General :: Break Points In Code Module Fail To Work

Oct 16, 2013

Does your Tools Reference have an MS Office 15.0 Object Library?

Just had to share this strange occurrence in the VB Code Module:

I use breakpoints all the time, was just using them yesterday.

Noticed that some events seemed to act differently this morning. The front-end was approaching 88 MB (after compress) so it is time for a change anyway.

Created a new blank Access dB (Access 2010) and imported all objects from my last backup revision. Reset the home page and tools References. Matched the settings side by side. As usual, the database shrank from 88 MB to 60 MB. The import all objects will usually compress things about this much.

From the screen shot, put breakpoints in previous code, added a new Lost-focus event and added a message box. None of the breakpoints work. The message box fires on the lost_focus and all of the code in the Click event works fine. But, not a single break point would work.

Totally powered down and restarted the Windows 7 32 bit Enterprise workstation. Still no change.

Took the screen shot of Tool-References from the code module of a two week old archive version. Used it to evaluate my new imported object database.To my surprise, the Microsoft Office 14.0 Object library is now Microsoft Office 15.0 Object Library.Also put all the objects back in the same order. Saved and closed the new imported object database.Now, the breakpoints work just fine.

I had failed to reference the Office 15 Object Library and the VBA Extensibility 5.Office 14 Object Library is nowhere to be found except on my 2 week old backup archive.

Is this a Microsoft auto update? Is this what drives the breakpoint in the code module?

View Replies


ADVERTISEMENT

Problems With Break Points

May 25, 2005

I have a very annoying problem with my break points that I can not figure out how to fix. I have a database that when I place a break points on code it will not break the code and go into debug. I have created a very basic form with one button and the following code:

Option Compare Database
Private Sub Command0_Click()
Dim str As String

str = "this is a test"

MsgBox (str)
End Sub

The message box will pop up but the program will not stop on either on the str... line or the msgbox... line. I'm sure some how or another I turned off the debugger but I do not know how to turn it back on.

Thank you for any help.

View 1 Replies View Related

Whether To Code In A Form Module Or A Standard Module?

Dec 14, 2007

I'm wondering how other members here make decisions whether they want to place codes behind form or use a standard module instead.

I understand there is a performance penalty when you add another module (and use it), but am not sure whether one big fat module would be faster than several smaller modules with identical coding.

Furthermore, I know that some members use a hidden form to deal with startup and shutdown processing. Sometimes the processing has nothing to do with forms and would make more sense in a standard module, but since the form is already loaded, does it makes more sense to use the module behind the form than calling a function in a separate standard module to execute the needed code?

So, what do you tend to do in such situation?

View 14 Replies View Related

Forms :: Record Navigation In A Form Fail To Work

Jun 2, 2013

I have a data base in which there is a table where each record describe properties of one fishing trip. The first column in the table is a number (unique but not autonumber format) and I already made 10,000 records with only this index number . Now me and others in my lab are entering data to this table for each of the records.

The data entry is done using form which show one record at a time (lets call it "sail_info_F").

I made another form which has only two elements:

1. text box in which I enter a number
2. button which opens the data entry form ("sail_info_F") showing the record with the same index number as the number I enter on the text box.

(the code for this button is "DoCmd.OpenForm "sail_info_F", , , "[RECORD_NUMBER]=" & Me.TEXT_BOX_NAME"

So far so good and it does open the form in the wanted record. BUT when the form opens I can't use the buttons I have placed in this forms which move between records. Those were made with the wizard, and are working OK when I open the form directly without using the second form (The one which opens "sail_info_F" on a specific record).

View 2 Replies View Related

General Q - Code And Why It Doesnt Work All Of The Time

Feb 6, 2008

I am wondering why access does not follow its own code all of the time?

For example I have passworded forms following the tutorial on the Microsoft site. It mostly works when the participants fills in the wrong password we will get an error message box and when they cancel the password dialogue box it wont let the person enter the form - but not all the time. Sometimes if you press cancel it still opens the form anyway (without requiring the correct password).

