General :: Command Button To Insert Records From One Table To Another
Aug 11, 2013
I have two tables, one is GENETIC and the other one is BoneSampleDNAprofile. Both tables have the field CY-Code. I want to create small form with 2 text box fields and one command button on the form to be able to insert CY-Code from the table GENETIC to designated DNA_LAB_Code in the table BoneSampleDNAprofile.
In that small form I would type DNA_LAB_Code and CY-Code where after pressing command button will insert CY-Code for the designated DNA_LAB_Code. This is continuous process after our Laboratory receive results from DNA laboratory. I have attached two .png files which are example of two tables.
I have 2 tables, one has a list of comments indexed by numbers.
The second table will be populated with numbers that correspond to the first table based on usage of the form that I'm about to describe.
The form contains several check boxes. Each corresponds to a comment from the first table. If 3 of the check boxes are selected when the command button is pressed, I want three separate new record entries to go into the second table and the data that I want entered is the text in the label that is next to each check box on the form. After the records are added to the table, I'd like to reset the check boxes.
I simply cannot figure out how to code the button to do this.
I am at work, and I have acquired a database that prints labels. They now want the database to be coded so that after certain labels are printed the database will print a blank label. I have the code figured out as a Do While statement in order to print the blank label. The problem I am having is that I am trying to use the Insert Into command to insert the filepath into the table that adds the blank label.
|DoCmd.RunSQL "INSERT INTO Rod_tmakLabels ( Print, [Order] ) SELECT Yes AS Expr1, 'Rods Labels' AS Expr2"|
If I run the above command, it just adds the text "Rods Labels" at the end of the table. Is there anyway with the INSERT INTO command that I can insert the new label between the 2nd and 3rd row and add another row? Or is the command designed only to add a new row to the end? I haven't had any luck searching for this yet.
Well the title says it all. I need to create a button to lock the info on the form so it can't be edited and at the same time insert the date. Any ideas?
I have have a form with 4 subforms in it, one of the subforms is based on a filtered query . For a reason I can not work out I cannot get it to requery when I add a new record.
To add a new record I select from a combo box and use a command button to save the record
I have tried using this in the buttons on click event
I am trying to open MX Excel using a command button. I have tried using a hyperlink a various codes that i have found online with no luck. The Excel file is being used by the Access as it bring data from the spreadsheet a displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button i am met with errors and the file will not open.
I have a form. and it has three buttons. Such as Submit, Reject, Under Observation.
I want : 1) If i click SUBMIT button it will be disable and other two buttons REJECT and UNDER OBSERVATION will be enable 2) If i click REJECT button it will be disable and other two buttons SUBMIT and UNDER OBSERVATION will be enable 3) If i click UNDER OBSERVATION button it will be disable and other two buttons SUBMIT and REJECT will be enable
I am using access 2010 and I created couple of buttons on my forms that do some stuff in vba, but beside triger them with mouse I would also like my users to be able to have shortcuts on keyboard so for example I have btnClose an I widh when user press ALT + that btnClose do the same thing as it is doing when you press mouse on it.
I have a macro that Runs from a button that I attached to a form called " plans" the macro opens up a Dialog form from which I select a drawing number from, on selection of that drawing number a query is run and finds the information I want
The problem I am having is when I close the query the macro button goes active so if I want to run another query using the button it goes to the last record I selected. I have tried the refresh command but that does not work..I really need the button not to be active when the query is closed.
I am trying to open MX Excel using a command button. I have tried using a hyperlink and various codes that i have found online with no luck. The Excel file is being used by Access as it bring data from the spreadsheet and displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button (To open the excel file) i am met with errors and the file will not open.
I have a subform where you can add multiple records. i have a command button labelled NEXT (which obviously navigates to the next record) but I only want this to be enabled when there is more than one record.
I am OK on the enabling bit but how do you specify if the record number >1?
Does someone have time to start me off on some code?
After inputting data into a text box on a form i want to click on a command button which will open an email program and then put the text there so i can send it.
I have created an accdb file and saved as an accde file. The accde file opens with a form with command buttons. But the commands buttons do not work with the accde file (they do work with the accdb file). How do I get them working.
Beginner using 2010. I wish to play MP3 files from a command button on a form. I would like to avoid third party / ActiveX controls if possible.
I am aware that use of "CurrentProject.Path" will be useful to locate the MP3 file within a directory within the Project Folder.
But have be baffled by the sparse previous postings about this subject (going back to 2004). Searching this forum yields zero results on the term "MP3".
This accdb/e will be used to present historical information to a small number of people and will be used with runtime without user input.
And all I need is Play / Pause / Stop. No other functions required.
How to modify an existing database template to meet my needs.
I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.
I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2
I have an access form that fills an access table (MS Access 2003). Also, I have a Word (2010) document/template with some template text and empty fields which should be filled with data from access. Is it possible to insert a button in access form which would open a word document and populate appropriate fields with data from that form?
I am trying to create a command button in Access to generate a Meeting Invite. I found code for creating an Appointment and it works great but cannot get it to invite attendees.
Private Sub AddAppt_Click() On Error GoTo AddAppt_Err ' Save record first to be sure required fields are filled.
Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with the text from column 2:
NL-F and NL-M = Normal VUS-F and VUS-M = Variant of Unknown Sig. A-M and A-F = Abnormal
There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.
Cytogenetics ID Result Final TAT Date 14-0390 Normal 4/11/2014 14-0396 Variant of Unknown Sig 4/18/2014
I am trying to create a command button that will delete the current records in both the subform and main form.
I know how to create a command button that will delete the current record of which ever form I'm in (either the sub or main form) but I wish to do so both at the same time with one event procedure. I currently have been experimenting with a button in the subform but I don't really care if it's in the subform or main form.
frmPayments (Bound to tblPayments) - Main Form for payment entry. frmInvoice Sub (Bound to tblInvoice) - Sub form to display not paid invoices.
What i need is a Command button , lets named it "Commit", to perform a few tasks :
1. When click, prompt message asking whether to Save current payment record when all relevant input is completed during data entry.
2. If Answer is "Yes", then it will compare the "Invoice No" on the Main Form with the "Invoice No" of the Sub
Form , and if found to match, then put a tick in the "Yes/No" field of Invoice Table (tblInvoice) against the matching "Invoice No" of Main Form. This is to record payments made to this particular Invoice in Invoice Table.
3. Proceed to save current record, Refresh Main Form to be ready for a new data entry.
4.If Answer is "No", discard all current entries in the Main Form, Refresh to be ready for a new data entry.
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
Is there a way to have a command button on a form, when pressed change all fields in a Table to show unchecked? I am using a Table that has nothing but Yes/No fields in it. If this is possible, what might the code look like? Table name is "InputH-1".
You guys/girls are awesome! Thanks in advance for all your help!