In a form, the value of any field may determine if the other field will be true or false. For example in my form, inventory, if value in code is equal to 2 then the Field Table will be automatically false.
View RepliesOn my form ECOs
When my text box RELNUM is > 0 I want form properties AllowEdits set to FALSE.
When RELNUM is null I want form properties AllowEdits set to TRUE.
This must be possible, but not entirely sure where to start.
Since I can scroll through records in this form I'm thinking I have to put an event in ON LOAD, bbut beyond that I'm at a lost.
In access report, I'm trying to change color of text in specific records based on the true/false value in another record. Works in forms using conditional formatting, but won't seem to work in a report.
Here's what works in forms : IIf([2009 Symposium]=true, forecolor=255 ....this changes the records to red.
But using the same expression in a report doesn't change the text color.
I've built an IFF expression that is determined by a number of variables.
If any of the Data fields are filled I want the statement to return true.
If NONE of the four are filled in I want it to return false.
As it is, it returns true no matter what.
Here is the expression I'm using:
Title: IIF (IsNull([Data1] and [Data2] and [Data3] and [Data4]), True , False)
I have a report where my customer wants to be able to input a value and then be able to select whether the report shows values above or below that value. I have a combo box that has 2 values (1=Less than or equal to, 2=greater than or equal to). There is a text box where he inputs the rate to compare against (e.g. $75). When he hits submit, the application stores the values of the combo box and text box into global variable and then I have a public function that can be used to retrieve the values. GetHRate() gets the value to compare against and GetHRateCompare() gets the value to indicate <=(1) or >=(2).
In my query for criteria for rate I have this expression:
IIf(GetHRateCompare()=1,"'<=",">=") & GetHrate()
I've tried every combination of double quotes, single quotes, no quotes moving the GetHRate inside the IIf statement and nothing seems to work.
If I just hardcode <=GetHrate() into the criteria it works perfect but that does not achieve my goal of letting him select over/under at run time. Here's the full query:
SELECT qryCustomers_AverageTimeByScheduleID.ServiceName, qryCustomers_AverageTimeByScheduleID.ScheduleID, qryCustomers_AverageTimeByScheduleID.SumOfTotalTim e, qryCustomers_AverageTimeByScheduleID.PropertyID, qryCustomers_AverageTimeByScheduleID.PropertyName, qryCustomers_AverageTimeByScheduleID.MonthCount, qryCustomers_AverageTimeByScheduleID.AverageTime,
[Code] ....
My first question is how do I append 00001 so I can have a value for the false side of 9123400001 instead of 912341...My second question is why does it prompt me to enter parameters? It also produces all false values from the if statement...What I am trying to do is use a column that has either a Y or a N and using the if statement to correspond with different formulas depending on the Y or N.This what I have so far.
SELECT
IIF (ISRAILROAD=Y,9 & UCN & TXRTAREA, 9 & UCN & 00001 )
FROM CombinedUtility;
Using DoCmd.TransferSpreadsheet I'm exporting a table which has a couple of Yes/No fields formatted as Yes/No. However when I export, they appear as TRUE/FALSE? Am I doing something wrong?
View 3 Replies View RelatedI'm trying to limit the records on a subform via an option group selection. The group has 2 options: optionTrue (option value = 1) and optionFalse (optio value = 2). I have the following code in my query criteria of the true/false field.
IIf([Forms]![FrmHome]![frameProcessed]=1,-1,0)
The false part works, but the true part doesn't. I've tried many variations using true/false, using checkboxes, etc. and nothing works.
The database is SQL Server if that matters.
Any suggestions?
Also, is their a way to have an option for True or False or ALL?
Thanks,
Sup
I am trying to create a query pulling from several tables. I will use the example below to illustrate what I'd like to do.
I have a field called 'Acc_Num', one called 'Stat_Code', and a third called 'Cat_Code'.
Each 'Acc_Num' can have multiple records because there are multiple Stat_Code and Cat_Code values.
