General :: ELookup With Multiple Criteria - Data Type Mismatch
Apr 17, 2013
I'm trying to use the following expression:
=IIf(ELookUp("EventDate","qsfrmEvents","[EventID] = 8 And [fkClaimID] = ' & [Forms].[frmClaim].[txtClaimID]'")>0,True,False)
But I'm getting a data type mismatch. txtClaimID is numeric, but if I take out the single quotes I get a syntax error.
View Replies
ADVERTISEMENT
Jun 23, 2012
"Data type mismatch in criteria expression" Error 3464
I get this on the <DoCmd.OpenForm "frmWrittenStatements"> in my code.
How on earth are any criteria attached to this?
View 2 Replies
View Related
Jul 18, 2005
I am getting the error "Data type mismatch in criteria expression" when I put sorting on the following field in a query:
3 Month Date: DateAdd("m",+3,[Current Date])
If I remove sorting the query works fine. When I add sorting to this column in the query design grid, I get the error message.
Any ideas?
Thanks,
BJS
View 8 Replies
View Related
Apr 11, 2006
can someone tell me why I getting this error when I try and run this query:
select distinct case_id
from NOLDBA_RPT_CASE_CHG_IND G
where
sys_curr_date between '01/01/2005' and '12/31/2005'
and aft_case_status = 'O'
and not exists
( select 1 from NOLDBA_RPT_CASE_CHG_IND X
where X.case_id = G.case_id
and X.aft_case_status = 'C'
and X.sys_curr_date = G.sys_curr_date )
Thanks
View 4 Replies
View Related
Nov 4, 2006
Query1:
Src: Table1 joined Table2
ID (Type Text)
Title (Type Text)
Remarks(Type Text)
Formatted: FormatTitle([title],[Remarks])
Expr1: InStrRev([Formatted], "~")
public functionFormatTitle(ByVal sTitle as String, ByVal sRemarks as String) as String
'do process code here very complicated an long, but works find in the end
'creates a Multi-String delimited by | (pipe)
end function
The above works, and Expr1 does give an accurate value for the position of a "~" (tilde) in the string Created by the FormatTitle() function.
However, If I put a Criteria >0 on Expr1 it asks for the value of the [Formatted] field as if it was a parameter. If I put a criteria for Formatted: Like "*~*" I get a Data Type Mismatch in Query Criteria
Query2:
Src: Query1
Title (Type Text)
Remarks (Type Text)
Formatted(Type Text)
Exr1 (Type Number) criteria >0
This Query Also produces the Data Type Mismatch in Query Criteria
pardon me, but WTF? If it isn't a STring, than InStrRev() should produce an error, not an accurate response, and if InStrRev() produces a number why can't i compare it to 0 (zero)? This is indubitably messed up that I'm getting this error. There is no data type mismatch, on either of these tests, one is a string and I criteria-limit it by a string operation, the other is a number and I criteria limit it by a number, WHAT IS GOING ON!!!
Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner - The Frustratedly Confused
View 2 Replies
View Related
Apr 3, 2008
Hi All
I would be much obliged if someone would help me here.
I have the following code which takes a value from a combobox and uses it in an sql statment to find a certain record and then it populates the GUI with that recordset , however I get the following error "Data type mismatch in criteria expression"
Please help
CODE:
Private Sub cmdSearch_Click()
Dim sql As String
Dim rsUpdate As New ADODB.Recordset
On Error GoTo DbError
sql = "SELECT * FROM ServiceReport WHERE CallReferenceNo= " & Me.cboSearchRef.Value
rsUpdate.CursorType = adOpenDynamic
rsUpdate.LockType = adLockOptimistic
rsUpdate.Open sql, remoteConnection, , , adCmdText
If rsCategories.EOF = False Then
Me.txtDate = rsCategories!Date
Me.cboModel = rsCategories!Equipment
Me.txtHK = rsCategories!HongKongFaultNo
Me.txtInvoice = rsCategories!InvoiceNo
Me.txtRef = rsCategories!CallReferenceNo
Me.txtSerial = rsCategories!SerialNo
Me.txtSite = rsCategories!Site
Me.cboClient = rsCategories!Client
Me.chkCompleted = rsCategories!Completed
Me.chkHK = rsCategories!HK
Me.chkRepaired = rsCategories!Repaired
Me.chkSpares = rsCategories!Spares
Me.chkTested = rsCategories!Tested
Me.cldComp = rsCategories!CompletedDate
Me.cldExp = rsCategories!ExpectedDate
End If
