I have windows 7 and office 2003 installed.
I have access application which was running fine recently but for some reason everytime I run it now it gives an error on the adodb connection string saying compile error.
Its doing this on every adodb connection I have in my database.
I have tried registering the dao an ado dlls but still the problem persists.
I have a line of code in an old program:
Dim CN as ADODB Connection
This is giving me the error 'User defined type not defined'. I know I have to set something in a list somewhere but have forgotten how to do that. Where to go, and what to set?
I am trying to set up an unbound form inn access 2003 to link to a PostgreSQL database. Being a newbie to this sort of stuff, I am having a few problems. Using Access 2003 VBA Programmers Guide, I have found some code to help in what I am trying to do but I cannot get my head around the connection settings.
The code under the form General Declarations is:
Code:Dim rsTest As ADODB.RecordsetDim cnTest As ADODB.ConnectionDim boolAddNewMode As BooleanPrivate Sub pPopulateFields()' Check to be sure the recordset is not in a BOF or EOF state.' If it is then do nothingIf Not rsTest.BOF And Not rsTest.EOF Then' rsTest.Resync adAffectCurrentMe.job_number = rsTest.Fields("job_number")Me.customer_ref = rsTest.Fields("customer_ref")Me.pen_contract = rsTest.Fields("pen_contract")End If' Set focus to the Exit controlMe.cmdExit.SetFocus' Reset the text boxes and save/cancel buttons to a' locked or disabled state.Me.job_number.Locked = TrueMe.customer_ref.Locked = TrueMe.pen_contract.Locked = TrueMe.cmdCancel.Enabled = FalseMe.cmdSave.Enabled = False' Reset the boolAddNewMode flagboolAddNewMode = FalseEnd SubCode under on Open event of form:Private Sub Form_Open(Cancel As Integer)' For simplicity, we will use the built-in connection of the ADP.' If we were creating an MDB or connecting to a different SQL Server,' then the full connection string would need to be suppliedSet cnTest = Server.CreateObject("ADODB.Connection")cnTest.Open "FILEDSN=PostgreSQL"' Create the recordset and move to the first recordSet rsTest = New ADODB.RecordsetrsTest.Open "Digi Ticket", cnTest, adOpenDynamic, adLockOptimisticrsTest.MoveFirst' Populate the text boxes on the form with datapPopulateFieldsEnd Sub
I want to the form to pickup data using a filedsn called PostgreSQL from a table called 'public_digipen_tickets' and populate a form called Digi Ticket.
Can anyone offer any assistance.
thanks in advance.
I am getting the error " Unrecognized Database Format Error.
Sub ShowUserConnected()
Dim cn As New ADODB.Connection
Dim cn2 As New ADODB.Connection
Dim rs As New ADODB.Recordset
Dim i, j As Long
cn.Provider = "Microsoft.Jet.OLEDB.4.0"
[Code] ....
I have a routine which connects to MySQL database with ADODB connection. This worked in 2003 and 2007 runtime but throws a 430 error on 2010 runtime. It works in full access 2010. Has there been a change of policy to restrict this type of connection in the 2010 runtime? If I use a linked ODBC table instead of ADODB the runtime fails with "Runtime Error". It still works in full access.
View 2 Replies View RelatedI faced this error :
Run-time error '-2147467259(80004005)
The database has been placed in a state by user 'Admin' on machine "topleveldomain' that prevents it from being opened or locked.
in vba code :
I write such as :
con.Open "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:My ProjectBEdatabase1.accdb;"
I have used the ms access 2013.
I also have split this database such as instruction by people but nothing effect.
Hello,
I am new to asp so if anyone would be kind enough to help me i would appreciate it.
