I am looking to (on the mainform) have the user enter into a text box whatever date they would like to enter and have that value become the current date of the system. So that all operations are based off of this newly entered date.
View RepliesHi All,
I have a form from with a button that exports data in to excel using the following on click code
DoCmd.OutputTo acOutputQuery, "qrySoftPDR2", acFormatXLS, "FOBPDR.xls", True 'open in Excel
The problem is that if I go in to an existing record it works fine.
However if I have just input the record then it comes out blank. I'm guessing there is some sort of record update code I can use, but I've been unable to figure oput what it may be,
Thanks again
I have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View 4 Replies View RelatedI have an access database where I have added a new field, but I cannot find the name of that field in the Control Source list to link it from where the data will be entered. It IS in the table, too. Why in the world is it not working.
A user enters a New Job Opening into the form for New Job Opening. Later, a user enters a New Interview in the New Interview form.... when they enter the job opening number into the job opening number field, it auto-populates the other information previously entered into the New Job Opening form into an area within the New Interview form. I have made sure the new field is in the table for the New Job Openings table.
My friend is looking for the database to auto populate a date, based on information already entered.
A Learner Starts his/her private tuition lessons on dd/mm/yyyy and pays for 6 weeks, the next lot of payments is due on dd/mm/yyyy...
Hello everyone,
I need help in writing a query that would return the records that are not older than two weeks.
I would appreciate your help in advance. :o
I have an append query that appends records to a table, and I have a form based on that table.
Users will click a button that will run the append query and then open a form for users to fill in remaining empty cells. How can I filter the form to show only the newly appended records?
I need to create a New Form control for this situation:
If I enter a date into a field and the choice for another field is equal to a certain value. How can I get the date I entered to be automatically populated into another date field.
For example:
If I enter 11/10/2005 in a date field and I choose either "BN", "BA", or "BT" in a text field, I need that date of 11/10/2005 to be automatically populated in another date field on the same form.
Any help is greatly appreciated.
Is it possible to have the Date/Time appear as part of the name of a table? I don't want to create and rename a table I want to run a Query that will create a Table that will have the name + date or just the date.
Example
"Todays file 20070308 11:10:34 AM"
or
"2007080308"
Or
"2007080308 11:10:34"
I have attached a sample of a database.
Table 1 has all the items I am trying to sell with sell by date after which I cannot sell this item. Then in Table 2 I have forecasted sales. So now I am trying to calculate stock consumption to see if I will be left with any stock that I cannot sell.
So now somehow I need to deduct sales forecast from my stock holding but it needs to go by date i.e. consume all stock for Item 1 with date 16/09 before moving to Item 1 with sale by date 23/09.
So based on the attached example, I can see that on 16/09 I will consume only 5 cases from sell by date 16/09 and another sale is 18/09. So that would give me information that I will be left with 95 items dated 16/09, which I cannot sell because they will be out of date.
Ideally I would like also to include the logic that if Item is out of date it would move to the next sell by date.
So in this case sale of Item 1 forecasted for 18/09 (94) would consume the whole stock (50) with date 23/09 and another 44 from date 01/10
For Item 2 I can see that units with Sell by date 30/09 will be consumed on 25/09 and I will start taking stock from next sell by date which is 14/10.
I have 2 tables like this
TableA
FromDate
ToDate
BatchType
TotalBatches
TableB
Date
BatchType
NumBatches
Is their a way to update the TotalBatches in TableA with the sum of NumBatches from tableB that have the same BatchType and falls between the FromDate and ToDate of TableA?
Using Access and Outlook 2010. I have a database that tracks Contracts for our University. One of the fields it tracks is Expiration Date.
Is there a way to have Access prompt Outlook to send an email to my boss when the contract is a month or within a month from expiring?I'm assuming when the database is opened it would have to run a query for expiration dates expiring within one month of today's date (which i know how to do).
I just don't know if it's possible to generate an email or some kind of message with those records/contract numbers displayed? I should also note my boss is the only one who uses this database so even if the email notice isn't possible, is there a way to show a message of what contracts are expiring soon when he opens the DB?
I want to make an application that reminder Radio Broadcaster to read ads based on airing hour.
I have a question , how to make reminder pop up based on selected hour or time and date of that advertisement.
I am looking to have entries made to the table based on a date range. I have a database of events and most repeat daily, weekly, etc. When I enter them into Access, they go in as a single entry with a start and end date. But I need to have them as individual entries for each day so that rather than one entry of 5 days, I need to create 5 entries of one day each.
View 5 Replies View RelatedHi all,
Please bear with me if I'm asking a dumb question. I've been tasked to create a database from scratch and I've not had much experience working with Access.
**My Question**
Using a form is it possible to have the form automatically enter a "value" in one field based on the information inputed by someone in a different field.
ie. When some one puts in a value between 0 and 20 in one field it automatically enters a 1 in the other, and when some one puts in a value between 21 and 30 you get a 2 and so on down the line.
Thanks for the help.
Cheers
I have a form where I am capturing StartTime and EndTime of certain events. I have set the input mask as 99:00 >LL;0;_
My users think it is too much to enter am or pm. What they want is the system to calculate the am pm based on the time entered.
If the time entered is between 8:00 to 11:59, the system should save it as 11:59 am and if the time entered is between 12:00 to 7.00, the system should save it as 7.00 pm.
How can I make this happen.
I have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
I'm attempting to build a simple database for a martial arts tournament registration. The weight division (Fin, Fly, Heavy, etc.) depends on the age, the sex and the weight. I've tried this several different ways, most recently by using one table called "competitors" with all the entrant's information, and several other tables based on the age class/sex (i.e. I have a table called Age 8-9 Male with the weights and divisions in it, and other tables for the other ages/sex).
So, basically, what I'd like to have happen is a report that will lookup in the correct table the division, based on the weight entered. In other words, for a record where the age is 8-9 and the sex is Male, the report compares the weight to the values in the 8-9 Male table, or if the record is a 12-13 Female, it looks in the 12-13 Female table for the weight, and places the correct division in the Division field of the report.
Probably going about this wrong.....but any help would be appreciated.
I am trying to color code text boxes based on the data entered in. The column is "PHASE" and the items entered in are either "1" "2" or "3". 1 is supposed to be Red, 2 Yellow, 3 Green.
I have Microsoft Access XP (I'm sure). I've tried to do it on VB and had no luck. I couldn't figure out Macro and I don't have On Click or Code Builder.
I have tried a couple of different expressions and no luck. I'm definitely an amateur to Access. I'm only using it cause it's what we have in the office.
I have two text boxes for which I am trying have show and error message when the proper data is not entered. One text box is for PLANID and the other is for Date. I would like the PLANID to be checked 1st. The PLANID needs to be either 7 digits or 10. If it is not, the message would be "Please enter a valid PLANID". If it is 7 or 10 digits, then it should check the Date text box.
If it is blank, the message would be "Please enter a valid Date". If they are both blank, the PLANID message should appear 1st. Below is what I have written. The problem that I am having is that when the PLANID is 10 digits and the date is blank, the "Please enter a valid PLANID" message is showing rather than the "Please enter a valid Date" message.
Private Sub Btn_Refresh_Data_for_One_Plan_Click()
Me.txtboxPLANID.Value = UCase(Me.txtboxPLANID.Value)
If ((Len(Me.txtboxPLANID.Value) = 7 And Len(Me.txtboxPLANID.Value) = 10) And (Not IsNull(Me.txtboxPLANID.Value)) And (Not IsNull(Me.TxtboxDate.Value))) Then
Dim stDocName As String
stDocName = "Mcr_RUN_MATCH_DIFFERENCES"
[code]....
Microsoft Access 2003
Novice and working on a project with deadline... please help.
I have a table w a field that I want to convert into a combo bo and use data in the field as the options:
FIELD: Student Status
OPTIONS:
Enrolled
Suspended
Withdrawn
How do I get the combo box to automatically pull the values from that field into the options in the field when u pull down the drop down box?
Am I being clear?
I need to assign those appraisers to an order based on what county they cover. My main table (orders) is simple. Just an order number, order date, county and appraiser.I have a form with entry fields for all these except appraiser. I envision a "assign" button that will then pick the next appraiser in the county that was chosen. It's just a "round robin" type of thing, so the first order placed for Monroe would be assigned to ABC. The next order would be for Cecil and would assign 123. Next order for Monroe would assign DEF. I know there are many way this can be done but I've been looking at this for hours and I'm drawing a blank on the easiest way to do it.
View 5 Replies View RelatedHello
I'm currently doing a query, when a report is received, we enter a date, i would like a query which would show records where the received date has not been entered. i have tried putting in isnull() but does not work.
Can anyone help?
Thanks
Hi all,I'm working on a library database for a small collection.I have two fields, 'Date Out' and 'Date IN'. Is it possible that whatever date is written for the date taken out, I can set the 'Date IN' to be 7 days later than that date?Thanks in advance.
View 4 Replies View RelatedHow to disable fields in Access based on data entered in a previous field? For example if "yes" is chosen from a drop down show "Date field" if "no" is chose hide "Date Field".
View 2 Replies View RelatedI have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.
View 3 Replies View Related