MsgBox "Record Found.", vbInformation
rsCategories.Close
SetRecordset
Exit Sub
DbError:
MsgBox "There was a freakin error finding that record, go figure." & Err.Number & ", " & Err.Description
End Sub
THANKS
View 3 Replies
View Related
Feb 8, 2006
hi guys, here is my problem.the error in the title appears when i try to update a record.the field MODON in the table is defined as a short date and an input date 00/00/0000.Here is the code where i insert and update the records: Option Compare DatabaseOption ExplicitPrivate Sub Command4_Click()On Error GoTo Err_Command4_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "frmCalendar" DoCmd.OpenForm "frmCalendar", , , , , acDialog, Me.name & ";modon"Exit_Command4_Click: Exit SubErr_Command4_Click: MsgBox Err.description Resume Exit_Command4_Click End SubPrivate Sub Command15_Click()Dim str1 As DateOn Error GoTo Err_Command15_Click 'DoCmd.SetWarnings False If DCount("[comment]", "comments", "[change_id]=" & Me.Task_Num & "") = 0 Then MsgBox "insert" DoCmd.RunSQL "insert into [comments] (change_id,modon,comment,modby,modif) values (" & Me.Task_Num.Value & ",'" & Me.modon.Value & "','" & Me.Text10.Value & "','" & Forms!Login!username1 & "','" & Now() & "');" DoCmd.SetWarnings True Else MsgBox "update" MsgBox DLookup("[comment]", "comments", "[modon]='" & CStr(Me.modon.Value) & "'") DoCmd.RunSQL "update [comments] set comment='" & Me.Text10.Value & "' where change_id=" & Me.Task_Num & " and [modon]='" & Format(str1, "dd/mm/yyyy") & "';" DoCmd.RunSQL "update [comments] set modby='" & Forms!Login!username1 & "' where change_id=" & Me.Task_Num & " and [modon]='" & Me.modon.Value & "';" DoCmd.RunSQL "update [comments] set modif='" & Now() & "' where change_id=" & Me.Task_Num & " and [modon]='" & Me.modon.Value & "';" End If DoCmd.SetWarnings True Exit_Command15_Click: Exit SubErr_Command15_Click: MsgBox Err.description Resume Exit_Command15_Click End SubPrivate Sub Command16_Click()On Error GoTo Err_Command16_Click DoCmd.CloseExit_Command16_Click: Exit SubErr_Command16_Click: MsgBox Err.description Resume Exit_Command16_Click End SubPrivate Sub Command4_Exit(Cancel As Integer) If IsEmpty(Me.modon) Then MsgBox "Please, select a date for the minute" Me.modon.SetFocus Else Me.Task_Num.Visible = True End IfEnd SubPrivate Sub Form_Load() Me.Text13.Visible = False Me.Text10.Visible = False Me.Label12.Visible = False Me.Label9.Visible = False Me.Task_Num.Visible = FalseEnd SubPrivate Sub task_num_AfterUpdate() If IsEmpty(Me.Task_Num) Then MsgBox "Please, select a task Number" Me.Task_Num.SetFocus Else Me.Text13.Visible = True Me.Text10.Visible = True Me.Label12.Visible = True Me.Label9.Visible = True Me.Text13 = DLookup("[description]", "newchange", "[change_id]=" & Me.Task_Num & "") Me.text10 = DLookup("[comment]", "comments", "[change_id]=" & Task_Num & " and [modon]='" & Me.modon.value & "'") End IfEnd Subthx in advance....
View 2 Replies
View Related
Feb 26, 2006
I am trying to set a recordset, and I keep getting this data type mismatch error, but I cannot see what the problem is. Here's my code:
Set rstAccounts = dtbCurrent.CreateQueryDef("", "SELECT [Account ID], [Balance] FROM tblAccounts WHERE [Account ID]='" & txtAccountID.Value & "';").OpenRecordset
txt.AccountID.Value is 1, and when I hard code the value as 1 it works, so I'm not sure what the problem is. I've tried using CStr() to convert it to a string, CInt() to convert it to a integer (even though it already is one), with using both quotes, with only double quotes, and with only single quotes. It's driving me crazy, because i'm sure it's something really simple, but I'm not sure what else to try.
Thanks in advance.
View 4 Replies
View Related
Nov 8, 2014
The error I'm getting is "data type mismatch in criteria expression".
Private Sub BtnAddBooking_Click()
Dim CustomerID As String
Dim StaffID As String
Dim intPos As Integer
Dim strSQL As String
Dim strSQL2 As String
Dim BathValue As Integer
Dim rst As DAO.Recordset
Dim RemainingBookingExists As String
Dim RemainingBaths As Integer
Dim RemainingBathsExists As String
[code]....
View 2 Replies
View Related
Aug 8, 2013
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
View 12 Replies
View Related
Apr 29, 2014
I have a query which runs fine until I set a criteria (of True) in the field
Code:
chase_it: prevwd([practice_bacs_submission_date])<Date()
So without the criteria, I have
Code:
SELECT prevwd([practice_bacs_submission_date])<Date() AS chase_it, practice_bacs.practice_bacs_submission_date
FROM practice_bacs
WHERE (((practice_bacs.practice_bacs_submission_date)>#1/31/2013#));
and in the query results I see 0 and -1 as expected for the 'chase_it' expression BUT When I add True (or -1, or 0) as a criteria for 'chase_it', I get the "Data type mismatch in criteria expression" error.So the sql that fails is
Code:
SELECT prevwd([practice_bacs_submission_date])<Date() AS chase_it, practice_bacs.practice_bacs_submission_date
FROM practice_bacs
WHERE (((prevwd([practice_bacs_submission_date])<Date())=True) AND ((practice_bacs.practice_bacs_submission_date)>#1/31/2013#));
In case it's relevant, my function prevwd is:
Code:
Function prevwd(dt As Date) As Date
10 On Error GoTo prevwd_Error
20 dt = dt - 1
30 While Weekday([dt]) = 1 Or Weekday([dt]) = 7 Or IsBankHoliday(dt)
[code]...
and this function is used extensively and always works perfectly. I have tried using DateAdd instead of dt = dt - 1, but that made no difference.
View 14 Replies
View Related
Nov 22, 2011
I am creating a simple query in a farm audit database.
In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?
View 2 Replies
View Related
Jan 30, 2008
Hi,
I am trying to insert a text box value into a text field value in a table. I am checking to see if the value is already in the table but come across an error on the second click. The first click enters the number, and the second click gets error. I know where the error is but I'm not sure why or how to fix it.
Code:Dim db As DAO.DatabaseDim rs As DAO.RecordsetSet db = CurrentDb()Set rs = CurrentDb.OpenRecordset("CVHOLD", dbOpenDynaset)If Not rs.BOF Then rs.MoveFirstrs.FindFirst "[Batch Number] = " & Me![Batch Number]'Error here on second passIf (rs.EOF) Then 'Seems to insert new record properly 'No Batch Number in Table yet. rs.AddNew rs("Batch Number") = Me![Batch Number] rs("Date Closed") = Now() rs.Update rs.CloseElse 'never enters, jumps to Error label 'Batch already listed in table MsgBox ("Batch already in table. Updating Closed date")End IfErr_cmdHoldStatus_Click: MsgBox Err.Description
This is what the debugger outputs for my values
Code:Me![Batch Number] : 81697 : Object/Textbox rs("Batch Number") : "81697" : Object/Field rs.BOF : False : Boolean rs.EOF : False : Boolean
View 1 Replies
View Related
Jul 31, 2005
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
View 1 Replies
View Related
Aug 11, 2014
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
View 5 Replies
View Related
May 16, 2013
I am working on a fairly ancient manufacturing database that identifies items using a combination of letters and numbers. The usual format is to have a letter (which suggests something about the item type) followed by a sequence of numbers.
I am trying to write a query that looks up all the records beginning with a prefix or arbitrary length, strips away the text, and finds the highest number.
Code:
SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND IsNumeric(Right(LocalID,Len(LocalID) - 1)=True)
This query produces the error given in the title of this thread, whilst the following works:
Code:
SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND IsNumeric(Right(LocalID,5)=True)
This related query also works and shows a load of -1s and 0s correctly
Code:
SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix,
IsNumeric(Right(LocalID,Len(LocalID) - 1)=True) As Alias
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND
But once again shows the error message when I try to filter the field Alias to -1 or 0 only through the right-click menu.I have tried piping Len(LocalID)-1 through CLng, CInt, Int, CDbl and CSng; this changes the error to 'Invalid Use Of Null' I have also tried removing the '=True' from the IsNumeric() term.
View 2 Replies
View Related
Jul 25, 2013
I have an update query for tGLCashAccount where it adds a value from another table with the BeginningBalance to arrive at CurrentBalance.
Here's what it looks like in design view:
Field: CurrentBalance
Table: tGLCashAcct
Update to: [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
Here is SQL code:
UPDATE tGLCashAcct, tMakeNewCashBal SET tGLCashAcct.CurrentBalance = [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
WHERE (((tGLCashAcct.GLCashAcctID)="102"));
I get the error: data type mismatch in criteria expression when I run it.
View 3 Replies
View Related
Oct 17, 2006
I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));
I have spent so much time onthis already and i am sick of it :mad:
Attached is my db. Please help me out here.
View 2 Replies
View Related
Aug 24, 2015
I want to delete certain records based on the selected date. However, I come across with this is error - Run time error '3464' (Data type mismatch in criteria expression).This part is highlighted in yellow. I even used the debug.print to test out if the sql statement is executed properly.
