As String
stDocName = "Sites_listbox"
DoCmd.OpenForm stDocName, ,
End If
If intResult = 1 Then
Dim rst
--THIS PART FAILS WITH A RUNTIME 3061.. ?
Set rst = CurrentDb.openrecordset("Select town,address FROM Q_findsite ")
[Forms]![AddFault]![Town] = rst.Fields(0)
[Forms]![AddFault]![Address] = rst.Fields(1)
End If
End Sub
the Q_findsite query is expecting a parameter for ID = [forms]![addfault]![ID]
Is there an easier way of doing this ?
thanking you in advance.
View 6 Replies
View Related
Dec 18, 2014
I am in the process of (attempting) to develop a database and application for Parking & Violation Management. I have two tables at this point: "Parking Registration" and "Violations" that are linked by a "Permit #". I have developed a form that will allow the officer to enter either the "Permit" or the "Licence Plate" of a vehicle to run a "Vehicle Check" query to produce specific information for the vehicle in question; which is what I wanted, kind of... The problem is that the resulting data pops up in "table" format, and contains multiple fields, making review of the data difficult due to its lengthy, linear nature. Is there a way to have those results appear in text boxes either on a separate form or the "Vehicle Check" form itself?
View 1 Replies
View Related
Jul 23, 2013
I have two unbound text boxes and a search button adjacent each that allows me to search for a user via two methods:
1) Payroll ID
2) Surname
They have the following code:
txtPayrollIDSearch
Code:
Private Sub txtPayrollIDSearch_AfterUpdate()
Dim sWHERE As String
sWHERE = "[PayrollID] = " & Me.txtPayrollIDSearch
sWHERE = "[PayrollID] = '" & Me.txtPayrollIDSearch & "'"
[code]...
Then minor differences between the above and the Surname search.I have two questions:
1) How do I make the search more friendly by allowing it to find partial matches, i.e., a user has a surname of 'Smith' but I want to search for 'Smi'?
2) How can I display further error messages if there aren't any matches?
View 14 Replies
View Related
Aug 13, 2013
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
View 11 Replies
View Related
Jul 29, 2015
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies
View Related
Mar 14, 2014
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
View 4 Replies
View Related
Nov 8, 2004
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Thanks,
Lester
View 3 Replies
View Related
Jul 25, 2013
I am running in to a brick wall with this. I have an unbound text box with the control source set to =IIF([text42]=0,0,[text42]/[text44])*100 and in continues to return a #name? error.
I am not sure how to get this expression to work. I have even tried to put =[text42]/[text44] and I still get the #name? error.
View 3 Replies
View Related
Jun 4, 2013
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies
View Related
May 13, 2014
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
View 2 Replies
View Related
Jan 30, 2015
Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
View 2 Replies
View Related
Dec 10, 2014
I am newish to background coding in access 2010. I have a call log with a form which is where the information on the caller/area is entered. There's a combo box that needs to populate a textbox with 3 different things, depending on whats selected. I'm using If,Then, Else.
The first selection needs to just have the textbox say something. I have that figured out with:
If Me.CboSource = "..." Then
Me.Title = "..." (cboSource = combo, of course, and Title is the textbox.)
Next is where I'm fuzzy....The second selection needs to have the textbox populate with a dropdown list of choices from another table. No matter what I do, nothing is working. My latest attempt is:
ElseIf Me.CboSource = "External" Then
Me.Title = [tablename].[name]
View 10 Replies
View Related
May 10, 2014
I have a form with a combo box at the top that works fine. The combo box is linked to a table that has 5 parcels of land with area size, address, type. On my form i need to populate a textbox with a formula depending on what parcel of land was selected at the combo box. Such as price x area of land selected.
View 1 Replies
View Related
Sep 10, 2013
I have a Continuous Form with an Unbound TextBox, its Data property has
Quote:
=DLookUp("price","tblPrices","SupplierID = 1" And "ItemID = [itemID]")
The form Data is based on tblItems..I am getting one price for all the records. I expect to get the correct price for each item.
View 3 Replies
View Related
Mar 4, 2014
I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.
View 3 Replies
View Related