General :: Access Query To Filter Out List Based On Multiple Row Criteria From Another Table
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org .gov .du .pk .dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
Below is what I have tried but in vain and it says atmost you can atmost one criteria row in sub query
SELECT tableA.WEB_ADDRESS FROM tableA WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.
I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.
Basically i want the criteria for one of the columns criteria to read
IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2
I have an AfterUpdate event where I want a list box to be populated based on three different criteria based on a table in my database
1. Complete = False AND 2. Supplier on form = supplier in table AND 3. Status in table = "SUPPLIER_RFQ FOLLOW-UP" OR "SUPPLIER_RE-RFQ TO OTHER SUPPLIER"
I am having trouble with the last OR statement criteria, i cannot get this to return values correctly. Here is my code:
I am currently working on a project to develop an access database to manage a roster of calls to clients on a daily basis based on two general criteria:
1. Pre-determined days selected by the client. (e.g. Call Mon, Wed, Fri only. This can change as client requirements change.)
2. Ad-hoc changes based on the client’s circumstances. (e.g. No call from 27/7/2015 to 29/7/ 2015)
I have managed to successfully deal with the second of these with the following expression in a query:
CallToday?: IIf((Date()>=[NoCallFrom] And Date()<=[NoCallTo]),"No","Yes")
However dealing with the first is a little more difficult to work out. I have tried a multivalue lookup field with multiple days selectable, but constructing an IIF query to deal with these multiple values is proving quite a challenge.
I am thinking of using a table with days of the week and a junction table to allow the multi-selection, but I may need constructing the relationships and the query here.
I've setup a selection form that returns a specific list of email addresses in a query.
What I can't work out is how to press a button and have the email addresses populate the To: field in a blank Outlook email - I don't need any bells or whistles.
Below is the SQL I have on a Union Query. Each Query is based on a date range. The first Query date is Planned Immplementation Date. The second Query date is Revised Planned Implementation Date. If the Date in the Revised Planned Implementation Date is higher than the EndDateTxt Date Range I do not want the results to appear for that ECN. Any suggestions on how to accomplish this?
SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process] FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID] WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes")) ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number] UNION SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process] FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID] WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Revised Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes")) ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number];
I have a parameter query where user enter the department number to get their info. I want instead of entering the department number, a list box pops up and ask to select department as parameter and run the same query.
I have a table(Product Change) with these fields: Tracking Number Approved (a check box) Engineering (text box that represents department) Purchasing (text box that represents department) Quality (text box that represents department) Production (text box that represents department) Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value. So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
I have a form that is showing data from 1 table. That table has 12 different fields on it and I want to be able to filter based on selections I make in a combo box in the header of the form. The filter string must be dynamic enough to allow filtering based on 1 criteria selected, or multiple criteria selected. For example:
If I have values in filter fields 3, 5, and 9 I'd want the filter string to be created as follows:
"...WHERE field3 = field3filter.value AND field5 = field5filter.value AND field9 = field9filter.value"
If I have values in only field 7, I'd want th efilter string to be created as follows:
"...WHERE field7 = field7filter.value"
And so on and so on.
I have created some filters before but all of the different VBA syntaxes I'm using seem to come up short.
I have a master data table containing 4 columns and ~ 500K rows. I have a list of keyterms from column1, column2 and column3. How do I use Access to search the masta data table and return the corresponding column4 value for each row on the list.
My form-based search mechanism uses controls to set the parameters for the query data source.
I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.
HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.
The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]
When i try and run this, i get the message "THe expression is too complex to be evaluated".
I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...
The question is:
How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...
I need to open my form with a filter attached that is based on criteria already existing in the subform. I've tried putting the following code in the OnOpen event of my main form : Code:Dim stDocName As StringDim stLinkCriteria As StringstDocName = "Campaign Form"stLinkCriteria = "[Campaign - Last Contact Status subform].Form![Communication Response] in ("2","4","10","11")"DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria, acFormPropertySettings, acWindowNormal
Basically I want to open my main form (Campaign Form) and only show records where the "Communication Response" is 2,4,10 or 11(a variable on my subform "Campaign - Last Contact Status subform"). Which in itself is a problem because I can't seem to code all of these variables- it will only accept one.
When I run the above code I am getting asked to enter a parameter value for "Campaign - Last Contact Status". I'm not too sure where this is picking this up from or how to fix it. I've even tried to run this based on the underlying query of "Campaign - Last Contact Status subform" with the same results.
Can someone help me? All I want to do is open the form based on the criteria I specify which is contained in a field in the subform. It doesn't sound that hard but it seems to be getting the better of me!
Hi, I've posted this same question a few months ago, started something else and forgotten about the problem, now I really need to solve this! (I had no luck with the original post - code still not working).
I want to apply a filter to my main form based on criteria showing on a subform. This is the code I've got (applied to the OnOpen event of the main form):
Code:Private Sub Form_Open(Cancel as Integer)Dim stDocName As StringDim stLinkCriteria As String stDocName = "Campaign Form"stLinkCriteria = "[Forms]![Campaign - Last Contact Status subform]![Communication Response]=1" DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria, acFormPropertySettings, acWindowNormalEnd Sub
The main form is called Campaign Form The subform is called Campaign - Last Contact Status subform The field I want to filter on is Communication Response
The criteria I want to filter is : I only want to show records from the Campaign Form (main form) where the status of the Communication Response on the Campaign - Last Contact Status subform (subform) is equal to 1.
I've tried a few variations of the above code but the results are always the same - prompting to enter a paramater value. Now I'm just fishing and hoping I'll get it right.
FYI. the subform only contains one record for each record on the main form. It works a bit like this : Customer||Date||Communication Response(1=open, 2=closed) One||20/4||1 Two||21/4||2 Three||21/4||1 One||23/4||2
The corresponding record on the subform for customer One will show the communication response of 2 as this is the most recent date. Therefore you now have the following : Customer||Communication Response One||2 Two||2 Three||1
Now I want to only show those records that have a Communication Response of 1. Remember this field appears on a subform. This is the part I am having trouble coding.
I know I've probably just explained the most irrelavent details but if anyone can help me it would be greatly appreciated!!
I have a table with the following columns: Task, Visa type, time it takes to perform the task. There are several taks that are performed for all visa types. I want to create a form to enter data to the table in which for the field visa type I have a list box that can allow multiple values, however, I do not to create a single line with the task and on visa type all the types of visas selected. I want to create a line for each type of visa with the information introduced.
I don't know if this is possible, the reason for which I want for the form to create several rows depending on the visas types is because then I have a query that sums all the types of visas. Can this be possible? I don't want the people to introduce manually directly to the table the data and also that for the same taks they have to enter manually 50 rows with values. I want it to be more simple and easier.
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine:
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long
I have a Master form which includes tabs within the tab I have subforms. I am looking for a way to filter my master form based on data found within my sub form.
I have a check box within one of the sub-forms called "softwareInstall" if yes the box would be checked. I want to filter all customers within my main form with a check box in my main form to turn on and show all customer who has this box check within the subform SoftwareInstall=True.
I have a database that is used to generate quotations. I have a form that I want to use to Re-Quote something. By Re-Quote, I mean I want the employee to be able to go in and search for the Part desired for Re-Quoting and create a new quotation with all of the information from that part and have the ability to change any of the information as needed. The Form is unbound, and has tab control with three tabs. I would like to search by three different categories "QuotationNumber", "Customer", Or "PartNumber". How do I have the combobox filter the list box below based on what is being typed in the combobox?
I have a table where the columns are team1, team2 and winner. Team1 and team2 are comboboxes that show all the teams in Team table. After I pick the team1 and team2 in a row I want to make a listbox that shows only those two teams as options for the winner.
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
I have a form bound to a table and I need to display and edit records. I want to narrow down the records by applying two filters; one combobox to select the ClientID and another to select the date. What I have so far is this:
Private Sub CboClientID_AfterUpdate() Me.Detail.Visible = True CboDate.RowSource = "Select AppointmentDate " & _ "FROM tblSample " & _ "WHERE ClientID = '" & CboClientID & "' " & _ "ORDER BY AppointmentDate" End Sub
then in the cboDate afterupdate event I have:
Private Sub CboDate_AfterUpdate() Me.Filter = "ClientID = '" & Me.CboClientID & "' AND [AppointmentDate] = #" & Me.CboDate & "#" Me.FilterOn = True End Sub
This appears to work with some records and not with others and I don't know why?
I have set up a query that will pull data from table1. There are two fields in my query to which I will filter by entering certain basic criteria. In the criteria line of my query field, I have entered "800" to only return this type of data. If I run the query, it returns only those fields, which is exactly what I want. However, I also need an additional filter in another field. I have entered "4", to return only those data matches.
So, my entire query is based on returning only the data from table1 that matches the two criteria ("800" and "4"). Problem is the query will not return any data when I enter the "4". Any ideas why this would happen? There does appear to be an extra space in table 1 for the field containing "4". I have tried to set the criteria to match, but it still does not return any values.
I have a temporary table with Yes/No fields (F101,F102,F103,....etc). In another table i have a field called ProductCode with values (101,102,103,....etc) Is it possible to append(or update) the records of the temp table with criteria on "F" &ProductCode field? (For example if ProductCode=101 then F101 sets to yes)
