I have a form with many fields on it. For some reason some of the text in the form fields don't line up vertically with other text even though I have aligned them to the grid and to each other. I have Access 2013.
View RepliesI have created a form and want to turn the text in a header to a vertical read. I have tried all I know even pasting from excel and it just stays horisontal? Any help would be great.
View 2 Replies View RelatedHi All
I dont have room on my form to read a text box from left to right so can it be rotated? so i read the text from bottom up as you can do in word text boxes or excel cells?
regards in advance
I have a series of Unbound control boxes in one row. some text extend to two lines and I want everything to be centered both horizontally and vertically.
Can't figure out how to vertically align the contents of the controlb boxes...
I have a multicolumn listbox on my form. It works, but the second column is an amount, and I would like that column to be right-adjusted. Is there a way to do that?
Thanks,
David
I have a report that was created on my computer. When this report is opened on other computers (2 that I've tried) the text alignment is way off. Originally I thought it had to do with printer margins dictating something but that is not the case as the margins remain identical on all computers. It's not a font issue because it's Arial which all computers have. The text is written inside a "label".
View 5 Replies View RelatedWhile using list boxes i noticed that numeric fields were getting left aligned in the columns. Is there any way to get them right aligned ?
View 2 Replies View RelatedHow can change column color in list box and also how to make alignment left or right for cells data.
View 1 Replies View RelatedI'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
I am trying to use a check box to either grey out certain text field(s). For example If the box is checked true then certain fields would become available to input data. If the box is not checked it stays grayed out.
View 8 Replies View RelatedIn Excel I can do the following;
Field A Field B Result
Chips Fries Replacement of 'Chips' with 'Fries' on menu.
(null) Fries Addition of 'Fries' on menu.
Chips (null) Deletion of 'Chips' on menu.
Can I do this in Access using some form of append query?
I am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies View RelatedI'm trying to concatenate two text fields into a memo field using an expression in a select query. My problem is that the text fields together end up more than 255 characters, so I need the resulting field to be a memo instead. I can't change the underlying text fields to memo fields because this is a large database used by others who need those fields to be text.
View 3 Replies View RelatedMany times I have appended tables. But now I am struggling even trying to append 4 fields defined as text.
View attached zip file.
I have a few bit fields that, when checked, specific text need to be displayed in a field separated by commas.
Example:
Child 1 = checked
Child 2 = not checked
Child 3 = checked
Child 4 = not checked
Output:
Child 1, Child 3
I did find this sample expression that I am using in another area and it is working perfect and I understand it works based off of string length.
Mid(IIf(Len(Expr1), ", " & Expr1, "") & IIf(Len(Expr2), ", " & Expr2, "") & IIf(Len(Expr3), ", " & Expr3, ""),Len(", ") + 1)
What is the best way to accomplish this?
I am very new at Microsoft Access. I have two forms, A and B, that are filled out by two different users. Form A gets filled out first than form B gets filled out. Each has a name box as well as a birthdate box and a few other similar text fields. However, each form also has a few distinctive fields. I was wondering how I could input the common information in Form A to Form B so the user of Form B does not have to spend time retyping the name and birthdates again. In other words, I want to synchronize the similar records between the two forms. I would like the values to appear in a table as well. I would greatly appreciate it if someone could help me with the visual basic code. Thank You.
View 1 Replies View RelatedI currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
Hi
I new to VBA and having a few problems with a database I'm working on.
I have a form that contains customer details. The are two sections one for the Registered Office Address and one for the Trading Office Address. I want to be able to allow the user to auto fill the Trading Office Address fields if the Trading Office is the same as the Registered Office.
I'm not sure how the event code should look. I was just going to add a button that will copy the text from the Registered Office Address fields and add them to the Trading Office Address fields. I've tried a couple of other groups but the replies just contain use this code....
TOName = ROName
TOAddress = ROAddress
etc... for all your fields.
I need a little bit more info on how the event code should look.
Any suggestions on the best code to use would be greatly appreciated.
Kind Regards
David
G'Day again everyone,
I would like to justify everything so it is in the centre of the cell in the datasheet. Can this be done?
Also is there any way that you can wrap text in a text box?
Thanks a lot - Elliot
:confused:
I have tried everything I can think of-
I have a tabular form in Access 2003 that is cutting off the text disply in some text fields.
I am doing some comparisons so the fields are repeated three times.
All three fields are larger than the data.
Two fields display correctly and the third field, identical to the other two, is chopped off on the right side and just shows empty space after the first few letters instead of all the data.
Fields are all the same size in the underlying table.
Changing the format between left, center, right has no effect.
Text size is the same in all three.
All the data is from a single query on a single form.
There is no subform.
All properties for the three are the same.
If I increase the field WAY beyond the required size all the data shows, but I haven't any extra room to do this on the form.
Any ideas would be much appreciated :)
is there a way to have a form set to either auto populate fields based on the FIRST FIELD? For example: if the user type in the STUDY ID, the other fields like (first name, last name etc..) are auto-populated/auto-filled? and if the STUDY ID is new and not in the table, then the users simply fill in all the fields/complete the form and save? And I would also like a message box to show when I am typing the STUDY ID that would say something like: this person is on the system already. Click YES for this person and NO to add the user?...
View 2 Replies View Relatedis there any way you can align text and data within msgbox's, with vbtab etc.
i suppose its a matter of forcing several text strings to occupy a similar length of screen real estate.
can you achieve this in a msgbox?
Please bare with me as I am an Absolute Access VB code novice . I have a Form in my Access DB and I found the Following code on this site and placed it behind my search button :
Private Sub SearchButton_Click()
DoCmd.OpenReport "All users", acViewPreview, , "[AUP].[First Name] = '" & Me.[Text34] & "'"
End Sub
The Search works great but only searches on the 1 Field "First Name" . How would I expand the VB code to include another 2 fields within my table . ( the other 2 fields I want to serach appear on the Form ) .
I want a help on this complicated issue:
On running a select query with "a*" of names in a table:
Results are : America, Argentina
Now I want this to dynamically create 2 text fileds in a form and fill America &".snp" in first and Argentina &".snp" in 2nd filed.
It is not regarding subform to display data of query result.
This I am going to use to add attchment for outlook email session as being discussed in my Email from access with attachment thread.
i have code to open up an email from a form, what i would like is certain field values of the form to appear in the email
View 5 Replies View RelatedThe items in my database:
Form - Customer_Data
Form - ConsignmentGuide
Query - Customer_Data Query
Text Field - GBL
Text Field - Text89
Text89 is using an Expr from query
Expr6: Left([GBL],4)
What happens is Expr6 will take the first 4 Letters of GBL. I want to double click GBL an bring up the ConsignmentGuide based on Text89.
Code:
DoCmd.OpenForm "ConsignmentGuide", , , "Text89='" & Me.Expr6 & "'"
My problem is when I do this I get a pop up asking for a Parameter Value. but there is text in Text89. How to I get a round the Parameter Value box coming up an automatically do this. If I type the first four letters in to the Parameter Value it finds it on Consignment Guide.