General :: Change Values In Combo Box

Aug 24, 2012

I have a form with a sub, and that sub has a sub. I'm on the first sub trying to change the rowsource of a combo box on the second sub, and none of the following want to work.

Code:

'Me!frmRentalsSubDetails.Form!cmbEquipmentID.RowSource = EquipFilter & Me.ToLocation & "));"
'Forms![frmrentalcontainer]![frmRentals].Form![frmRentalsSubDetails].Form![cmbEquipmentID].RowSource = EquipFilter & Me.ToLocation & "));"
'Me.frmRentalsSubDetails!Form.cmbEquipmentID.RowSource = EquipFilter & Me.ToLocation & "));"
Me![frmRentalsSubDetails].Form![cmbEquipmentID].RowSource = EquipFilter & Me.ToLocation & "));"

View Replies


ADVERTISEMENT

Forms :: Change Display Of Field Values On Combo Box

Feb 17, 2015

I'm trying to sort and filter a continuous form. I want to sort by descending and ascending, but I also want to have a combo box for filtering. For example, there a combo box for sorting with Value List as the RowSourceType, the list would be "Ascending" and "Descending", and there should be another combo box to choose the field to be sorted with RowSourceType as Field List from a query.

My field names are: "LastName", "FirstName", "MiddleName". But I want them to appear as "Last Name:, "First Name", "Middle Name". I want to be able to change the display of the field names within my combo box which should come from my query. How is that possible? I already tried to put caption in the properties but it didn't work.

View 6 Replies View Related

General :: Access Chart - Possible To Change Values On Axis Value

Feb 25, 2013

Access charts know if it's possible to change the value axis values.

I create a chart getting values from a query I run, it plots the values but auto selects the value range and the increment.

The values on the value axis are : 0, 0.25, 0.5, 0.75, 1

Is there anyway I can get the values to increase by 0.1 rather than 0.25?

View 1 Replies View Related

General :: Summing Total Values By Each Change In Date

Apr 14, 2014

Running Access 2010. I have a large data set here is sample:

Type Capture Date Volume
1 1/5/2014 7
1 1/15/2014 5
1 1/8/2014 3
1 1/10/2014 4

Is there any way to sum the total values for each change in date while keeping chronological order? To get access to produce something like this:

Type Capture Date Volume
1 1/5/2014 7
1 1/8/2014 10
1 1/10/2014 14
1 1/15/2014 19

View 1 Replies View Related

General :: Change Photo Depending On Combo Box Value?

May 29, 2013

I have a log in form and user combo box.

I want to add photo of each user in this log-in form.

Just want to ask if possible to change photo depends on combo box value?

View 1 Replies View Related

General :: Cascade Combo Boxes With Duplicate Values

Jan 18, 2013

I'm trying to Identify a particular entry in my table for editing via combo boxes. The same serial number will come in multiple times but a different job number each time it comes in. To identify a record for editing I need the user to identify the serial number in combo1 and then the job # in combo2 (cascaded combo boxes).

The issue I'm running into is that combo1 has dozens of serial number duplicates (combo2 is acting as it should). When I change some settings around I'm able to get combo1 to eliminate duplicates but now combo2 only shows 1 job # when there should be dozens for that serial #. I need all like serial numbers to show their job # in combo2 and I have not had any luck surfing around the net/forums/experimenting.

I'm pretty sure I have to use a Junction Table but I haven't messed with that and I'm not 100% sure that's the best/only way to do it.

View 8 Replies View Related

Forms :: Change Record Source Of Combo Box On Form Based On Another Combo Box

Mar 31, 2014

I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.

So my questions are:

1) can this be done
2)If it can be done, how can I do it?

View 3 Replies View Related

Change Combo Contents Based On Previous Combo Selection

Oct 20, 2005

Hi everyone,

I have two combo boxes on the same form bound to a table. I want the contents of the next combo box to change based on the previous combo selection e.g

cboContinent cboCountry
Africa Zambia
Africa Congo
Africa South africa
Europe England
Europe Holland

If I choose Africa in cboContinent, I want to see only Zambia, South Africa and Congo under cboCountry and if I choose Europe I want to see only England and Holland

Thanks
Humphrey

View 1 Replies View Related

Forms :: Populate Combo Boxes With Values Depending On Selected Value In Previous Combo Box

Aug 5, 2013

I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.

Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...

View 1 Replies View Related

How To Change Values On New Form

Mar 18, 2008

Hello again... back to the access newbie Qs... first some code:

Code:HoldDOC = CCC_Demographics_DOC_Number HoldApptDate = Date HoldProvider = Provider_ID HoldInterval = Interval DoCmd.OpenForm "Create New Pending Appt Record", acNormal, , , acFormAdd, acDialog Forms!Create_New_Pending_Appt_Record.DOC_Number = HoldDOC

Ok... we're looking to take some values from our current form (hence the first 4 lines) and put them into some form elements on the new form... the form opens (the OpenForm command's going through), but when we reach the last line we get a "cannot find form XXX" error... so how do we change the elements on the new form?

View 3 Replies View Related

How To Change All Values In A Field To 0

Jul 15, 2015

Is there a simple way to change all of the values in a field to 0 (zero)?