What I want to do is isolate just the Acc_Num records where Stat_Code = 1 and Cat_Code equals A1.
I also want to isolate the Acc_num records where the Stat_code = 1 and where Cat_code does not exist.
I have a complex IF Statement within VBA. When I step thru the code the if statement variables should return true but instead treats it as False. See '>>>> this happens on the 2nd Pass of a Do Loop Statement, the First Loop the if Statement Returns True
Variable Values:
Record 1
contractNo: 00001634
nfld: 33.40%
nTier6: 30.00%
Record 2
contractNo: 00001634
nfld: 137.52%
nTier6: 28.50%
so the 2nd if should be true but it acts as false an moves to next If statement.
Code:
If nfld = Format(0, "Percent") Then
nOvrAmt = 0
BkOvrCalc = nOvrAmt
GoTo cont:
'>>> ElseIf nfld > nTier6 Then
nOvrAmt = rs.Fields("TotalNetUSExp") * rs1.Fields("T6E").Value
[Code] .....
I am running Access 2010. I am building a form that is finding the "Docket Numbers" from three different forms. In order to get these numbers, I put in three text boxes with these statements:
Text box1
=[Forms]![Jobslist]![Docketnumber]
Text box2
=[Forms]![Jobslist2]![Docketnumber]
Text box3
=[Forms]![Jobslist3]![Docketnumber]
However, not all three forms will necessarily be open at one time so I am trying to use an Iif statement to check if the form is open. I can't seem to figure out the function to check if the form is open. I am looking for something along these lines:
Text box1
=iif([Forms]![Jobslist] = closed,"",[Forms]![Jobslist]![Docketnumber]
What i need to figure out is what to used instead of "= closed".
I have a query that shows banned users (I work in a school). When a student's ban has ended, a tick box is checked in a form linked to tblBannedUsers to show they are no longer banned.
The query itself simply queries all records in tblBannedUsers with a username field (UserID) taking search criteria from a box on a form.
However, I want to filter out the students that are no longer banned (those with a tick in the checkbox). To do this, I thought it would be a simple case of editing the query, and in the Ban Lifted field criteria, use =False to say I only want those records with a tick.
This doesn't work and I still get all records given the combo box filter (which are just filtering for a username...if I leave it blank it gives all records via Is Null).
What should I be putting in the criteria to filter out those records with a ticked checkbox?
Thanks,
Steve Swallow
EDIT: I've just done a test query and <B>No</B> is the criteria to use, but when I use this criteria in my query which also take data from a form's combo box it ignore the <B>No</No> criteria.
Is it possible to filter a forms records by using a boolean True/False field.
I want to show all current records for option 1, Expired records for option 2, and all records for option 3. The form is based on 'tblMembers' which has a field [Expired] which is a boolean yes/no field formatted to true/false.
There are around 100,000 records to update. Would a SQL Statement be more efficient?
It is a local table being used to sum up the results of a handful of rules.
The columns can only hold True or False (datatype)
If and only if all columns are True - then true
MyRow T T T T T T T T T T - Sum in next column is T
MyRow T T T T T T F T T T - Sum in next column is F
Speed is very important. The Recordset for a single row is still open on the Currrent Record since the Update just finished.
Code:
RS_RE_1SegStatusProfiled.Fields("Total") = (RS_RE_1SegStatusProfiled.Fields("RE_1") AND CStr(RS_RE_1SegStatusProfiled.Fields("RE_2") AND (RS_RE_1SegStatusProfiled.Fields("RE_3") ' and so on
My guess is that since the recordset is open to the current record on a local table, it will be efficient to just re-read all of the values and And them together.
Since I have code writing to each record, I could also go through all the extra assignment of a local variable.
I'm really not sure how to go about this. I'm creating a course booking system and when creating a booking I need to check for current bookings with the same employee and course id's (i.e. the employee is already booked on the course). The query takes the employee and course id's from a form, and is initialised when the 'book' button is pressed. It correctly selects if the person is already booked on the course but I want the query to return a value to the form i.e. if it returns null/false then the booking can be created but if it returns a record/true then the booking already exists and a message box can be displayed.
