I have created an accdb file and saved as an accde file. The accde file opens with a form with command buttons. But the commands buttons do not work with the accde file (they do work with the accdb file). How do I get them working.
View RepliesHow do I make an accdr file out of an accde file?
View 9 Replies View RelatedI do not see the Make ACCDE button. I'm using Access 2010 32 bit. Have an ACCDB FE file which I'm trying to create the ACCDE. I've compiled and fixed the VB errors. I've review trusted sources and insured the folders are trusted. For whatever reason, the button is not showing.
View 2 Replies View RelatedTrying to lock down an application by saving as ACCDE file. Saves OK but when you load application none of the controls work. I.e. button clicks do not launch "Open Form" or " Print Report" commands.But in ACCDB format application works flawlessly.
When I tried on a different machine I get an error message that says too many Table IDs. Odd since I only have 3 forms, 3 tables and 3 reports. Lots of DoCmd's and switching between the 3 forms but not sure why this would create "too many Table IDs"?
I've Saved an Access 2010 File as an .accde version that opens Ok however none of the buttons (eg; delete record, go to first record, next record) that I placed on the form work at all (the standard record selectors at the bottom of the form still work). All the buttons work fine in the .accdb version - only the .accde version that doesnt work...
View 1 Replies View RelatedI was trying to incorporate the changes suggested by a member of this forum into my Form. I opened the Form in Design View. I clicked the Command Button and placed the mouse at the insertion point. The command button also appeared. Thereafter, nothing happened. Earlier, whenever I placed a command button, it asked for action to be performed in relation to that command button. But now nothing happens and I don't know what to do. Please tell me how I can bring back the feature.
Thanks.
I just created my very first db... I used the wizzard to create it most of it, including command buttons that permit you to move from the one form to another form/report. I saved the db to a shared drive (two people total accessing/updating it) only to find that the command buttons don't work for her. I created the db in 2003, but she has 2007. If I upgrade to 2007 and convert the db, could this solve the problem? THANKS!!
View 5 Replies View RelatedI have an Access 2010 database with two tables and two forms. The tables are Organizations and People. Similarly, the forms are Organizations Entry Form and PeopleEntryForm. The People are linked to the Organizations table. Several people can be linked to the same organization.On my Organizations EntryForm, I created a command button to duplicate a record using the wizard. It works fine.
I did exactly the same thing on the PeopleEntryForm, but instead of copying the record, it creates a new blank record. I don't get any error messages. Is my problem due to the fact that the People table is linked to the Organizations table?
I am in trouble with the shell ocmmand,i have a text box "ExcelPath Location" in which there is a path of excel file i am using below code to open the excel file but it gives an error:
Code:
Private Sub Command11_Click()
Dim str As String
str = ExcelPathLocation.Value
strPath = Dir(str)
Shell "excel.exe" & """" & strPath & """", vbNormalFocus
End Sub
the value of text box is
O:QA FilesQC ReportingPending ReviewB329129)419479_BoxPort_RAMANDEEP BRAR_(10192013.xlsm
it gives run time error : 53 file not found.
I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
I saved my database as ACCDE file which is executable now the problem i am facing is i can't edit my database since i can not view it into design view.
How can i change it to its normal file format
Using Access 2010 32-bit. I have a report that contains a Graph Chart (class = MSGraph.Chart.8). The reports works fine using the uncompiled .accdb. When I compile to .accde, the report is not rendered...I get an empty report screen as though Access is going to produce the report and nothing happens. I have to terminate Access using the "X" at the top right.
View 3 Replies View RelatedI have set up a database that houses file locations. The form that I have made shows a job # and the files that correlate with it. I would like to set up a command button that will read the file name and open it in Excell. If any one know how to do this I would greatly appreciate the help.
View 3 Replies View RelatedI am trying to open a workbook with a command button on a form however the path to the file is giving me a fit. The path for the file location contains spaces and I am going blind trying to figure out how to rectify the path. Heres the line. I am sure someone here will see this problem quick! Thanks.
Private Sub Command0_Click()
On Error GoTo Err_Command0_Click
Dim stAppName As String
stAppName = "Excel.exe N:OPSCOMMONOpsResearchContact CenterDI CCL Reporting dBApps by Agent.xls"
Call Shell(stAppName, 1)
Exit_Command0_Click:
Exit Sub
Err_Command0_Click:
MsgBox Err.Description
Resume Exit_Command0_Click
End Sub
Heres the mess I made out of it:
stAppName = "Excel.exe N:OPSCOMMONOpsResearchContact" & Chr(32) & "CenterDI" & Chr(32) & "CCL" & Chr(32) & "Reporting" & Chr(32) & "dBApps" & Chr(32) & "by" & Chr(32) & "Agent.xls"""
:confused:
Is this possible? A command button when click will open an excel file... :rolleyes:
Cheers!
Sheila
I would like to open a PDF document using a button control on a form to a file path listed in a field on the form (Me.Link). I am trying to use the followHyperlink code but I keep getting the runtime 490 error.
This is the code im using:
Dim strFilePath As String
strFilePath = Me.Link
Application.FollowHyperlink (strFilePath)
If I put a filepath to one of the pdf documents in the place of (strFilePath) it opens that pdf document fine but not when I declare a filepath based on the one listed on the form.
I need to open a specific pdf file per record by using a command button. The pdf files will all reside in a specific folder in a partition on my hard drive. Each pdf file will have a unique four digit file name e.g 1234.pdf.The file name will match a unique number allocated to each record. This number is generated by adding 1000 to the record ID.Record 10 will therefore have an associated pdf file name of 1010.pdf.I have created a text box field , named 'TestReportID', to capture the unique four digit number per record that I assume is needed to be referred to when setting up the code to find and display the correct related pdf file.
I have set up a command button on the records form and as simple test using the hyperlink address to the folder where the pdf files reside, I can open a pdf file by clicking on the command button but it does not matter what record is open when I click the command button, it will always open the same pdf file.If I don't identify a specific file name in the hyperlink address, when I click on the button it will display a file open dialog which lists all the relevant pdf files and I can then select and open the required file.I would like to cut out that step and get the correct file to open when I click the button.
Hi All,
I have three excel files (ActualHires.xls, ActualPromotions.xls and
ActualSeparation.xls). These are password protected files (with the
same password). They are linked to an access database and whenever the
files are opened, one must supply the password and click the 'Enable
automatic refresh button.' What I was wondering was if this could be
done in access with a command button. I have pasted some code below
that I found but now I'm getting an error.
This is the code:
Dim BookNames As Variant
Dim B As Long
BookNames = Array("O:ExcelFilesActualHires.xls",
"O:ExcelFilesActualPromotions.xls",
"O:ExcelFilesActualSeparations.xls")
For B = LBound(BookNames) To UBound(BookNames)
WorkBooks.Open FileName:=BookNames(B), _
UpdateLinks:=3, Password:="*******"
WorkBooks(B).Close SaveChanges:=False
Next B
But when I click the button, I get this error:
Run-time error '9' Subscript out of range.
and this line is highlighted:
WorkBooks(B).Close SaveChanges:=False
Any help would be greatly appreciated.
Thanks.
I would like to create a form that allows me to search for a folder on my desk top, then once located i can transfer that file to a specific location on another drive, Similar to the Browse / upload function you see on many applications.I am using Access 2003. Is this possible??
View 5 Replies View RelatedIs it possible to have a command button on a form to run the Text File Import Into a Table Wizard?
View 13 Replies View RelatedI have created a database for a church cemetery. It contains the usual names, birthrates deaths, etc.... I have also created a map of the cemetery in PDF format with the lot number highlighted which is assigned to a particular record. I did the same in excel with a layout of the lot and a JPEG picture of the grave marker. In my table I created Three columns - Site Plan, Lot Plan, and Grave marker. I insert the specific site plan, lot plan, and jpeg picture using the "insert object" in the table. On my form after a search, I have created three buttons.. Site Plan, Lot Plan & Grave Marker.
I have looked and experimented trying to assign these command buttons to open these files on the form. I don't have any experience with macros or VB code.
I have have a form with 4 subforms in it, one of the subforms is based on a filtered query . For a reason I can not work out I cannot get it to requery when I add a new record.
To add a new record I select from a combo box and use a command button to save the record
I have tried using this in the buttons on click event
Code:
Forms.trialcatalogueF!TrialCompetitorsSF!competitorsSF.Form.Requery
with no result, however it does kinda work in the combo's after update event, just not until I select another value.
I am trying to open MX Excel using a command button. I have tried using a hyperlink a various codes that i have found online with no luck. The Excel file is being used by the Access as it bring data from the spreadsheet a displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button i am met with errors and the file will not open.
View 6 Replies View RelatedI have a form. and it has three buttons. Such as Submit, Reject, Under Observation.
I want :
1) If i click SUBMIT button it will be disable and other two buttons REJECT and UNDER OBSERVATION will be enable
2) If i click REJECT button it will be disable and other two buttons SUBMIT and UNDER OBSERVATION will be enable
3) If i click UNDER OBSERVATION button it will be disable and other two buttons SUBMIT and REJECT will be enable
I am using access 2010 and I created couple of buttons on my forms that do some stuff in vba, but beside triger them with mouse I would also like my users to be able to have shortcuts on keyboard so for example I have btnClose an I widh when user press ALT + that btnClose do the same thing as it is doing when you press mouse on it.
View 4 Replies View RelatedI have a macro that Runs from a button that I attached to a form called " plans" the macro opens up a Dialog form from which I select a drawing number from, on selection of that drawing number a query is run and finds the information I want
The problem I am having is when I close the query the macro button goes active so if I want to run another query using the button it goes to the last record I selected. I have tried the refresh command but that does not work..I really need the button not to be active when the query is closed.