General :: Can't Change Listbox Column Header Name When Data Source Is A Share-point List
Jul 30, 2013
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code:
sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _
" FROM ActivityLog" & _
" WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _
" ORDER BY ActDate;"
'MsgBox sqlstatement
Me.EditPOListBox.RowSource = sqlstatement
sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
I need to construct a very complex student/coach/time/day Database.
Every student can attend a lesson twice a week, on a particular day and time with a particular coach.
Every coach has his/her own time table (Days available, times available on those days).
So I want this effect on a form:
Day: Monday Coach: Jack Time: 10:00
So Coach is dependent on Day, Time is dependent on BOTH Coach and Day.
I got the first one working but I am stuck on the second.
I created a Table for every day of the week (Mon through Friday) and have each coach's name as the "header" of a column, in that column I have the times they are available:
Code:
Jack - Roy 08:00 - 09:00 08:20 - 09:20 08:40 - 09:40
In my form, in the event procedure of the second list box I have the following:
Code: Select Case [Swimming_Day_1] Case "Tuesday" [Time_1].RowSource = "SELECT [Coach_1].Value " & _ "FROM [Tuesday Times] " End Select
But now when I select for example "Jack" in the "Coach_1" List box, the "Time_1" list box lists 3 entries of "Jack", not "08:00, 08:20, 08:40" respectively.
How can I accomplish the above without having to create a separate Day/Times Table For each and every coach (There are 8 coaches and 5 days, and I want things as easy as possible to update coaches should there come extra or some leave maybe).
I have created a Asset database using MS Access 2010 & the same was published in SharePoint portal. Post publishing, all the "Query & Forms" are working as excepted but the "Reports" are not working.
The "Reports" is designed with "Group & Sort" option. Post grouping am able to see the "=Sum([Expression])" (i.e. Sum of the Value) value in MS Access Locally but not in SharePoint. Once i published in SharePoint, am getting "#Error" message for all the below expression wherever i have used in my reports design.
Expression Used: Below expressions are works fine locally & getting #Error in SharePoint. 1. =Sum() 2. ="Page " & [Page] & " of " & [Pages] 3. =Now() 4. =Date()
Is there any way I can use data in the row as a column header ? I only have 1 row of data which i want to use as a header to I can link it to other tables/queries.
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values? Is there a feature provided by MS Access 2007 can enable such a conversion?
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values?
Is there a feature provided by MS Access 2007 can enable such a conversion?
I have a Access 2003 file and I want to filter anywhere where there last name is "expired" and change the column first name to say "no". How do I do that?
If the data source changes for an Access database, do I need to recreate all the tables, queries, and reports? I am having quite a time with this issue. Thanks for any assistance you can provide.
I have an Access 2013 database that includes among its tables 4 externally linked ODBC tables in a SQLServer DB. They are linked tables, not imported. There are also relationships between these tables for some of the queries and reports in the Access DB. I need to make a copy of the database and change the source of the ODBC links to a different SQLServer DB. I have not been able to figure out how to do that without rebuilding the links with a new source definition created from scratch.
If I have a form with multiple list boxes, lets say named 10, 20 and 30. and multiple text fields called 15,25,and 35. Now I want to get a value in the list box based on the text box value so I make row source queries that looks like this.
SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![15])); SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![25])); SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![35]));
So now my question... Is it possible to make one query that picks up the 15,25 or 35 depending on wether it is being queried from 10, 20, or 35. The difference in name is always the same except for the first number so could it be made to reference where it is asked from?
I have a list box with 3 columns and one line on my form and am writing an update query that is to use the value from the first column of the query to update a record in a table. I have referenced the list box as ListBox.Column(0) but the code displays a value of null when I run it and the record that is to be updated is updated to Null (it is blank). How do I write the code so that the value that is in column 0 of this list box is passed through the code?
Does anyone know how to force a listbox to display an additional level of accuaracy in a listbox which displays a value based on an expression in a querry? My querry displays the value to 4 decimal point but my listbox only diplays the value to 2 decimal point. Thanks!
I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
I have a listbox on a form that looks up a table to to allow me to pick a stock location. The table only has 2 colums in it, the Primary Key Field (ID) and the Store location. When using this in a a form instead of getting the Stores Location, all I get is the ID. I have tried changing the Bound Volumn Value and the Column Count Fields, however no change.
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1 FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate() 'Dim LocQryStr As String 'Dim r As Integer 'Dim ctl9 As Control 'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
I wish to generate a new query consisting rows that I have selected in a multi colum list box. May I know if it is possible to work? I am totally lost now
So I created a search form which filters my results. Apparently I don't have enough posts to link to the source of the code though. The code is from this website, /forums/showthread.php?t=188663
I then wanted to allow users to double click a result in the listbox to take them to the form which contains details about that record, however the listbox doesn't point to the correct record.
-When nothing is specified in the search field, all records are shown in the listbox, but double clicking on the first record takes me to a form that has no information. Clicking the second record takes me to the Detail Form of the first record. -When information is put into the search field, the results are filtered and only a few display, however clicking the first result again takes me to a blank form while the second result takes me to the first record of the unfiltered list. There is no way to reach the Detail Form for the last result of the listbox. -I tried right clicking the results in the listbox and copy pasting the information. The first result gave me a "0", the second a "1", and so on and so forth. This was the same whether or not the information was filtered or not. -I tried switching to a combo box and got the same results.
Dim i As Integer, c As String With Me.ListBox.Column(0) For i = 0 To Me.ListBox.ListCount - 1 c = c & Me.ListBox.ItemData(i) & ", " Next End With c = Left(c, Len(c) - 2)
This works great!! Now I am trying to concatenate the column 3 of the listbox.
Tried to use the code below (pointing to the second column) but it always returns the first column data.
'Dim i As Integer, d As String With Me.ListBox.Column(2) For i = 0 To Me.ListBox.ListCount - 1 d = d & Me.ListBox.ItemData(i) & ", " Next End With d = Left(d, Len(d) - 2)
ItemData does not allow pointing to my 3 column of the listbox.
i have a form that will have a column called [animalID] which is a 5 digit number. Only the first numer really matters. If the five digit code starts with a:
1,2,3,4 = cat. 5,6,7,8,9 = dog
example
animalID 29878 - cat 67424 - dog 47812 - cat 92435 - dog
Managed to export a table to csv file. The problem I now have is I need to add the following Text at the start of the file:-
H,LKJ85485524,DE
and the new last line :- T,whatever the record count is,2
Whether this info is added before or after export is not important.
I have even resorted to using VBA to create an Excel spreadsheet and saving to csv.
Thought this had cracked it however I had surplus commas at head and footer where the original csv file had additional columns (ok manually delete these comas) ,then found that the end of each csv line was missing a final comma that is needed by the recipient of the file.
If I have a Query, and I want to list the sum of one of the columns of that query in another text box on a form, is this the correct way of doing it?
=Sum([Drivers Other Shifts].[Duration])
In this case, "Drivers Other Shifts" is the name of the Query, and "Duration" is the column header. When I try this I get #ERROR, so if it's just that something else is wrong, or that my expression is the wrong way to go about it...