I'm not sure if I'm going about this the right way, can anyone suggest how this can be done as described above or suggest a better way of doing the task?
I have a form that shows the records found in a query if the completed tick box is false. this is fine, but i have also put the tick box on the form, and wish the user to tick it when they are done how ever they, get a beeping error and wont let you change it to true. Can anyone suggest the resolutoin for this.
View 2 Replies View RelatedI want to create an opion group with two rad buttons in it. The values of those button wont be values but as true or false in order to use it in another text box to performa calculations. EX.
=IIf([radNew],"Hello",IIf([radUsed],IIf([txtAgeofCar]<184,[txtExciseinTotal]=Null,IIf([txtAgeofCar] Between 185 And 365,[txtExciseinTotal]*(-0.15),IIf([txtAgeofCar] Between 366 And 1095,[txtExciseinTotal]*(-0.2),IIf([txtAgeofCar] Between 1096 And 1825,[txtExciseinTotal]*(0),IIf([txtAgeofCar]>1825,[txtExciseinTotal]*(0.25))))))))
As you can see radNew and radUsed are the Options Buttons. Its not working in an option group.
Thanks in advance
Hi all,
My client has an Access database where the value of a checkbox is stored in a field called Exclude_PropCount as -1 or 0. I am trying to get this form working online, but have been unable to successfully store this value in the db. I have set up a simple page to test it, and my relevant code is this:
sql_save = "INSERT INTO HVM_Data (VC, Exclude_PropCount) VALUES ('a9', '-1')"
con.Execute sql_save
set duplicateVC1 = db.Execute("SELECT Exclude_PropCount FROM HVM_Data WHERE VC = 'a9'")
response.write duplicateVC1("Exclude_PropCount")
But no matter whether I have '-1' or '0' in the INSERT statement, the response.write line always returns "False". And of course I've tried inserting "true" and "false", but it only accepts an integer.
As exceptionally bad timing would have it, my server is slightly fubar and I can't download the database to my PC to see what's actually being stored there, but looking at the above code, do you see anything I'm doing inherently *wrong*? This is my first time with checkboxes so I won't be surprised if that's the case. Hints?
Thanks!
Can make a column show true or false in a table when two other columns in the table match each other? I think the statement would be like this:
If([Column1] = [Column2], True, False)
The only problem I am having is that I don't know if it can work in a table or does it just have to be in a query?
I have a table that consist of pricing for different types of products:
Table name: Costs
ID TYPE EastNew EastRenew WestNew WestRenew
1 500 4100 1000 4400 900
2 501 4100 1000 4400 900
3 600 3400 900 4600 1200
4 700 3700 1300 4900 3300
I have a form that consist of many fields that the user needs to manually input data. 3 fields on that form are the criteria i need to determine which pricing to use back on the table. The first field, which name is LTYPE, is a combobox that the user needs to choose as its type (i.e 500,501,600,700). The second field, which name is EastCoast, is a checkbox (Yes/No) that tells me if it's East Coast (East = yes and West = No). The third field, which name is NewRenewal, is a combobox that the user chooses NEW or Renewal).
Example 1, if the user chooses type 501, checkbox is YES for East, Product is NEW. Then the pricing is $4,100
Example 2, if the user chooses type 700, checkbox is unchecked for NO (which is West), Product is Renewal. Then pricing is $3,300
I would like the unbound field to auto determine the pricing based on the 3 criterias chosen. I read around the forums that Dlookup would be the function for this, however, i tried many times but it did not work.
I have created my tables and form and am now trying to run reports to organize the data. I have figured out how to group the individuals by group and treatment, but can't figure out how exclude individuals from the final list if they are already in another. As background, some of the individuals are eventually excluded from the experiment, though I keep the initial data. When the exclude individual checkbox is checked ("True" on the report) I do not want the individual to be listed in the "False" list, even though there are entries for that individual when that checkbox wasn't checked (when it was "True"). This is so I can get an idea of the current totals in each group.
