General :: Auto Populate A Text Box Based On Selection Of Combo Box
Jul 24, 2014
I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.
I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?
=[Combo2].[Column](1)
=[Combo2].[Column](2)
One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code: Private Sub cboCombo31_Change() Me.txtPart_Name.Value = Me.cboMold_No.Column(3) Me.txtPart_No.Value = Me.cboMold_No.Column(4) End Sub
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
I have a Table (tblFPAData) that is being populated with entries from a form I created. There are several fields but if I can get an answer for one relationship then I can repeat it for the others.
In tblFPAData there are the fields MaterialNo and Description.
I am creating another table called tblSchedule and using a form to enter the information. I need the user to select the MaterialNo from a combo (cmbMaterialNo) and the then table auto populates the Description from tblFPAData.
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO Company Address1 Address2 City ZP State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do: 1. I want users to be able to select a category in combo box #1 (example: "Bag") 2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool") 3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
I have a form that has a combo box in the header. I want to be able to select an employee name and the remaining info in the detail section of the form populate. My other fields are:
Employee Name - text box Reporting Unit - combo box Department - combox box Primary Phone - text box Secondary Phone - text box Emergency Contact Name - text box Relationship - text box Emergency Contact Primary Phone - text box Emergency Contact Secondary Phone - text box B-Alert Txt - combo box B-Alrt Phone - combo box e-mail - text box
I have a training log that has 4 tables, the employee table, the training course table, and the department table.
These tables all contain the names of employees, training courses, and department in one field and their respective ID codes in the other.
The 4th table is the actual log where the manager logs in who took the training courses. When the manager goes to select the employee name, course name, and department name is there a way not using VBA for the respective ID number to appear in the 4th table (they use the same field names and are related)
I have an unbound combobox on a form that is used to filter the records of a subform based on who they have been assigned to. The combo box is based off of a query to the personnel table and utilizes a UNION querry to add the option "**ALL**" with a id number "111111" as the first option in the combo box.
In other words: the combo box has a list of names to choose from and the word "ALL" at the top as the first selection. The idea is that when "**ALL**" is selected, the subform should display all records regardless of who they have been assigned to. I'm trying to accomplish this with VBA. I've started developing the code to try to impliment this, however currently when "**ALL**" is selected, I'm getting a datatype missmatch that seems to be caused by my use of recordset.
I want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
I have 5 combo boxes that all cascade into the next, and then when the last combo box is updated from the drop down list, it auto-populates a text box. My issue is that I have a second text box that needs to be auto-populated from the same data table based on what has been entered into the 5 combo boxes and the first text box. I've tried creating parameters and setting a lookuprecord macro in my main table and then using a returnvars RunDataMacro on the actual form, but it says, "Invalid list or query reference 'BillingDataQuery'." I'm not sure if it's because I'm not setting that RunDataMacro on the wrong combo box, or if I've written it incorrectly...
I did this same technique (based on directions in a post from this forum) on another combo box that populates five text boxes and it works just fine, but I don't know how to get this to work based on what's populated in 5 combo boxes to auto-populate the last text box.
I'm pretty new to this type of programming and i was hoping for a little help,
I have completed the majority of my program it's just a few little things i need to tweak.
The main thing is that i am trying to get a text box to autofill from a selection in a combo box i.e.
i have selected a drop down box with 3 coloums looked up from another table i would like 1 of the columns to stay in the combo box after selection and the other two to appear in the text boxes on the same page.
I am trying to auto populate the text boxes in the form based on drop down from the combo box. As you can see in the form Frm_Input, this works fine for FL, but for some reason it will not populate for Skill, Role, FLM and Location. The table it is linking to is Tbl_Names. Why as I have changed the column source?
if it is possible whereby if a user makes a selection in combobox 1 it must automatically generate the given vaules in combobox2 from the selection in combobox 1.
I am trying to populate the text boxes in a form with data from a table based on the selection a user has made in a combobox. I am trying to do this through a DLOOKUP in the text boxes Control Source using the following:
I have a select query that holds anywhere between 1 to a couple hundred records, I need to take the Name field and populate a textbox which after verification I write to a text file that I later use in a powershell script. So far have tried using VBA to create a variable and populate the textbox based on the string but it only provides me the first item, I've tried dmax and this gives me a single result last Item, Dlookup only gives me the first item, changed it to a listbox which populates the box correctly but only writes the selected item in to my text file.
On paper I have designed a faculty contact database and have now come to the point where I am designing the form. In the contact information table are Cell, Home, Office fields as well as Personal, Work, Alternate email fields which will contain the corresponding information. On the form after the information is entered the person needs to select an option from each of four combo boxes to indicate which is the preferred number, number for student, preferred email and email for students. The question is how to populate the text fields in a report based on the selection of the combo boxes with the information stored in the corresponding field (cell, home, office phone numbers and personal, work and alternate email). I am assuming it is done in the query but I don't know how or can it be done in vba?
In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
I am new to access and have been staring at the same Run-time error for 3 days (pathetic I know). I cannot for the life of me figure out why it does not like my Dlookup. Esentially, I want and After Update event in my combo box to populate a Rich text textbox in my form. After reading DLookup is the easiest way to make this happen. Here is my code:
I have 2 questions which are linked. I am trying to run a query based on a selection from a combo box. Would someone be so kind to indicte if i need to use VB or can i do it directly from Access?
I have made the query and the combo box table but i am unable to get the combo box selection to be used in the query.
Additionally i want the query to look at a date range. In the query criteria i use "=now()" but i want the combo box selection to populate the rest of the criteria so it look like =now()+ XXX where XXX = a number of days, eg 14 or 30.
I am creating a Database to track product details and inventory for items we purchase.
I have several Tables and several Forms already working properly, except for one thing.
I have a Form called "Lights", and it contains a ComboBox called Light_Name and 6 TextBoxes: Manufacturer, Model_Number, Cost, Weight, Light_Type, Notes. It also has an Attachment Field linked to the same table.
I am using the Code:
Me.TEXTBOX = Me.Light_Name.Column(#)
to populate the Textboxes with the relevant info from the Light Table.
This works for every Textbox I have.
However I cannot get the Attachment Box to change. And when I try to add code to it I get a debug error. The Attachments are PDFs and I need them to show based on the ComboBox Selection.
I have tried the same code as above, and as I said, it gives me an error.
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID Company Contact Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I have a form based on a query.On the form I have 4 comboboxes.The combo boxes filter eachother without a problem (based on custom select query).Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)I try to say this easy.Master query contains 5 columns:
- group - type - job - insurance - charge
combo1 selects group (and filters records) combo2 selects type (from remaining records and filters again) combo3 selects job (from remaining records and filters again) combo4 selects insurance (from remaining records and filters again)
[code]....
This works great and the dropbox only shows 1 OF EACH DIFFERENT record...If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
I would like to put a date in a form the region and then a staff code and based on the three entries then auto populate the remaining cells if those three have been entered together previously. Is this possible?