View 2 Replies View Related

Constraining Combo Box Values Based On The Value Selected In Another Combo Box

Sep 7, 2006

Thanks in advance for your help.

I would like to set up rules/constraints such that the value selected in combo box A determines the available values in combo box B. For example, "Combo box A" is bound to the [PartnerType] field and "Combo box B" is bound to the [PartnerRole] field. Let's say that the two choices in Combo Box A are "LLC", "LP", and "Corporation". There are 5 possible choices in Combo Box B: "X", "Y", "Z", "Q", and "U". If a user selects "LP" in Combo Box A, I would like Combo Box B to only show choices "X" and "Y". And if a user selects "LLC", only choices "Y", "Z", "Q", and "U".

Similarly, I would like to set this up so that Combo Box B is not initially visible--it becomes visible when a user selects "LLC" or "LP". If a user selected "Corporation", Combo Box B would remain hidden.

View 2 Replies View Related

Change Values In Several Records At The Same Time

Oct 30, 2005

Hi all!
This is kind of a philosophical question :)

I’m doing some changes to a “CRM”-database, and need to make a function that changes values in several records in one operation. The problem is, I have now idea on how to approach this problem.

One example; I have made a simple invoice function in my db, which works well. But now I send a lot more invoices then when I made the function. I’ve made a form, which prints the invoices, and I can print several in one “operation”. How can I, in the same operation, also change the status of the invoice record so that it says “Printed”?

If you have any suggestions on the method e.t.c.? Thank you!
(I'm using Access 2000)

View 1 Replies View Related

Change The Names Of Displayed Values

Jun 2, 2005

I have a query that looks through a table and shows me any calls that have a status of either 'O' 'or 'C'. What I would like to have in the query result is the O or C replaced with the words Open or Closed. Then when my count will make alot more sense rather than having O 29 etc.

I have had a look through the forums on the net and I am convinced this question has been asked before, but I am struggling to find the key word to search for

Kindest Regards

View 5 Replies View Related

Tables :: Change Default Values?

Aug 21, 2013

Access 2010. I inherited a database that I need to copy and get it ready for next year's data. There are several places in the various tables where the default value on a field is 2013. I need to change to 2014. Any vba code or macro that I can do this without opening all the tables to change the values?

View 10 Replies View Related

Forms :: Combo Box With Values Based On Another Combo Box

Jun 25, 2013

I have a main form that filters data in a subform based on selections via combo box users make on the main form.

So I have the 'department' and 'manager's name'. If someone selects 'Human Resources' from 'department' combo box, then I only want to see the managers that are in the Human Resources departement when I drop down the combo box for 'manager's name'. Currently I'm seeing all the managers and a user can select a manager that is not in human resources and get no data returned. I prefer for him to get a list of those that are in that department only. The source of the combo box is a query.

I got it! Found here: [URL] ....

View 3 Replies View Related

Combo Box Values Based On Another Combo Box Selection

Feb 6, 2013

I have a form, with a subform and another subform

Once a supplier name is selected from the combo box i only want it displayed that suppliers products in the subform, subform. (products combo box) I can get a basic query to show these results but can get the combo box to do the same.

The design screen is also attached below ....

View 14 Replies View Related

Reports :: Report From Query Need Values To Change?

Nov 20, 2013

Objective to have a report generated from a query (Based on a Storage Table) in the record-source however need to make adjustments to each record based on the query output ie User Id is outputted as number as it needs to be for everything else but on the report loading needs to run an sql query on that ID number to get the name and then replace that value with the name and so on for each record and each appropriate column

Problem:I can either change All of the records outputted with the first records info or nothing at all. i need this process to occur individually on each outputted record

View 10 Replies View Related

Forms :: Values Change According To Selecting Value From Another Field

Apr 16, 2014

I am working on a school database, today I am working for fee collection form and I am facing trouble.In attachment At the top right area the hidden field I would like here changes according to selecting Fee Type under Fee Detail. I want to achieve this,

If feetype is ABF then Hidden field = 1500110
If feetype is ASF then Hidden field = 1500120
If feetype is EXF then Hidden field = 1500130
If feetype is MTF then Hidden field = 1500140
If feetype is RBF then Hidden field = 1500150

How I can perform this ?

Table structure is
(tblstudents) Contain students data
(tblFee) Contain, Student Id linked with student table, month, year, amount, date, narratives and FeeType that looup values from FeeType tbl, this hidden field also in tbl fee.

The codes that are 1500100,1500120,1500130

These are necessary for GL entries that's why I must have it on my form. I had as well apply method of Default value but in that case I only present only a single value, but I want that in hidden field values take changes according to the fee type.

View 3 Replies View Related

Tables :: Change Duplicate Values Error Message

Aug 14, 2013

How to control the below message to something like this through VBA:

"The Job: " & JobNumber & " already exists in the table." or to open an alternate form where they can make the change. Allowing duplicates is not appropriate for what I am trying to accomplish. I just want a friendly way of rerouting a user to understandable answer.

instead of this:

"The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again."

View 2 Replies View Related

Modules & VBA :: Allow User To Change Default Checkbox Values?