Implant Period
>Treatment
>>Exclude individual?
>>>Individual ID
I feel like this should be a fairly simple task, but I cannot figure it out... Maybe there is coding to exclude individuals from the "False" list if they are already listed in the "True" list?
I have a query with the following criteria in one of the fields:
>=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom())
fom is a function for first of the current month. I need this query to be specific to what month it is when its ran so i want to only have this criteria if the month is > = october. If it isnt October or greater, i want the criteria to reflect this.
>=DateAdd("m",-12,fom()) And <=fom()
Which also works by itself. But when i add it to an iif statement it always produces no results. Below is the iif statement.
Iif(month(date())>=10, >=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom()),>=DateAdd("m",-12,fom()) And <=fom())
I have also added the column name to each expression and it still doesnt produce any results.
This should be really simple, but I am stumbling on the criteria. I have a combo box which returns "Y" or "N". I'm using this value as criteria for a field called [Planned=Y/N]. This field stores either a "Y" or a "N" to indicate that a network outage was planned or not. If the combo box is "Y" I want to return all values(Y and N). If the combo box is "N" I only want to return values of "N". I've tried the following in the criteria without the desired affect:
IIf([Forms]![frmOutagemenu]![cboflag]="Y","","N") - only returns records when "N" is selected.
IIf([Forms]![frmOutagemenu]![cboflag]="Y",null,"N") - only returns records when "N" is selected.
IIf([Forms]![frmOutagemenu]![cboflag]="Y",In("Y","N"),"N") - too complicated for Access to decode.
Is there another way to return nothing for the criteria when "Y" is selected?
Hi, the syntax is of iif is that iif(case, true, false) right.
In my case I have role_ID to filter so my iif statement is something like
iif([role id] = "1", "2" or "3")
But it does not work, I don't know why
iif([role id] = "1", "2")
It works. So I think OR statement is something wrong.What should I do in this case?
Can I generate an IIf statement with two-true values? I have these two statements but don't know how to combine them:
IIf((Weekday(date);1)=vbMonday or vbTuesday or vbWednesday or vbThursday or vbFriday;x;””)
IIf((Weekday(date);1)=vbSaturday or vbSunday;y;””)
I have at field with a date and will like the true statement to be “x” if the data is Monday-Friday and “y” if the date are a Saturday or Sunday and if the date field is blank, I want to have a blank field here as well.
I have tried:
IIf((Weekday(date);1)=vbMonday or vbTuesday or vbWednesday or vbThursday or vbFriday;x;y)
But it returns y in fields that should be blank.
I have an AfterUpdate event where I want a list box to be populated based on three different criteria based on a table in my database
1. Complete = False AND
2. Supplier on form = supplier in table AND
3. Status in table = "SUPPLIER_RFQ FOLLOW-UP" OR "SUPPLIER_RE-RFQ TO OTHER SUPPLIER"
I am having trouble with the last OR statement criteria, i cannot get this to return values correctly. Here is my code:
Me.cboSupplier.RowSource = "SELECT DISTINCT [Consolidated_Master_Req_Pool].[RFQ Contact] " & _
"FROM Consolidated_Master_Req_Pool " & _
"WHERE consolidated_master_req_pool.Complete = FALSE AND [Consolidated_Master_Req_Pool].[RFQ Supplier] = '" & Nz(Me.cboStatusRFQ) & "' And [consolidated_master_req_pool.Status] = '" & "SUPPLIER_RFQ FOLLOW-UP" & "' OR [consolidated_master_req_pool.Status] = '" & "SUPPLIER_RE-RFQ OTHER SUPPLIER" & "'" & _
"ORDER BY [Consolidated_Master_Req_Pool].[RFQ Contact];"