General :: Adjust Cell Size According To Length Of Data In Datasheet
Jul 9, 2013I have subform (Datasheet) is there some code e.g. after update, which can adjust size cell to lenght of data?
View RepliesI have subform (Datasheet) is there some code e.g. after update, which can adjust size cell to lenght of data?
View RepliesI am creating an Electronic Medical Records database (well, a fake one, for medical simulation purposes). The way it works, you select a patient from a drop-down on the "Selection" form, and click a command button to bring you to a "Patient information" report. From that report you can view EKG's , Lab results or Imaging reports.This database is to be used for medical simulation for medical students. So for i have command buttons for each report, and a check box to "order tests".
When a test is ordered , i have the command buttons linked to go to a different report that appears the same except it has a subreport with the "new" test results in it. If this were an actual hospital , results would not be instantaneous, so i have the sleep api in for the "on load" for the reports with the "new" results.
I would like it so I could enter how long of a delay i want for the loading of a particular report in the dataentry form i have. But I am not the best at VBA, and I cannot seem to figure out how to get the sleep api to get the value for the number of seconds i want to wait from my table.
I have a report that prints labels (similar to avery labels) which pulls data from a query. These labels are all unique and vary in length. Due to the length variance, I want the font size to get smaller for labels with more characters. I want the text to go down to another line when necessary.
In my report under the OnPage Event Procedure I wrote this:
Private Sub Report_Page()
If Len(Text2) > 20 Then Text2.FontSize = 8
If Len(Text2) > 10 And Len(Text2) < 21 Then Text2.FontSize = 10
If Len(Text2) < 11 Then Text2.FontSize = 14
End Sub
This works to some degree but the problem is that once there is a longer label, all of the proceeding labels are resized & the longer label that should have been resized was not.
Is there another place I should be writing this code? I looked under events for the textbox but there doesn't seem to be anything that would work since none of them would trigger when printing labels
I have 2 gig of order data which has duplicates due to different invoice dates. How can I combine the dates into one cell so I only had one row of Order data.
i.e. order number, price, order date, invoice date
same order number, same price, same order date, different invoice date.
How do I combine the second line with the first so that I only have the data once.
I'm using conditional formatting on a datasheet to change the background colour of a cell. Is is possible to retrieve that colour?
View 6 Replies View RelatedIs there any way you can specify the size of a datasheet?
Say the datasheet opens up with 600x800 size?
or 10cm x 15cm?
The column in my list-box did not show all the text i save in the table field. is there any limited size for list-box's column to show the data ?
View 2 Replies View RelatedI have a datasheet on a form that is unable to show all records in the size allowed. Consequently it has a vertical scroll bar. However, the scroll bar allows scrolling to the bottom whereby there is white space almost the same size as the data records. The horizontal scroll bar does much the same.
Is it possible to just show the records and only the width of the data in them.? No extra records exist in the table to cause this.
Hi,
There is a requirement for
1)Populating a datasheet in a subform with a querystring which is dynamically built in VBA.This querystring is constructed based on the search criteria fields selected by the user in the main form.How can this be immplemented?
2_To click/double click a record in the datasheet,extract data and populate textfields,comboboxes with it which are in the main form.How is this achieved?Also,I can't find click events in a datasheet.
Pls let me know.
Thanks,
Savita
What's the best way of storing arrays of data within a cell? Or should I be creating fields to the size of the array.The size of the arrays are unknown at the moment.
View 7 Replies View RelatedI've always practiced to keep my backend table names to no more than 8 characters because of speed issues. Can this also goes for the server name? My current location looks like this now orld71-testing-aFinance..I am wondering if changing the server name with speed or is that only for folder names.
View 5 Replies View RelatedI have a table which holds the status of peoples orders. It holds information on order_id, order_status, order_desc, letter.
A letter is printed for each of the different statuses. However for one status i need two different letters to be printed.
How can i insert two values into the same cell.
So far i have done
insert into order_status (order_id,order_status,
order_desc, letter) values('025', 'Dispatched', 'Black tailored coat ','DPT notification');
This prints the DPT notification fine but i need another letter to print along with this.
My friend extracted some text from a PDF file, pasting it into Excel, and needs to find certain pieces of information. Problem is, the text came out as a long string instead of being broken into cells.
So, what we need to do is find, within the text, the 1st, 3rd, 5th, 7th, 9th, 11th and 13th times the word "Principal" appears, and then report back the name that follows. Within the text, it would read something like
(1234 Principal John Doe)
The number in front of it will change or be in a different format, there are other parentheses in the text (varying number of times within the text), and the name changes, of course. We want to extract the name following the word "Principal"... but only the odd-numbered times they appear. Some cells will have as few as six "Principal" entries, others as many as fourteen.
The Format Painter seems not to work in Access 2010.The Format Painter button is not in Home / Text Formatting, where you might expect to find it.I create a New Group and add the Format Painter icon. I cannot then use it. It stays greyed out.I add Format Painter to the Quick Access menu. It stays greyed out.If I view a form in Layout mode, I can sometimes get the Format Painter icon to highlight - but I cannot select just a single cell whose format I wish to copy.
Where use of the Format Painter is documented..How to do a very simple thing: copy a format from one cell in a subform to another.
I would likw for my first and last name fields width to match the length of the name. So if the last name is Smith then the field width will resize itself to fit perfect fit the name. Then if I have a last name of Connor then it will grow to fit it perfect. I dont need this but it will be nice so everything looks a bit nicer an cleaner. I thought the following would have worked:
Code : Me.Lastname.width = Len(Me.Lastname]
I currently have an access database for tracking company assets and performing maintenance tasks on them.We also have a number of Stores Stock Items that are controlled under a separate finance package.We currently have forms that create individually numbered "Job Cards" in the Job Cards Table..we input the data and manually type into a Text Box the we have used 'X' number of Store Stock 'Item Y'
I have then use a query to export the data i need (Job number, dates, location and Store Stock Items).But I have to manually re-construct the data and items into separate lines in an excel sheet for a paste operation into the finance package (lots of typing of 16 digit stock codes)
What i want is to use a second table (linked via the "Job Card#" key).It will be called "Stock Items" which has a separate field for each of our stock items.the user then just opens second form while creating the job that immediately creates a new record.The user then simply has to put the number of each item used in the relevant text box on the form and close.
example of datasheet view
Job# __ ItemX __ ItemY
2417_____3_______7
Now, I have all of that working as I want, But i nee to be able to combine the data from each field into a single field (either in access or excel).What I want to see is a field containing 3x ItemX, 7x ItemY, etc
if there are none of one or more items, I don't want anything displayed for that item (blank space is ok)I have 30 or more stock items, so there will be 30 or more columns in the table. the actual data stored in the table is simply the quantity of each item used.
this data is used twofold,on export to Excel I can split the data into new cells and it's used on a despatch note that is returned with the item so the end user can see the items that were used in the repair.So it needs to be done upon saving the record, record by record.
what would the T-SQL be for changing (altering) the data length of a field programmatically in a table in MS Access?
so if a field had a data length of 50, id like to change this to 60 programmatically. What would the code/syntax be?
I am trying to insert a new line below the active cell ive tried several attempts but i am getting error 1004. Some attempts are commented out.
Code:
wks6.Activate
With wks6
.Select
' .Rows.AutoFit
' .Columns.AutoFit
.Range("A:AO").Select
[Code] .....
I have a table period with three columns
ID, Period_Start_Year, Period_End_Year
I could have many periods in a future. What i want is to allow users to insert just first start year and lenght of period and table will be automatically updated based on these two values.
So user will insert Period_Start_Year and Length of Period, for example 2010 and 2 and table should be>
ID Period_Start_Year Period_End_Year
1 2010 2011
2 2012 2013
3 2014 2015
While i am writing this i realised that user have to specify also ending year, i do not want to have infinity.. I am thinking about form and update query but can't get it...
I have imported an Excel table with a column which has several values in one cell separated by "". In my case names of institutions afiliated with a patent. Example of the format of a single cell: MASSACHUSETTS INSTITUTE OF TECHNOLOGY (US) RIVE TECHNOLOGY INC (US)
In order to normalize the Access database I would like to extract the institutions to a separate table (institutions) and that the patent is related to both institutions.
I am using Access 2007.
Hi,
Is there any way that i could extract data from a single cell inside the table to the forms, and vice-versa?
I have a form that is based on a query that returns all the students taught by an indidual faculty member. There are two text boxes which I have added to the form bound to a table used in the query. However when I try to add data (attendance data) is doesn't accept it and simply "pings" each time I try.
View 3 Replies View RelatedI have entered one entry in to the database with the correct values (this is record 6) and everytime I enter a new record, the data is the same (I'm using a drop down list) it will automatically appear in the box. But when I goto the table that the data is stored in, each field just has the reference to the first record that the data came from.
Looks a bit like this:
ID Server Name Pattern Engine Program
6 LN1HOME 4.735.00 8.500-1002 5.58.0.1185
7 LN1WORK2 6 6 6
Is there a way of seeing the origonal data in those fields other than the Record ID Number as a reference. :confused:
I know its a lame question, Im just is a learning process at the moment.
thanks in advance.
I've got a database of club members with names, addresses, contact info etc.
I need to send letters by post to those members that I don't have email addresses for. How to create a query to return a list of people whom I don't have email addresses for.
I know how to mail merge the info with the letter I've written in word, how to group people who's email address cell is empty.
I have a database that I'm building off of a process that is currently done in excel. I want my percentages calculations to match what I get in excel but I'm finding the numbers to be off by as much as .4%. I'm pretty sure they issue has to do with the precision of its calculations but what the best settings are.
My percent numbers are currently set to the field size "Double" with a percent formatting. My currency numbers are set to the format Currency and decimal places on auto.
Watch the below tables.
I have a large ACCESS list as per the left one and I would like to make it as per right.
The problem is that I want to concatenate the "invoices" in one record separated with a coma , .
This is the only way I can compact the long list into a short one and make it comprehensible.
The invoices , in one cell, very rarely are more than 4 or 5 items.
So room for 6 is just perfect.