This is similar with the module that I put in to prevent people from using the mousewheel to leave their record etc. Most times it works but sometimes it just isnt called on form load.

There is nothing wrong with any of these codes and when they work they work well but I cant seem to rely on access to do what is supposed to?

View 1 Replies View Related

Report - Page Break On A Specific Code

Jul 7, 2006

I have a report with grouping on a code - I would like to do a page break on the second code - I don't know where to start on this.

View 1 Replies View Related

General :: Outlook Emails Fail To Be Sent

Sep 17, 2013

I have an Access database update process that is run from the Win7 scheduler. I have attempted to instantiate or reference Outlook and send an email indicating the status of the process.

Outlook fails for some reason, but it works fine interactively regardless of whether Outlook is running or not.

I am now thinking of trying SendObject instead.

View 3 Replies View Related

General :: Why Does OpenRecordSet Fail On Linked Table

Jan 16, 2013

I split my database into a FE and BE to simplify the upgrading of the clients copy. I had a chance to implement that change today and except for this error all seems to be well.

The error is "Invalid Operation 3219 " and flags this line of code "Set rsTable = dbsCurent.OpenRecordSet("Import650tbl, dbOpenTable, dbAppendOnly) " when the error is triggered. The table Import650tbl is a temporary holding table to which I enter imported records. I then add some supporting information and then the records are added to live data table for further processing. After the data is added to the live table the information in the Import650tbl is deleted by a query to be ready for tomorrows processing.

This error prevents the process from working. I got around the problem by deleting the link to the BE for this table and creating the table in the FE. After that all was well.

Question: Why does the above OpenRecordSet fail on the linked table?

View 1 Replies View Related

Module Code Stops Working

Nov 17, 2006

just wondering why randomly certain modules in the form code stop working..

when you accidentally press return.. or do something in the wrong order.. or apply one rule to one control.. and then another control rule stops working..

so you have to delete the code.. right click on the control's event.. and re-insert the code into the event section.. and then it works..

why?

View 4 Replies View Related

Startup Module For Common Code

Oct 22, 2007

Is there a way, similar to Excel's "personal.xls", to put all my reuseable Access code into one central module?
Thanks in advance.

View 7 Replies View Related

General :: Query To Calculate Points Based On Dates

Jul 1, 2015

I am trying to create an attendance database, our company introducing the point system attendance,

Called Off (CO) 2 points
Left Early (LE) 1 Point
Tardy (Tar) 1 point

Employee can reduce point if they have perfect attendance for 90 days from the last day of violation. For example, an employee absent on 01/01/2015, he will received 2 points, the credit will giving on 04/01/2015, if there is no violation, but if he absent again on 03/31/2015 not only he will received 2 more points his 90 days will start from 03/31/2015, now he will eligible to get credit on 06/29/2015 and so on.So far I have created 3 tables and 1 query.

Tables

Employees: Id, Last Name, First Name
Points: Id, Description Points
Attendance:Id, Date, Employee ID, Points ID

Query
Date
Employee ID
Last Name
First Name
Point Description
Points

how and which formula to use which calculate the points based on above example.

View 14 Replies View Related

General :: Transfer-text Defaulting To 8 Decimal Points?

Mar 23, 2014

I have a Table with a Field set to Number, Single, Fixed, 2 Decimal points in which I enter Hours (ie 11.25) then at some point I want to extract those new entries to create a Text file transfer.

I have a Macro which extracts those new entries from the main Table and copies/appends them to a new Table which contains only the new data I need to create the File to upload into a Payroll system (using TransferText option).

It all works well EXCEPT, the File it creates insists on showing 8 decimal points and I just cannot get it to show 2 only.I have tried using a calculated field, setting the secondary Table field to Text.why or where these 8 decimals are coming from.

View 2 Replies View Related

General :: Put Line Break In Text Box From Keyboard?

Oct 17, 2014

Is there an equivalent to Alt-Enter in excel to put a line break in a text box from the keyboard?

View 2 Replies View Related

General :: Columns Break For School Year?

Feb 15, 2013

I have a report that needs to be set up in 2 columns using the school year, 2012-2013, 2013-2014, etc. My issue is this. The columns go down the page and continue on the right side for column 2 in the correct order. Is there a way to have the columns break for the school year?

I currently have this:
2012-2013 2014-2015
2012-2013 2014-2015
2012-2013 2014-2015
2013-2014 2015-2016
2013-2014 2015-2016

I need this:

2012-2013 2012-2013
2012-2013
2013-2014 2013-2014
2014-2015 2014-2015
2014-2015
2015-2016 2015-2016

View 1 Replies View Related

General :: How To Break Up A Table In Access Into Several Linked Excel Files

May 3, 2013

What is the strategy for doing this rather than the code (if it's possible)? I can code a fair bit of VBA in excel but I'm not too sure about what I'm doing in Access.

View 1 Replies View Related

Can Not Get Code To Work.

Sep 9, 2006

Hi, can someone help me with this code I do not get a return ( 5 ) or ( 10 ) ( 15 ).
Anyone have a solution,any help would be appreciated.

Private Sub cust_credit_score_1_AfterUpdate()

If [Forms]![test credit]![cust_credit_reply_1] = " [Bad Credit]" Then
[Forms]![test credit]![cust_credit_score_1] = 5

Else

If [Forms]![test credit]![cust_credit_reply_1] = " [Poor Credit]" Then
[Forms]![test credit]![cust_credit_score_1] = 10

Else

[Forms]![test credit]![cust_credit_score_1] = 15

End If

End If
End Sub

Thank You John527

View 7 Replies View Related

Functions Work In Code But Not Queries

Feb 14, 2007

I have a problem where I can create queries in code using functions such as Left() and they will work fine on my clients machines with a complied MDE file but if I try to use the same function in a saved querie they get an error: "Function is not available in expressions in query expression..."

The Queries work fine on my machine but not on those using Access Runtime. From my research it appears to be a problem with them not having the correct Reference on their machine. If that is true then which Reference do they need and is there away of installing that Reference by code?

Thanks for your help....

View 1 Replies View Related

I Am Stumped As To Why This Simple Code Won't Work...

Nov 2, 2006

Form: frmProduct
Field: unitprice.

I have some simple validation that unit price is greater than 0. The code is this:

If Me.txtUnitPrice.Value <= 0 Then
MsgBox "Please enter a value greater than zero", vbOKOnly, "Alert"
Me.txtUnitPrice.Value = Null
Me.txtUnitPrice.SetFocus
End If

However, when I run it, the setfocus doesn't work. It jumps straight into the next field. I can make it run to any other field (productname, productID). But not back to UnitPrice.

View 6 Replies View Related

Tabbed Pages - Code Doesn't Seem To Work

Nov 13, 2006

I'm using a 5-tabbed form and have put it in my detail section.
Within the on click event of one tab knob i would like to activate some knobs in the form header where the tab resides on.

I've coded everything properly but in one or other way access doesn't seem to communicate between the tabbed form within the details and the form header. Anybody an idea?

View 4 Replies View Related

Modules & VBA :: Repaint Doesn't Work Until End Of Code

Jul 31, 2015

I have a process which runs lots of slow append queries, so I want to reassure the user of progress, by changing the font colour of labels to green when the relevant queries have finished. This is the code I'm using

Code:
'Update the older data if that option is selected
If Me.Menu_YearOption.Value = 1 Then
DoCmd.OpenQuery "2-10 Append FY1112"
Me.lbl1112.ForeColor = 32768
Me.Repaint
DoCmd.OpenQuery "2-12 Append FY1213"

[Code]...

Each query takes about a minute to run, as it gets data from a sharepoint server, but the labels don't turn green one at a time as expected. Instead, I get the spinning wheel until all the queries have run, then all the labels turn green together.

Is there something else I should be doing rather than Me.Repaint ?

View 11 Replies View Related

VBA Code Doesn't Work After Saving In ACCDE

Oct 2, 2014

I saved my front end db as .accde in order to distribute it without user being able to edit my objects. As it turned out, when I open the .accde now I see my code doesn't work anymore. I have a lot of startup code and now it doesn't trigger at startup. Basically all my forms use vba code and none of them works in .accde . Accdb version works without any issue.

View 3 Replies View Related

General :: Module Crashing After Changing Window Mode In Macro

Sep 10, 2014

We have been calling a main form to manage yacht races using a hyperlink/macro from a selection form which lists all the yacht races ..The main form was too big to fit on some screens so we changed it to pop up mode to allow it to be resized and use scroll bars. this works well when the form is opened manually and all functions run just fine

the hyperlinik/macro for race selection had originally been set up to call the main form in dialog mode but we have had to change this as it disabled the resizing of the form and the scroll bars..The macro tool doesn't offer pop up mode so i selected window mode = normal and the main form opens with a resizable window and scroll bars but all the functions called from this module now fail (error message = use of null value or similar and all the functions go into debug mode - the server is down and i can't access the system to get the exact details)

If i change the macro in the selection form back to window mode = dialog the functions work but i lose the resizing of the main form and and the scroll bars.

View 1 Replies View Related

Error: Member Already Exists In An Object Module From Which This Object Module Derive

Oct 1, 2004

I am creating an form in a database and whenever one of my procedure's run it creates this error message:


The expression ON Load you entered as the event property setting produced the following error:
Member already exists in an object module from which this object module derives.

*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure].
*There may have been an error evaluating the function, event, or macro.

An ideas?

View 7 Replies View Related

Queries Randomly Fail On New PC

Nov 8, 2011

I have a database that I previously ran successfully on a Windows XP system. I recently received a new PC with Windows 7 Enterprise (32 bit) that is having issues with running queries from the same database. I am still running the same version of Access (2003) on the new laptop but the queries seem to stall out and Access becomes non-responsive. Can switching from one operating system to another cause this issue? I am really just starting to use Access, so I am a novice at troubleshooting and thought that I would ask this question before digging deeper.

View 6 Replies View Related

Insert Statement Fail

Apr 26, 2014

If I use this INSERT it works fine :

Code:
strSQL = "Insert into tblParkeerbeheer_log select * from parkeerbeheer where [ID] = " & Forms![parkeerbeheer]![fldID].Value & ""
DoCmd.RunSQL strSQL

But if I want to do the same with multiple records with Pnummer (personell number) as criteria in the WHERE clause :

Code:
strSQL = "Insert into tblParkeerbeheer_log select * from parkeerbeheer where [Pnummer] = " & Forms![parkeerbeheer]![Pnummer].Value & ""
DoCmd.RunSQL strSQL

It asks me to prompt the personell numer, while that number is present within the prompt box

View 3 Replies View Related

Search Code Work On One Form But Not The Other Form?

Jul 18, 2015

* This code works to search frmMember for criteria found in tblMember:

Private Sub cmdSearch_Click()
If Len(cboSearchField) = 0 Or IsNull(cboSearchField) = True Then
MsgBox "You must select a field to search."
ElseIf Len(txtSearchString) = 0 Or IsNull(txtSearchString) = True Then
MsgBox "You must enter a search string."

[Code] ....

* But this next code which I have copied and Pasted to frmEventInput, then renamed the frm and tbl, retrieves the same criteria as the above (tblMember) instead of the tblEventInfo...

Private Sub cmdSearch_Click()
If Len(cboSearchField) = 0 Or IsNull(cboSearchField) = True Then
MsgBox "You must select a field to search."
ElseIf Len(txtSearchString) = 0 Or IsNull(txtSearchString) = True Then
MsgBox "You must enter a search string."

[code]...

What am I missing?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved