General :: Display Listbox Record When Double Click On Item
Sep 26, 2012
I currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'" If Not Me.RecordsetClone.NoMatch Then Me.Bookmark = Me.RecordsetClone.Bookmark Else MsgBox "Could not locate [" & Me![QuickSearch] & "]" End If
Is it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer CandID = Me.List4.Column(0) DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
I have a list of companies in a table which Is being accessed through a list box. I wanted the user to be able to double-click on the name of a company from that long list and then for that selection to show up on an adjacent shorter list box which in turn will be used for a search. How can I do this? Another option would be to drag and drop the name from on list to another.
This is probably failry simple if you know what you're doing, but I don't know what I'm doing....
I have a form (Purchase Orders) and on that form there is a search button to allow the user to search the customers table by customer name. When the user clicks the search button a search form opens and the search results (customer number, first name, last name) populate a list box named "lstCustInfo". How can I set the list box double click event to return the customer number, first name and last name to the Purchase Orders form? To make it even more complex I would like to return the data in two fields: customer number and LastName, FirstName. The problem with returning the results in two fields though is that I need to be able to break it into three to save it in the customers table because the table has a place for Customer Number, First Name and Last name.
Does anyone have any suggestions? Is there a better way to do this than returning 2 fields and having to break it back into 3 to store?
First, I want to say I would REALLY appreciate any help I could get with this problem. Let me lay out the details.
I DO NOT, DO NOT, DO NOT know the first thing about programming for ms access. I am an absolute novice, no exaggeration at all. I was a liberal arts major in school!!!!!
Here's the thing: being adventurous and all, about 2 years ago a co-worker and I were fiddling with databases to try and help out our employer keep track of dispatching his equipment for his business. With a little too much time on our hands, before we knew it, our database became fairly complicated, for such novices. A kind gentleman on this forum did us an enormous favor, and programmed a search form for our database. you could enter any or all of the id #'s for various equipment, and it would pop up in a list box. Double-clicking the listbox would open the particular record you were looking for.
Fast-forwarding to now, I'm trying to create another database to keep track of our inventory while while various equipment moves in and out of our yard. I have tried using the old search form as a foundation to create a similar search form for this db. I think I actually have it (kind-of) working! You type in a container number, and the record should pop up. which is a miracle all its own.
problem is, is that when you doubleclick the selection in the list box, I receive the following error:
I don't know what to do! I'm sure it must be something painfully simple or obvious, but I'm really stuck & would appreciate any help.
Also, I would really appreciate any advice on this: I'd like to also be able to search by chassis # in addition to container number, but i don't know how to do it. no big deal, though. THANKS SO MUCH!!
p.s., I've attached the db. please let me know if you can open it ok
the user searches records and they are filtered..http://www.londonheathrowcars.com/searchform.jpghttp://www.londonheathrowcars.com/searchquery.jpgand when they double click i want the record to open in this form..http://www.londonheathrowcars.com/showform.jpghttp://www.londonheathrowcars.com/showquery.jpgtrying to put this code on my listbox but gettin the openform cancelled 2501 error on the bold line.. anyone see why?Private Sub QuickSearch_DblClick(Cancel As Integer)Forms("searchform").SetFocusForms("searchform").RecordSource = vbNullStringDoCmd.OpenForm "showform", , , "[jobref] = " & Me![QuickSearch].Column(0)End Subnote:on the search form.. the form has no record source.. the listbox has the record source of the searchquery..also on the show form.. the form has the record source of the showquery.
I have an access form which i have turned of menus, navigation and shift key. What I am looking for is to have buttons on my form to allow users to create and delete queries from my form. I already have a listbox that shows all the queries and runs them when a user double click on them.The codes needs to run in access 2007-2013 in both 32 & 64 bit versions.
I'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:
I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.
This is the code used to populate the listbox:
Private Sub FilterTypeList() Dim strRS As String ' Filter the list box appropriately based on the combo box selection(s) strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"
[Code] ....
What is the code to open a form with the double-clicked record's fields, as described above?
In the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database. This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
I know how to do an action on doubleclick or mouseover but I want some simple text to come up, possibly with a white background behind it that has some details about the specific production number that the user is clicking on. Is there something like this? I tried a dialog but it brings up an ugly form, I just want the text or something simple. Can this be done?
Hoping someone can help me with this. I have a form (one-side) with a bound continuous subform (many-side). I have a second unbound subform, also continuous, which is used as a reference only (no data entry) to select the record to be added to the bound subform. Is it possible to set it up so that, when the user double clicks on the pk from the unbound subform it adds that pk as a new record on the bound subform?
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer) DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location 1234..........1............Paint .....Address A 1234..........2............Electric...Address B 1234..........3............Floor..... Address C
greetings all..i have tried to use an old database template i had and re-work it for my new client..basically the user types a ref no into a search box.. there is a text list that is narrowed down to the chosen item as they user types..then they double click on the item in the list and it opens in the main form..this is how it should work.. i think im pretty close but im gettin a few problems.. i would be very grateful if someone could have a look at it...the form i want all this to happen on is called MAINFORM.. the database is very simple.. one table.. one query.. thats it..thanks..
I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).
I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.
I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.
For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.
I am trying to double click on a subform field called Address which would open a form frmEditWorkItem (based on a query qryWorkItem) then to be able to carry out edits for the current record.
I have a Contacts subform and would like to be able to double click to fill addresses, and details from the previous row...every person in our database even those living at the same address needs thier own record.. and since we only need to fill up to 5 records and review them, double clicking on the first name to fill up the next row with the previous addres phone number ect would be grand.
I am assuming we could fill out the new Full Name and double click on it to get the previous record filled to the new one. Don't really want to work with a query unless needed, but I have a little vba understanding.. how do I code this to make it work?
I have a attached a sample database to show you my problem the form "stores1" is the navigation form . in side that I have 2 subforms.
the first form I have a macro in it that when you double click it ( say the first line ) the stocklist file will appear on the part that I double clicked on IE 5096B02066 this did work and does work in the old access I have but now I put these forms into the navigation form I cannot get it to work,
I am having this problem on many forms even if I try to put a text box into the navigation window that ref a field on one of the subforms.
I have a list of incidents in my Incidents Management Database. It comes up as a grid view when users open the database.
This is what it looks loke (paste the following into address bar of your browser. lh5.google.com.au/snehal.dabhi/R8oc22J_RfI/AAAAAAAABz0/bbIkCzg5whk/image001.png
I want particular incident to open in a form when users double click on any particular incident from the list above. For example double clicking on the first incident (dated 1/03/2008 in the list above) should open the form below with THAT PERTICULAR incident. And double clicking on 22nd incident should open the following form with 22nd incident loaded, so users can edit that incident
please Paste the following into your browser to see the image. lh6.google.com.au/snehal.dabhi/R8oc3GJ_RgI/AAAAAAAABz8/vGSjfr5rZ10/image003.png?imgmax=640
Any detailed help is much appreciated. – I am too new to understand macros and vba. Thanks!
Is it possible to once you have run a query be able to somehow double click on the results in order to either go to original record or see more details? Similar to "show details" in excel?
I have made some queries that are working well however they are specific in nature and once found display a list of results. I have left a field that uniquely identify them and are after a quick way to view the details of the results from the query rather than take the ID# and manually search the original table.