I am using macromedia dreamweaver to connect to an access database
This is the error i am getting
ADODB.Recordset error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another. /results.asp, line 47
this is my code
Code: <<A href="mailto:%@LANGUAGE="JAVASCRIPT">%@LANGUAGE="JAVASCRIPT" CODEPAGE="1252"%><!--#include file="Connections/IDX.asp" --><%var MLSIDX__twn = "everett";if (String(Request('twn')) != "undefined" && String(Request('twn')) != "") { MLSIDX__twn = String(Request('twn'));}%><%var MLSIDX__type = "sf";if (String(Request('type')) != "undefined" && String(Request('type')) != "") { MLSIDX__type = String(Request('type'));}%><%var MLSIDX__beds = "1";if (String(Request('beds')) != "undefined" && String(Request('beds')) != "") { MLSIDX__beds = String(Request('beds'));}%><%var MLSIDX__baths = "1";if (String(Request('baths')) != "undefined" && String(Request('baths')) != "") { MLSIDX__baths = String(Request('baths'));}%><%var MLSIDX__min = "0";if (String(Request('min')) != "undefined" && String(Request('min')) != "") { MLSIDX__min = String(Request('min'));}%><%var MLSIDX__max = "999999999";if (String(Request('max')) != "undefined" && String(Request('max')) != "") { MLSIDX__max = String(Request('max'));}%><%var MLSIDX = Server.CreateObject("ADODB.Recordset");MLSIDX.ActiveConnection = MM_IDX_STRING;MLSIDX.Source = "SELECT * FROM mls WHERE LONG ='"+ MLSIDX__twn.replace(/'/g, "''") + "' AND PROP_TYPE ='"+ MLSIDX__type.replace(/'/g, "''") + "' AND NO_BEDROOMS >= '"+ MLSIDX__beds.replace(/'/g, "''") + "' AND NO_FULL_BATHS >= '"+ MLSIDX__baths.replace(/'/g, "''") + "' AND LIST_PRICE BETWEEN '"+ MLSIDX__min.replace(/'/g, "''") + "' AND '"+ MLSIDX__max.replace(/'/g, "''") + "' ORDER BY LIST_PRICE";MLSIDX.CursorType = 0;MLSIDX.CursorLocation = 2;MLSIDX.LockType = 1;MLSIDX.Open();var MLSIDX_numRows = 0;%><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"><html><head><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"><title>Untitled Document</title></head><body><%=(MLSIDX.Fields.Item("LIST_PRICE").Value)%><%=(MLSIDX.Fields.Item("LIST_PRICE").Value)%><%=(MLSIDX.Fields.Item("LAST_NAME").Value)%></body></html><%MLSIDX.Close();%>
any suggestions as to what i am doing wrong?
Hey,
I am updating a switchboard from someone elses work.
I get the error on other peoples computers (but not my own) that there is an "error loading DLL" and the I get "The expression On Click you entered as the event property setting produced the following error: The expression you entered has a function name that <database> can't find.
* The expression maay not result in the name of a macro, the name of a user-defined function or [Event Procedure].
* There may have been an error evaulating the function, event, or macro"
I am including a before and after of the db as attached. (-new is the new one)
Again the form opens perfectly on my computer for both but not for anyone else. The error thrown is included as well as the jpg
HELP NEEDED AND APPRECIATED!
I try to open a web page with a form in access 2007. During the loading of the page it shows me 2 security error messages.
I tried to change the properties in Activex and especially the Silent property from No to Yes but this is not possible. In the next restart of the form restores the original settings.
When i open the same page with Internet Explorer it doesn't show any error. I have attached the database example to see exactly what happening.
I have designed a DB in access 2010 and it opens fine on my computer. However, when others I work with (who still have 2003) try to open the database, they get the following error: "An Error Has Occured Trying to Load The Form "Form Name" - Do You Wish to Continue".
When I click Yes, it brings up all of the VBA code in the background, but when i close all of that out, it still doensn't open.I am by no means an access expert.
I am developing a database for my company which will produce reports based on data entered on various forms.
When the report opens, I would like its name to dynamically change to include the site, the client and their reference number. Although I know very little VBA, from searching this and other forums I have managed to get this to work on other forms.
On a different form, I have managed this by giving the form the caption "Caption" and then running the following code on load:
Reports("ItemisedQuoteFromQuoteFromViewSalesEnquiryFromSearch").Caption = "Our Quotation Ref: " & [StaffInitials] & "/" & [QuoteEnteredBy] & "/" & [QuotesJobsSalesEnquiryRecordNumber] & " - " & [ClientDetailsName] & " reference " & [JobsClientJobNumber]
Which will give the report a title along the lines of: "Our Quotation Ref: AB/CD/123456 - Client Name reference 987654".
On the report I am struggling with the code is:
Reports("MWUPropertyAssessment").Caption = "Property Assessment for " & [SiteDetailsAddressLine1] & ", " & [ClientDetailsName] & " reference: " & [PropertyAssessmentClientJobNumber]
However all this produces is "Property Assessment for , reference". If I try entering just "[SiteDetailsAddressLine1]", "[ClientDetailsName]" or "[PropertyAssessmentClientJobNumber]" I receive an Invalid use of Null error message.
If I create text boxes on the report for [SiteDetailsAddressLine1], [ClientDetailsName] and [PropertyAssessmentClientJobNumber] they are filled with the correct information so I know that these fields are not blank.
Hi can anyone help me, im struggling to get my database connected to my site, it is connected to dreamweaver through ODBC but will not open, the problem i believe is in the lines of cole in bold. Any help would be much appreciated.
Dim adoCon, adoRec, adoRlt, dbname, adoConnectionString, dbRecordCount
dbname = Server.MapPath("Wortons_Notification_db.mdb")
adoConnectionString = "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" & dbname & ";DefaultDir=;"
Set adoCon = Server.CreateObject("ADODB.Connection")
Set adoRec = Server.CreateObject("ADODB.Recordset")
adoCon.Open adoConnectionString
adoRec.Open "Wortons_Notification_db", adoCon, adOpenStatic, adLockOptimistic, adCmdTable
This is the error type i get in my browser:
<LI>Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x814 Thread 0xa7c DBC 0x1191024 Jet'.
/Project_Wortons/Registration.asp, line 16
Thanks
I have a split database with multiple users. Since I split the database, it runs slower than the unsplit version. I understand this happens. I would like to have a message pop up when the database is loading. It takes approx 2 mins to load. Users get impatient and start clicking. So, I wanted to have a message pop up to let them know it is opening.
I have the same problem with forms loading, I have 5 forms and each takes about 4 secs to load, so thought about a loading message there too.
I have tried on different forms using more than a few different methods to make recordsets happen and to no avail. My current reason for needing to use recordsets is because I am loading a form with information from different tables. Instead of using multiple DLookups, opening the recordset only looks for the information once, speeding up the load time on the form.
Code:
Dim Rs As Dao.Recordset
Set Rs = CurrentDb.OpenRecordset("PreviousTRRetrieval2Query")
If Rs.RecordCount > 0 Then
ProjectNumber = Rs!ID
Agency = Rs!WitnessAgency
FileNumber = Rs!FileNumber
That is the start of my code and I keep getting an error, 3061 Too Few Parameters. Expected 1. Now when I run the query I get the results I desire, which is all the information I need at this particular junction. I am using Access 2010. Why I may not be returning any results for my recordset when the PreviousTRRetrival2Query returns results on its own.
Please help. My access prompt out this error when i used combo box wizard
Method 'Connection' of object ' _CurrentProject' Failed.
I couldn't use this VBA Command as well
"CurrentProject.Connection".
Does anybody know how to solve this. I've tried reinstalling ms access but the problem still occur.
I am forced to switch from a DSN connection to my database to a DSNless connection by my hosting company. I changed my connection string from this:
strConn = "dsnname"
set MyConn=Server.CreateObject("ADODB.Connection")
MyConn.Open strConn
to the following:
set MyConn=Server.CreateObject("ADODB.Connection")
MyConn.Open = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=d:pathtodatabasemydb.mdb;"
I connect fine. But when I run a certain query, I get the following error:
Microsoft JET Database Engine error '80040e14'
The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect.
The SQL statement in question here is:
SELECT MAX(week) AS LAST FROM Schedule WHERE Result <>''
If I change my connection back to the original DSN connection, everything is fine once again.
How would a different connection produce an error, and more importantly, how do I fix it?
Thanks,
Ted
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath(" coordinatordbTC.mdb")& ";PASSWORD=123456")
================================================== ===================================
I have been trying solve this problem for a few days.
however, the best i can come into is the above code, however , the following error still approached me.
================================================== ===================================
Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file is missing or opened exclusively by another user.
================================================== ====================================
Kindly , someone can help me in this coding . Thank you very much
hi guys,
this is my first thread on this forum...,, i am new out here..
i am not able to establish a connection with a MS Access database. I am using DSN Connection for it..
The error that i am getting is...//
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet database engine cannot open the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view its data.
/airtickets/scripts/dbconn.asp, line 4
please help...??
old Access database that's been upgraded through to Access 2000 or 2003 (probably 2000), but not beyond. Was rebuilt in Access 2003 format around 2006/2007 (by someone else who no longer works here). Being used now in Access 2007 and 2010. Uses DSN to connect to SQL Server backend. Last week it was SQL Server 2005, moved the back end on Saturday to SQL Server 2012. Changed the DSN when moving to the new server. But I don't think this has to do with the DSN (it's getting data just fine).
There's a data entry form. User enters a Generator ID, event triggers it to look for the details for the generator and load them into a generator subform. After it loads the information into the subform, and before the user does anything else, it throws "This connection cannot be used to perform this operation. It is either closed or invalid in this context."It triggers post update of the Generator ID:
Code:
Private Sub txtGeneratorID_AfterUpdate()
On Error GoTo Handle_err
Me.txtGeneratorID = UCase(Me.txtGeneratorID)
Call FillHandlerSubform(Me.subGeneratorInfo, Me.txtGeneratorID.Value)
If GetGenStat(Me.txtGeneratorID.Value) = "N" Or GetGenStat(Me.txtGeneratorID.Value) = "OB" Then
MsgBox "Warning Generator Status! " & UCase(Me.txtGeneratorID.Value) & vbCrLf & _
"This Generator has a status of N or OB!", vbCritical, "Bad Generator Status!"
Cancel = True
End If
[code]....
It doesn't throw this error in the development copy of the database, dev copy works just fine. It only throws it from the production version. They are located on the same network, just in different folders. They are pointing to the same database on the same SQL Server using a DSN file located inside the folder where the .mdb file is located (this is a change in the front end, prior to this it was using a DSN on each individual machine, but I changed it to stop that).
I think the damage to my database is not recoverable, but i'm still hoping.
My computer crashed when I was working on my dtabase and after restart the db is not working anymore :( If I try to do something, anything (!!!) all I got is an error message: "Error accessing file. Network connection may have been lost." But the db is on my computer, I don't use it over the network.
What can I do to make it working again?
Thanx!
Attila
I have split a few different MS Access databases before with the BE on a shared drive and the FE installed on all users' local machine. In this instance, I have three ODBC connections bringing in data to my tool from an outside database once a day. Is it faster to store the odbc connections on the FE or BE when I split them?
View 2 Replies View RelatedI have a question about connection strings. Basically I have an access front end and an access back end. It works fine for now, but when it gets rolled out, I don't want to have to manually relink the tables every time. Is it possible to hard-code the database connection strings for all the tables used in the solution as the paths won't change once deployed?
View 9 Replies View RelatedI have a back end 2002 DB. I would like to disallow access to this through odbc connection. Is there some way this can be achieved? Thie directory where it is located is unfortnately cannot be restricted as the front end mde also resides there.
View 1 Replies View RelatedI have a Access front end connected to a MS SQL database using a ODBC connection which is working fine of course.
When I compile it as a runtime version and install it on the business computer I get an error with the ODBC connection (I can't remember exactly what pops up). On the business computer I have installed SQL Native Client and in the ODBC added a System DSN (which works).
I have a split Access 2010 database. If the backend file is not accessible (for instance, if our shared folder connection is broken), I get no warning message at all when opening the front end. Just the home screen you would get when launching access from the Start menu. I was thinking of adding some VBA code to my startup form to give users a warning that there is a connection problem, but Access won't even load the startup form.
View 8 Replies View RelatedI am in need of consultation for MS Access reading data from ODBC connection. I have SQL Server that has all the data for the project financials etc.
I need a database that will read only certain data from the tables, for example, I don't need to import all 500,000 lines from SQL through ODBC connection, I just want to bring certain data for a list of projects whichever are opened and load only that data in MS Access so the group then can add additional details for that project in a shared MS Access.
Right now, all I can do is connect to that database through ODBC and brings all the data which I don't need all as it increases the size of the database, but just a criteria to specify which data to bring, if that's possible to do.