In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
View RepliesTrying to get a total on main form from records from two subforms.
I'm coming up with Run-Time error 2450 Microsoft Access cannot find the referenced form 'tblitemlist subform'.
I am trying to create a time sheet that enables my workers to fill out separate work orders and the hours from those Work orders are auto transferred to a sub form within their daily time sheet. I have gotten all this done and I have the total hours transferring to the main form but I need to use that transferred number in a new sum on the main form. I know that this cannot be easily done just by using the expression builder.
View 10 Replies View RelatedI believe I did this before awhile ago but for some reason I keep getting an error.
I have a Mainform (frmMain) that has a Subform (frmSub). On frmSub I have 2 comboxes (strCom1 & strCom2) one is set to invisible (strCom2.Visible = No).
So using the "On Open Event" of frmMain I want make strCom2 visible if strCom1 = "Read Only". Ofcourse I will also need to place the vba on the On After Update event. Below is what I have so far but doesnt work.
I get Run-time Error 2427 "You enetered an experssion that has no value"
Code:
Private Sub Form_Open(Cancel As Integer)
If Me!frmSub.Form!strCom1.Value = "Read Only" Then
Me!frmSub.Form!strCom2.Visible = True
Else
Me!frmSub.Form!strCom2.Visible = False
End If
End Sub
Hi ALl,
I have a subform that accounts and adds all the expenses for a certain project (for example, total is $27,000). I would like to know how to duplicate the final cost in the subform and show it on an unbound textbox of that linked main form (the unbound textbox in the main form shows $27,000 also).
Thanks in advance, guys...
Caliboi
I have a form with a subform in it. The Subform relates to a junction table.
For each record on the main form, there may be more than one record on the subform. The Subform only has one field on it (a combobox).
What I want to be able to do is have a text box on the main form that shows a concatenated list of all of the records on the subform.
For example, if I have 2 subform records, 'Yellow' and 'Blue', I want a textbox on the main form record to show 'Yellow, Blue'.
I have tried so many things I have found online (over about 5 hours, including a module called ConcatRelated) and absolutely nothing works!
I have a form with 22 subforms (in about 11 tabs). Each one of these subforms has a controlling field in the main form (table) that dictates if the associated subform needs to comply with data entry rules or not.
For example:
Field in main form cboMed (Yes; No)
Subform: frmSubMeds has a list of medications
I want to be able to loop through all the records of the subform and determine if they are complete.
This check is run from a command button; that should also consider the value in the combo box. i.e. Check only if the combo has a value of "Yes"
Since i have 22 subforms and have to run the check on everyone of them, i have used the tag property to check if the record is blank or not. This is what i have so far
Code:
For Each ctl In Me.Controls
Select Case ctl.Properties("ControlType")
Case acSubform ' only look for subforms
If ctl.Enabled Then
If Not (IsNull(ctl.Properties("SourceObject"))) Then 'if it is a subform type
[Code] ....
The problem with this is that it only looks for the selected record in the subform and doesnt look for ALL the records.
I have an existing Main form that has a sub form that the user uses to enter multiple records into a table....it works fine EXCEPT that I need to make it even easier and more intuitive and add a lot of labels. Basically the user selects items from a drop down list that adds items to a Work Order. I need to add some labels to the form to make it more descriptive for the user.
So, what I want to add multiple records using a single main form.
Is is possible to?:
1. simply turn the subform into a single main form? Can this be done by using a Command button or something similar?
2. copy all of the controls etc from the sub form into a new main form and have it all work nicely?
I have developed a database but have had difficulty with sorting data within subform of a main form. The subform displays the related tasks that correspond with main form that has been selected. Within the main form I have also created a text field that defines a particular sorting sequence of the tasks found within the subform which is titled Task Sequence. What I would like to do, is use the Task Sequence field to sort the order of tasks within subform. I have tried: IIf([ID] Is Null, 0, Val([Task Sequence])) within the Advanced filter/sort but either it shows only the first task defined in the Task Sequence or it wants to filter the main form and not the subform.
View 14 Replies View RelatedHow can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
I am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
I have a music database. It's somewhat over the top in terms of the information stored in it, but I like it. My issue is with getting the total number of tracks, as well as the total duration, for a given album (and for each disc, but if I can solve one that should also solve the other).
I have a lot of tables and forms, but for this problem I only need to deal with two of each. They are the tables for albums, the table for tracks, and their associated forms.
In my album table I have information such as album title, artist, release date, and album length. The tracks table contains information on each song - track title, track number, parent album, and track length.
My main form is for the album itself, and contains a subform for the tracks on said album. They correspond to the relevant tables.
What I want to do is obtain the value of the album length by calculating the sum of the track lengths for that album, and the number of tracks. Easy enough - Sum(TrackLength) and Count(TrackID) respectively, both of which can be stored in the footer of the subform.
My problem is that, rather than simply copying those values into text boxes on the main form, I want to copy them into actual fields in the album table. Furthermore, I want them to update as I add or edit the track lengths in the subform.
I have an entry form with a field(combo box) called cboGetCode. I also have a sub form (continuous form) with number of fields, also an entry form. Now, I have added a code behind the cboGetCode AfterUpdate event to populate the result to relevant fields in the main form.
PHP Code:
Me.lngSCode = DLookup("[lngSchoolCode]", "[qrReadingFirstSchools]", "[lngSchoolCode]='" & Me.cboGetCode & "'")
This is working very well.Now, what I would like to do is get code as shown in the cboGetCode field to my sub form lngSCode field.
How can I make certain my user enters records on a subform before attempting to save the main form? Right now they can completely ignore the subform before saving the record.The Main form has business address, etc. on it. the subform is bound to a join table that lists the multiple categories, subcategories and sector the business is listed in for a directory.
I already have my fields set to required at the table level in the join table, and have some existing VBA in both my subform (to update edited date) and my form (to validate empty records where a certain condition is met) but that's not the issue...
How do I focus the user to enter a record on the subform to the point where they are forced to enter something and complete the subform before the record is updated.
I have a subform embedded in a main form, the subform has a field (text box) that is doing automatic calculation so no manual entries are needed from the user. I have tried to pass automatically the final result to a text box in the main form, but all events are not working (afterupdate, On change, On Dirty), etc.
I have a button to do the above mentioned in the main form, but I don’t want to use that button, I want to do all the process from the subform.
Also, from the subform I was able to do click on the button on the main form (programmatically), however MS Access is too quick and the value extracted from the subform is always empty (zero); Acees is finishing before the calculation is done.
I am using MS Access 2010.
I'm using Access 2007. I have a few problems:
1. I have a switchboard. I want to click a button, that opens a form with a dropdown list, when I make my selection, it opens a subform in add mode, but the linked field in the subform isn't empty, but filled with the mainform's field value that I selected?
OR
2. Is there a way for me to open a form in add mode, add data to it, click the add button (I will add an add button) that allows me to add again, but this time a particular field is not empty, but filled with selected info from previous selection?
Say for instance, I have 2 fields (both combo box fields), I click add, made selections for both fields, I click add again, but this time one of the fields stays constant like it's already been selected. It's filled with what was selected from before.
Either of those 2 - which ever is simpler.
I have a Main form with a sub form.The main form is a customer record (form view), and the sub form is all other customers (same fields) datasheet view.I have a navigation bar to filter (using different queries) the results in the sub form
same postcode
Same company (different location)
everyone except Main form customer
I cannot get a different filter (Query) to show only customers whose name begins with the same letter as the customer in the main form?I have been trying Like but think I am referencing it wrong, as it prompts me to enter a value rather than using the value in the field in the main form.This is what I have in the query (of the subform)
Customer ID: <>[Forms]![NewAllCustomerListF]![CustomerID]
Customer Name: Like "[Forms]![NewAllCustomerListF]![CustomerName]" & "*"
I have a form with subform (datasheet) .
On my subform i have one field which shows the
productId ( which is filtered from combo boxes on main form) .
productId contains two columns
1 bound column(id) ( hidden with width 0 )
2 column (desription) ( shown with width 2 )
Now after entering the data when i come back to the form again . It hides the data from the productId field on subform , because data in combo box (on main form) doesn't match. Although the row is showing up , only the text in field (productId) is hidden.
Now when i change data in combo box on main form to match the ProductId , then the productId field text shows again. after changing combo box it hides . What i need is the existing data should not hide when i change the combo box selection.
see pic 1 where product matches and pic 2 where not. please note i am using master child relationship on the form/subform.
I have an access form (Customer) along with a sub-form (Work_done). On sub-form I have Running sum of Amount in Text box-1. I want that Total of Running sum be replaced with Main form's tables field total_amount. Is it possible that we can replace an amount of control of sub-form into main form's field?
View 1 Replies View RelatedI have a continuous subform. Because the records are often many, the user needs to scroll down the page.
How do I have a text box in each row that shows Record x of Total Records?
I tried setting a text box control source = [currentrecord] in the Detail area of the subform but it didn't work . It did weird things because I suspect the control is trying to show the record that has the focus or something
I am trying to get the main form to display a total Amount for all records in Purchase order details but the control displays Error:
I have a Form called frmPurchaseOrder with a sub-form sbfrmPurchaseOrderDetails
sbfrmPurchaseOrderDetails takes item details from a table based on what is selected in the combo box then fills out four additional fields in the same sub-form.
SELECT tblItemListDetails.ItemID, tblItemListDetails.ItemName, tblItemListDetails.ItemSize, tblItemListDetails.ItemUnit, tblItemListDetails.ItemUnitCost, tblItemListDetails.ItemBrand FROM tblItemListDetails WHERE (((tblItemListDetails.Supplier)=[Forms]![frmPurchaseOrders]![SupplierCombo]));
Private Sub cmbItemName_Change()
Me.txtSize.Value = Me.cmbItemName.Column(2)
[Code] ....
I am trying to count the number of records in a subform where the text box (txtFinal) = RPR-RPR & RTN. The subform is called PartNumbers. The table name the subform is bound to is named Completed.
I tried using =DCount("[Part Number]","Completed","[Final] = 'RPR-RPR & RTN'"). That is counting the total number of records in the table, not the total number of records in the subform. How do I get it to count the total number of records in the subform?
OK.... This is a DB I've been playing with a while... Got a few things fixed and working.... But of course more problems came up. This is a DB for tracking time spent on a project. This was all it was at first... Then I decided to add invoicing and got into trouble :) I have one main problem now and can't decide the best way to fix it.... Other then starting again and redesigning the DB.
I attached a copy... Easier to see the problem that way. From the main menu, click on "Open Client Billing"......From there, select a record on the subform and click "View Unbilled Time" From this form you will check a box to "Export" that time to create the invoice. And here is the problem. For example, if you click one out of two records to export it shows your record and creates the invoice. BUT... then if you close out and open it again to add the other record creating another invoice the previous record is ALSO in the new invoice!
So.... The records in the subform are not getting tied to the invoice number. Anyone want to make some suggestions on how the best way to correct my problem would be?
Thanks
I am having issues with my subform loading all records from the main table that its linked with. My main table has 8,849 records that fall Group 1 but only 8,831 records are showing up in my subform. I need to figure out how I can fix this. By a SQL code or VB code.
View 1 Replies View RelatedGo to frmInvoice, and you'll see a Net Total box (txtNetTotal) . It's control source is linked to a textbox in the subform fsubInvoiceDetails2 called txtStocktotal. It basically just pulls up all the costs associated with that InvoiceID.
The reference mechanism is as follows: =[fsubInvoiceDetails2].[Form]![txtStockTotal].Now...sometimes this works and sometimes it doesn't! Sometimes i've had to use: =forms!fsubInvoiceDetails2!txtStockTotal.
It seems to be very temperamental at times and i'm not fully confident if this can be explained.By way of note, I use express builder normally to input these statements: I go to Forms > ALL FORMS > fsubInvoiceDetails2 > txtstocktotal.
The recordsource is a query with over 6,000 records. The form currently lists the records in datasheet format with header and footer for things like buttons and filtering. The client wants to be able to go from page to page of the souce query, showing 100 records on the form at a time.
But at the same time, they should be able to filter or sort the data source in it's entirety. The person who created the form came up with what seems like an awful solution to the problem. It seems to use a random number generator to determine how many records to portray at a time. I see this in the code as well as in operation, because the number of records on page to page varies. It doesn't even start out at 100! Worse yet, using a sort on the page only sorts the records that are visible.