Is there an easy way to convert an old ACCESS db from version 2003 to version 2010?
My ACCESS db is .mdb and I want to convert it to .accdb as version 2010. It has hundreds of modules that may take awhile to export. Exporting is the only way I know to transfer from one db to another.
I have a mdb access 2000 database that I want to convert to accdb. I can't for the life of me get it to work as when I try the save as access 2007 it always tells me I have the database open exclusively which is normal as I am the only user at the time when I want to convert it... not quite sure how I can open my database not exclusive? I have tried read only but doesn't work either...
thanx for any advice you might have...
I have a (Access Data Project) ADP project which was created in Access 2003.I need to convert it into an ACCDB file with Access 2007. How to do this besides exporting each and every table, query,report etc one by one ? I was hoping there was something where I could import or export the whole thing in one go.
View 2 Replies View RelatedI am using accdb but I wanna convert some datas into mdb, but I really don't know how to do this?
View 3 Replies View RelatedI am in the process of updating a database to 2010 (.accdb) and cannot get past a problem. We are using Access 2010.
I updated the back end data to .accdb with no problem. I can't link the front end to that data without updating the front end to .accdb as well. There are no tables in the front end.
I try to update the front end to /accdb and I get the error message 'You are trying to convert an encoded database. Decode the database, then try again.'
How do I decode the database? I tried setting a password and then unsetting it, but that made no difference. I have not previously encoded the database.
can't finish the update to .accdb data. The alternative is to stay with 2003 MDB data. Is that a bad thing?
I have MS Access on my PC however wish to move the accdb file to a network location to allow other network users to have access to it.
Unfortunately a few of the other users do not have MS Access. Is it possible for them to still open the database without any admin or background - I would like them to be able to use the forms and 'front end'.
We have a split A2010 accdb, and the backend is now 1.8Gb so I need to do something If I put each of the 4 main tables in 4 separate backend accdbs, will the fact that the frontend then needs to link to 4 accdbs in some way impact on performance? Another possibility (given that 90% of our work only needs the recent data) is that I split the 4 main tables into 'archive' and 'current' (= recent) tables, with all the 'archive' tables in one accdb and all the 'current' tables in another accdb: but that would make it more difficult to run reports etc over the entire data Putting the 4 main tables in 4 separate backend accdbs seems like the answer to me - but are there any other considerations to this.
View 14 Replies View RelatedI have a database with extension .accdb. When I open it, everything is locked. I can't access VB Editor, Navigation Pane, Ribbon, nothing. It just opens a form and the only thing that can be edited are the text boxes on the form. I can't use Shift when opening it, that does nothing. It does not prompt for a password when opening.
View 13 Replies View RelatedI have a .accdb with security where ihave hidden navigation pane and toolbars...
Now left with one more thing, is it possible to disable anyone trying to import stuff from my database?
Maybe some code or is there a setting somewhere in current db?
I'm building an application in MS Access 2010.
This application must be able to read from a big table in a separate accdb.
This separate accdb contains info that should NOT be available for all my users to copy, as it is valuable competitive information that could be abused by people with bad intentions. So, a linked table solution is not an option.
However, it should be possible to run parameterized queries that do simple look-ups that return only small/relevant portions of the database.
I need to recover a database password (.accdb). How or is there any good software password recovery out there?
View 7 Replies View RelatedI have Win7 Pro 64 bit and Office 2010 32 bit on my desktop machine. I have a laptop with Office 2007 and Win 7 Home Premium, 32 bit. I do NOT have Office 2010 SP1 because I heard there was some conflict between 2010 SP1 and Office 2007. I switch frequently between both (one on the desktop and one on the laptop).
I do not have this issue on the laptop ... they are both Win 7 64 bit, but the laptop has Home Premium and Office 2007 and the desktop has Office 2010 32 bit.
I converted some of my Access databases to the newer accdb from mdb format. The databases work fine on both computers. BUT, if I double click on the file or a shortcut to the file on the Win 7 Pro/2010 machine, a COPY of the file is opened and named "Filename1". If I double click again on the file or a shortcut to the file, then a different copy is opened and named "Filename2" (and this is a copy of the original "Filename", NOT the first copy "Filename1".) Of course, any changes I make to the file are saved in the new file name.
AND, if I double click on a copy, Then a NEW copy is made ..."Filename1" is copied to "Filename11"...The only way to open the original of the file is to select it and choose "open with ..." and Access.This does not happen with mdb files, or any other files that I can find. It also doesn't happen on the Win 7/2007 machine. It happens on every accdb file on the desktop machine, whether its a converted file (from mdb) or a brand new accdb file.I was ticked at my daughter for constantly creating "new" database files called Database, Database1, Database2, etc.! And she was frustrated because her changes were "never" saved ... they were, but not in the file she was clicking on.
Older daughter has a laptop with the same operating system (Win7 Pro, 64 bit) and the same version of Access 2010, 32 bit (installed from the same disk).I copied my file over to her computer and opened from Access, by double clicking in Explorer and by double clicking a short cut and it never duplicated the file. I did a repair of Microsoft Office on my desktop computer, using the install disk and that did not fix the problem. If I go to the Explorer right click on the file and choose "Open With" then, when the file opens, it is NOT duplicated. Or, if I open Access first and then open the file, it is not duplicated. So, maybe a file association problem? I changed the association to Excel.
I've been using this computer and Office 2010 since last July (2012).I discovered this problem in May and did some file checking and found copies of files created in February and forward ...
I have a sharepoint database accdw which works well as I can update something and sync it to the server, and another user with the same database can receive the changes just by syncing.
However, I want to share a version of this database with a different start up form, some restricted forms etc. If I make a copy of the accdb it creates and make changes to that, it still synchronises those changes and they affect my own version.
What is the correct way to create a different database version from my accdw?
All I want to do is take the accdb it creates, change the startup form and give it to somebody to use.
I have an accdb built using Access 2013 that will run with in 2010 Runtime. I am about ready to distribute the application, and am starting to do some research.
When I attempt to package and sign the db using the feature in Access 2013 it asks for me to "Confirm Certificate".
Before I go buy one I want to 1) try to create on myself and 2) learn about some good places to buy them.
1) I created a "Self-Signed" certificate using IIS, but the certificate doesn't show up on the list of certs when I attempt to package and sign the accdb. Is there a way to use a "Self-Signed" certificate to package my accdb?
2) If purchasing a SSL is the only option. Where is the best place to buy a SSL that I can use to package and sign accdbs from Access 2013?
I have a database that is saved as an accdr so it can be compiled for distribution as an exe..I have just found the accdr the exe installed and renamed to accrb and was then able to open it and view all the tables, forms etc.Obviously I cant stop someone renaming but if there was a way to stop the forms, tables etc opening.
View 8 Replies View RelatedI'm getting this error (invalid procedure call or argument - DLL error 0, number 5) on my accde file but not on the accdb.
View 1 Replies View RelatedI've got the forms and queries in one .accdb file and my tables in a separate .accdb file. The forms file links to the tables in the tables file. The tables file resides in a folder called simply enough C:acc_tables and thats where i browsed to (obviously) when i set up the linkage.
One of the users does not wish (for whatever goddamn reason) to create a C:acc_tables file to stick the tables file in , and wants the tables file in some other folder.. Unfortunately this user does not have the skills to delete the existing links and re-link to the tables file after putting it in the folder he wants.
Where in the file that holds the forms and and queries do i find the path setting to the tables linked file? Can it be changed without deleting links and then re-linking?
I have a program abc.mdb and abc.mde, I made some changes to the codes in abc.mdb and now I have been trying to convert the access file from abc.mdb to abc.mde so that the users are able to use the updated file. However, whenever I make MDE file. It doesnt work but creates another file called db1.mdb instead.
View 9 Replies View RelatedI am trying to manipulate some Ebay data, which returns a string like "1d 00h 29m"
Is there a function I can use to convert this string to relevant hours in total?
I have a file called CAPTURE.BUF. I am trying to convert it to text. Here is what I ahve done, but I get the message box ever time.
Public Function copyFile()
Dim SourceFile As String
Dim DestinationFile As String
SourceFile = "C:PCPICSWCAPTURE.BUF"
DestinationFile = "C:INVESTMENT_REPORTSCAPTURE.TXT"
On Error Resume Next
FileCopy SourceFile, DestinationFile
If Error > 0 Then
MsgBox "Could not copy mls file."
End If
On Error GoTo 0
End Function
Using 2010 (accdb format) on windows 7.I'm trying to convert a memo field's format from Plain Text to Rich text. The problem is that every time I try to select the Rich Text format option the field immediately changes back to Plain Text.
Just as a test a created a new memo field in the same table and set this to Rich Text (worked fine) then copied the records for the Plain text memo field to the new memo field. Unfortunately this removed all line breaks so instead of my text looking like
I'm getting sick of Access 2013 constantly doing this. I convert a macro to VBA form the ribbon menu then it doesn't run!
I've uploaded a screenshot of the latest error to irk me. This ran perfectly well as a macro but since i converted it to vba. (cos somethings i can do easier in vba than in macros) it doesnt run.
I am trying to convert a table that looks like the following...
Customer Name SumofSum of Bill Rate Reviewer
000462 John 500 Mike
000224 Mike 900 Jeff
I would like to covert it to....
Customer 000462 000224
Name John Bill
SumOfSum.. 500 900
Reviewer Mike Jeff
I don't think Access has any functions for this but I am not 100% sure. I know this can be done in a Module but I am not sure of how to code it.
When converting the Front End of my database to an MDE, Access just hangs and says (Not Responding). I've left it our an hour and there's no sign of stirring.The Back End converts in just a second or so.
View 5 Replies View RelatedI have form using a toggle option with four buttons. The values are 1,2,3 & 4. How can I convert the values to read (in the table) as words instead of values.
Example
1=dog
2=cat
3=bird
4=hamster
I have a text, date field I need to convert to a date field.For example: 2/11/14 is stored at text: 21114.How can I convert the 21114 into 2/11/14?
View 5 Replies View Related