Jun 20, 2013

I've got a form (frmEdit) that allows users to search tblMain for records using a bunch of unbound controls and a dynamically created SQL statement. Search results are displayed in a subform (subMain), and the current record in the subform is displayed in a set of bound controls on frmEdit.

Now the important bit: There is a set of unbound checkboxes on my form that allow the user to change which fields are visible in subMain. This is accomplished by the following:

Code:
Private Sub chkName_AfterUpdate()
If Me.chkName = 0 Then
Me.subMain.Form.CorrespondingField.ColumnHidden = True
Else
Me.subMain.Form.CorrespondingField.ColumnHidden = False
End If
End Sub

Certain fields are visible by default, but the user may want to change which fields those are. Here's what I've done so far to accomplish this:

Created a button (btnChangeDefaults) that opens a form (frmChangeDefaults)

Put checkboxes for each table field on frmChangeDefaults

Put a "Cancel" button (btnCancel)* and "Done" button (btnDone)** on frmChangeDefaults.

*btnCancel just closes frmChangeDefaults without making any changes to frmChangeDefaults or frmEdit

**btnDone changes Forms.frmEdit.Form.chkName.DefaultValue to Me.CorrespondingCheckBox.Value and then closes frmChangeDefaults

This all seems to work quite well, actually. Debugging confirms that the default values of the checkboxes on frmEdit are indeed changed when I click btnDone. But when I close frmEdit and re-open it, the default values return to what they were prior. This happens even when:

I close frmEdit using DoCmd.Close acForm, "frmEdit", acSaveYes

I close frmEdit after using DoCmd.Save acForm, "FrmEdit"

I save frmEdit manually by right-clicking and pressing save

What am I missing here?

View 2 Replies View Related

Modules & VBA :: Change Check Box Values Of -1 To YES And Then Fill Word Template

Jul 26, 2013

I have the following VBA code that auto populates a word template:

Private Sub Command24_Click()
On Error GoTo ErrorHandler:
ErrorHandler:

[Code].....

The code executes flawlessy but there are three values that are based off check boxes set as YES/NO (EMPLOYEDATREGISTRATION, EMPLOYED and FRINGEBENEFITS). These values show up as -1 for YES and 0 for NO.

Is there anyway to add code to mine that would allow me to change these values before they are sent to the Word template?

View 10 Replies View Related

Tables :: How To Change Values Within Calculated Column Without Changing Expression

Jul 31, 2014

Currently I have a calculated field in my table; however, under certain circumstances I need to change the value to another value which is not related to the calculation. I understand that the calculated fields are read only (why is that?), so I was wondering if there was any way to change values within a calculated column without actually changing the expression itself.

View 1 Replies View Related

Forms :: Change Button Enabled Status On Field Values

Jun 22, 2014

I have several buttons on a form and I want to set enabled = false on one of them when I open the form - that's fine

I have two txt fields - ReceiptNo and BankPaymtId if the both have a value I want to make the button enabled = True

This is the code I have used on the BankPaymentId On Dirty event

Private Sub BankPaymentId_Dirty(Cancel As Integer)
If Me.[ReceiptNo] <> "" Then
If Me.[BankPaymtId] <> "" Then
Me.CreateOutlay.Enabled = True
End If
End If
End Sub

This is the one for ReceiptNum on Dirty event

Private Sub ReceiptNum_Dirty(Cancel As Integer)
If Me.[ReceiptNo] <> "" Then
If Me.[BankPaymtId] <> "" Then
Me.CreateOutlay.Enabled = True
End If
End If
End Sub

Nothing seems to be happening.

Even the Form on Dirty is not working now....

View 4 Replies View Related

Modules & VBA :: Combobox / Listbox Change Event Populate Values In It

Nov 21, 2013

I am trying to write a code that will execute at the change even of the combobox/Listbox and when a character is typed in it then all the data from "DocumentType" field whose first character matches with the first character typed in Combo/Listbox will be stored in it.

The following code doesn't work:

Private Sub ComboBox4_Change()
Dim strText, strFind As String
strText = Me.ComboBox4.Text
If Len(Trim(strText)) > 0 Then
strFind = "BarcodeRef like '" & strText & "*'"
End If

[Code] .....

View 1 Replies View Related

Combo Box Value Needs To Change With Record...

Sep 22, 2005

There are two main methods of navigating around the top-level form on the database I am currently working on.

One is by a drop down menu listing GP practice names - so you can scroll down to "Dr Watson" for example and then all the subforms display the correct info.

The second way is by clicking on "Previous Surgery" or "Next Surgery". This is obviously a lot easier for data entry than having to use the drop down menu each and every time!

However there is a problem, in that when one uses the second method - the highlighted value in the combo box does not change! You can literally navigate through hundreds of surgeries, and though the address changes in the subforms etc "Dr Watson" is still proudly displayed in the combo box.

So we have a situation where it would be pretty easy for someone entering data to think they were on the correct record when in fact they were not, leading to errors in input.

Is there a way to force the combo box to "refresh" to the same value as the current record, effectively displaying the title?

Thanks
Gazz

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved