General :: Access 2013 / Error - Not Enough Memory To Update The Display
Dec 16, 2014
I am regularly getting the error "There is not enough free memory to update your display, close unneeded programs and try again"
Access 2013 on a windows 7 machine with 4 processors and 24GB total RAM.
Today I have 14 GB free memory (unbelievable! my first laptop had 136 MB total memory!) when I got this error (Access using 38MB) which makes me believe its not a system memory issue but to do with how much (or quickly) memory is allocated to Access.
View Replies
ADVERTISEMENT
Mar 13, 2010
My problem: There isn't enough free memory to update the display.
I looked all over the internet about this error but without any success.
Facts are:
1. I keep getting this error anytime I try to Print or Print Preview or export to PDF an Access Report (same error for printing Forms and maybe other objects).
2. I received this error when using Office 2007 with the same mdb and also after upgrading to Office 2010.
3. The same mdb on any other computer works perfectly. I can do Print, Print Preview or whatever I want. This seems to be related to this laptop I am using.
4. Resources are not a problem on this laptop: 3Gb RAM, Paging: 1Gb on sys drive C and 2Gb on D. The other machines have less.
View 9 Replies
View Related
Nov 14, 2014
In the database that I use at work sometimes when we OPEN it we get an immediate error saying out of memory, therefore we close it and reopen and all is good.
This is a problem when the average user logs on as they don't close it, they just continue on and then start experiencing issues.
I thought that the memory was supposed to clear when you close the database.
We run the debugger and no errors are ever found, we also run the compact and repair.
This can happen 1 in 10 or maybe 20 times when we open the database.
View 5 Replies
View Related
Dec 5, 2014
I am getting an error message when printing a 2 part report. It does not appear until I have already printed the first part and I am ready to print the second. I have 6 users and all seem to experience intermittently with the exception of 1 who it is constant. The message is as follows;
"There isn't enough memory to update the display. Close unneeded programs and try again."I have tried deleting the registry "KEY_ CURRENT_ USER SoftwareMicrosoftVBA" with no avail and have installed all available updates from MS.
View 3 Replies
View Related
Mar 10, 2005
Hi...can you help?
I have a multi-user MS Access97 database application. It is causing one of the users (and I have only once had the error message myself) the following error message:
"There isn't enough free memory to update the display. Close unneeded programs and try again."
This error message occurs when the user is doing data entry via the forms and navigating between forms in the database. The form, on which the error occurs becomes oversized and does not display all the information. The user is forced to shut down the database, re-open it, and then it works fine....but eventually the error re-occurs.
I found Microsoft's article 236977, but it applies to working with Forms in Access 2000. This problem is happening in Access 97, and none of the causes listed in the article apply.
Has anyone every come across this....and do you know of a solution?
Thanks,
BJS
View 1 Replies
View Related
Nov 6, 2013
My forms work well, but in form view are widely separated from the user tool bar. That is, the form is in the upper top left corner of the screen and the tool bar for choosing records is in the left hand corner at the bottom of the screen. I cannot get the tool bar in a position near the bottom of the form where it would be easier to work with.
View 9 Replies
View Related
Mar 3, 2013
I've developed and used over the past 20 years to handle my home finances. It includes several charts that were probably created back in Access 2003, which I used up until a couple of weeks ago when I subscribed to Office 365 Home and set up Office 2013, including Access.Most things worked without a hitch. In fact, all my old VBA code seems to run just fine.
However, the charts don't work. The right side of chart gets cut off way short of the margin both in print preview and report view. Everything else looks fine and the data is correct.
I've fiddled and fussed and fangled with zoom, clip and stretch. I've tried to resize the chart area - it just snaps back. I've tried everything I can think of based on 20 years of fussing with Access charts - which has always been a major pain - without success.
View 3 Replies
View Related
Apr 5, 2014
I have a program.mdb with a customized menu bar from Database Creations.When I open program.mdb in 2007 & 2010 the ribbon is disabled and the custom bar is displayed as it should be and all is OK.When I open the same program.mdb in 2013 the ribbon is displayed and the custom bar is missing
I have a clean compile and get no error messages.How do I disable the ribbon and get the custom EZ Menu Bar to display in 2013?.Following are the Options, Current Database, Ribbon and Tool Bar Option settings that is used in all Access 2007, 2010 & 2013 versions
Ribbon Name:
Menu Bar:EZ Menu Bar
Shortcut Menu Bar:(default)
CheckedAllow Full Menus
CheckedAllow Default Shortcut Menus
UncheckedAllow Built-in Toolbars
View 1 Replies
View Related
Nov 8, 2013
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies
View Related
Feb 7, 2014
I have an table with attachment field in which PDF files are attached.I need Access 2013 form to display PDF file content instead of PDF icon .While record changed should display PDF content for each record navigated
View 7 Replies
View Related
Sep 8, 2014
In the Access Table, how does one Find and Replace part of the hyperlink if the Text to display is different?
Example of Hyperlink Editor:
Example of Find and Replace
In other words, I'd like to find FAKESERVER and replace it with C:Users in all 1000 records. Is there any possible way to do this if there is Text to display?
View 4 Replies
View Related
Aug 16, 2012
What's wrong with my zSQL string? I am working on it for 2 days and got no where. I want to put a IF statement
(=IF('Report - key'!$B$7="ALL","ALL",'2012 data'!B2))
to a ACCESS Text field using SQL Update. Here is my code:
Dim zSQL As String
Dim zmsg As String
Dim DQ As String
DQ = """"
zSQL = "UPDATE Supplier_Meeting_Planning SET [ID3] = ' " & "=IF(" & "'" & "Report - key" & "'" & "!$B$7=" & DQ & "ALL" & DQ & "," & DQ & "ALL" & DQ & "," & "'" & "2012 data" & "'" & "!B2)"
Debug.Print zSQL
DoCmd.RunSQL zSQL
It is very painful to put ' and " in the string.
View 7 Replies
View Related
Jun 16, 2013
The following code works fine until it gets to last record, then it give me Error # 94 Invalid use of null. I have searched all of my code and null is not in the code.
Code:
'--------------------------------------------------------
' Goes to next record
'---------------------------------------------------------
Private Sub cmdNext_Click()
On Error GoTo err_handler
' DoCmd.GoToControl (txtNameL)
' DoCmd.GoToRecord , , acNext
[Code] .....
View 14 Replies
View Related
Oct 11, 2014
I use before insert code procedure to insert default value for one, or more fields in row. It is normal to have these fields are disabled. This event occurs when you try to enter a value in any another field in a row. However , when I finish entering the field going to the event before update regardless and trigger a validation of all fields in a row. I am not leaving from row , I want to go further input in other fields.How to insert default (calculated) values in new row.
View 2 Replies
View Related
May 20, 2013
I am pretty new to access and trying to create a form to enter data into a table. I keep getting a syntax error. Below is the part of code where I keep getting the syntax.
CurrentDb.Execute "INSERT INFO [Tb1 - Information]([Zone], [Controller], [Controller Type], [Panel], [CB #], [Controller Unit], [IP Address], [Modbus Address], [Sub Address/ HTC#], [PP Location], [Opp Priority],[ Startup Priority]) " & _
" VALUES('" & Me.Txtehtzone & "', '" & _
Me.Txtctrler & "','" & _
Me.TxtCB & "','" & _
[Code] ....
View 1 Replies
View Related
Jan 30, 2015
Access 2013 ... Is it possible to compact a database to a new name?
(In previous incarnations of Access I regularly 'compacted and repaired' databases to USB sticks rather than simply copy the file in the (mistaken??) belief that this was a more reliable approach)...
I can't see where to do this in Access 2013!
View 1 Replies
View Related
Nov 28, 2014
I made a new column in a table in access. The table is not linked and linking unfortunately is not an option. In the new column, I want to create a sum for 5 years of funding. There are multiple columns for a different fiscal year.
In excel, it is simply =sum(range), but I am drawing completely blank how to fill in the column with the sum data.
The end result is the data from 4 tables will be displayed in Forms and Reports.
Essentially what I need is an ability to bulk update a column in access table without a need to reupload the entire datasheet (over 100k rows with about 30 columns).
View 2 Replies
View Related
May 3, 2014
I'm getting error 2391 field 'f1' doesn't exist in destination table
Code:
Dim FileBrowse As Office.FileDialog
Dim varFile As Variant
Dim sFile As String
Set FileBrowse = Application.FileDialog(msoFileDialogFilePicker)
[Code] ....
View 1 Replies
View Related
Jan 2, 2014
I want to create a Web App in Access 2013 that contains a table of client names, addresses etc, and a second table that contains order details, including client name. It would be nice to ensure that as someone adds a new order they are give a drop down menu containing existing client names, and I can see how you can do this for a brand new table using the lookup data type. But I already have an Excel spread sheet containing client names. If I import this into my Access web app to create the client table, and import the existing orders to create the order table, I then try and change the data type of the client name (in the order table) from short text to lookup, it won't let me!! (If I create an empty client table from scratch, it lets me define the company name as a lookup data type - but I can't then import from Excel into this empty table)
View 14 Replies
View Related
Jul 18, 2013
how to disable the main close button so the user is forced to click the Quit Application button on my main switchboard?
View 8 Replies
View Related
Feb 2, 2014
I'm creating my first web app with Access 2013 and I'd like to allow users to run a query after supplying a parameter to be used in the query.Simple example might be to display a list of all records that contain a date older than "x" in a particular field - with the user supplying the value for "x" I understand that query parameters don't work with the web browser and that I need to use a macro to request the input of "x" and pass it to the query, but I can't find any examples of this kind or macro action (OpenDialog, I understand from Jeff's book).
View 3 Replies
View Related
Jun 3, 2013
Is it possible to play any kind of sound file from Access?
View 1 Replies
View Related
Feb 13, 2014
I've recently moved up to Access 2013 (from Access 2010) and everything went well, until one day my splash screen was blank and the program had empty fields...after seeing that all the links to the BE were OK, I re-booted and everything worked fine....until the next day the same thing happened...... The program randomly falls over about once or twice a week and I have to re-boot to cure it.....
My splash screen has a standard dlookup ( [=DLookUp("Banner","tblCompanyInfo")] ) to display the active company name...and sometimes its populated and other times its not..... if its not populated then loads of other fields on the forms are also blank - even if they point to valid data in the database!
I run Win7 (both 32 and 64bit) with Access 2013 32bit on three PC's - same problem on all!
View 3 Replies
View Related
Oct 10, 2013
Through a set of circumstances, I have had to quickly migrate a long-standing (and business critical) database from Access 2003 to Access 2013, without the sort of prepping and planning that I would normally do in such circumstances.
Most functionality appears to be working ok...
Many of my database objects, especially queries, were given meaningful descriptions.
For example, a number of queries might have been described as "Accounts Data Validation".
When I wanted to run validation of the Accounts data, I would simply sort the database queries window by description, then scroll to the relevant section and run all of the tagged queries in turn.
However, having migrated to Access 2013, although the descriptions are still shown, I can no longer sort by them !
Medium term, I could probably assign different database objects to "Groups", but we are talking hundreds, perhaps even thousands of different objects and that would be a laborious and extremely tedious process.
Any way of sorting the database window by description in Access 2013 ?
View 3 Replies
View Related
Apr 11, 2007
Im building a new database using Access 2003 SP2 on windows XP SP2 with 1 GB RAM.
When i try to execute the following line of VBA code I get an "out of memory" error:
Form_Confirmation.txtDept = cboDept.Text
Before this line of code I don't query any data or open any DAO connections, Im only checking the entered values in various text boxes and combo boxes on a form. I have also tried rebooting my computer and it still gets stuck at the same line.
What i basically want to do is just move data entered into text boxes on a shipping order form i created and present that data on another form to confirm the entered data. The error occurs when i try to move data from one form to another. The database is still only 1MB with only 5 tables, each with only a few records in them just for testing.
Do i need to install a service pack or download something to fix this error?
View 7 Replies
View Related
Oct 20, 2012
I'm having problems with my database. It was on a USB memory stick and suddenly I got a message to format the entire USB memory. I managed to retrieve the files on the USB and loaded them onto anothe USB, but when I tried to open the database I got the message:
"Cannot open database ". It may not be a database that your application recognizes, or the file may be corrupt."
However, when I tried it on another computer I managed to open the database but when I was closing it I got the same message again. The database is working OK, but how do I get rid of the message?
View 2 Replies
View Related