Code:
DoCmd.RunSQL DelSummarySQL
Here is my full code
Code:
Private Sub cmd_Delete_Click()
Dim DelSummarySQL As String
Dim StartRange As Date
[code]...
View 2 Replies
View Related
Aug 28, 2013
Some background: I am making a form at work for a coworker with cascading combo boxes where she can select a Customer, then Platform Description, then Period, then Year. I used VBA code for these and they all seem to be working, except the Year.
Code:
Private Sub Form_Load()
On Error Resume Next
CustomerCB.SetFocus
[Code].....
I am pulling a table from Excel into Access (SD0039DA_T2), then I have used a delete and append query to populate a 2nd table (SD0039DA_T). I did this 2nd table because the first table was slowing down all of Access because it's such a large file directly linked to Excel.
The only real difference between the two tables is I added another column to SD0039DA_T called BillingYear. This is the Year in the cascading comboboxes/listboxes I am having trouble with. In the append query, I used ...
Code:
BillingYear: Right([SD0039DA_T2]![Billing Date],4)
...appended to BillingYear. I want just the year (YYYY), not the whole billing date from the original table (MM/DD/YYYY).
So I'm thinking the problem is with the YearCB section of the VBA code or something to do with my tables?
View 3 Replies
View Related
Jan 10, 2007
Ive been working at this problem for a while now and I can't figure it out. I have a table full of Work Orders, and on the form for inputing the Work Order data, there is a field for the date that the WO was received, and the date it is wanted. There is also a field that tells if this was a rush job (Yes/No) field.
I need to make a query that will grab all the rush jobs, and sort by how many days were between the date received and date wanted. This would be easy, just subtracting the dates, but I need to have it not include weekends and holidays. I found an algorithm to do that and it seems to work well. However, when I run the query, it gives me a "Data type mismatch in criteria expression." error. At this point, to debug it, I put in a message box to see if it processes any entries. It does process them one at a time, but once it gets to a certain point I get that error. I have checked all the dates, making sure they are all valid and they are. I'm just really stumped here. Here is the code for my query:
SELECT [Usable Orders].[AI Number], [Usable Orders].[District Name], [Usable Orders].[CCM Name], [Usable Orders].[8255 Received], [Usable Orders].[Date Wanted], [Usable Orders].Rush, WorkingDays2([8255 Received],[Date Wanted],[AI Number]) AS [Working Days]
FROM [Usable Orders]
GROUP BY [Usable Orders].[AI Number], [Usable Orders].[District Name], [Usable Orders].[CCM Name], [Usable Orders].[8255 Received], [Usable Orders].[Date Wanted], [Usable Orders].Rush
HAVING ((([Usable Orders].Rush)="Yes") AND ((WorkingDays2([8255 Received],[Date Wanted],[AI Number]))<=10));
and here is the code for my WorkingDays2 (counts all working days excluding holidays) the AINumber field I put in for debugging purposes to see which entries were being processed.
Public Function WorkingDays2(StartDate As Date, EndDate As Date, AINumber As String) As Integer
'................................................. ...................
' Name: WorkingDays2
' Inputs: StartDate As Date
' EndDate As Date
' Returns: Integer
' Author: Arvin Meyer
' Date: May 5,2002
' Comment: Accepts two dates and returns the number of weekdays between them
' Note that this function has been modified to account for holidays. It requires a table
' named tblHolidays with a field named HolidayDate.
'................................................. ...................
On Error GoTo Err_WorkingDays2
Dim intCount As Integer
Dim rs As Object
Dim stSql As String
Dim con As Object
Dim Message As String
If StartDate > EndDate Then
MsgBox "Start Date is After End Date"
WorkingDays2 = -1
GoTo Exit_WorkingDays2
End If
stSql = "SELECT [HolidayDate] FROM tblHolidays"
'StartDate = StartDate + 1
'To count StartDate as the 1st day comment out the line above
intCount = 0
Set con = Application.CurrentProject.Connection
Set rs = CreateObject("ADODB.Recordset")
rs.Open stSql, con, 1 ' 1 = adOpenKeyset
'MsgBox "Today is " & Weekday(StartDate) & ", " & StartDate & "Opening AI Number is " & AINumber
Do While StartDate <= EndDate
rs.Find "[HolidayDate] = #" & StartDate & "#"
If Weekday(StartDate) <> vbSunday And Weekday(StartDate) <> vbSaturday Then
If rs.EOF Then
intCount = intCount + 1
' Message = Message & " and today is a work day."
End If
Else
' Message = Message & "and today is not a work day."
End If
' MsgBox Message
'rs.MoveNext
StartDate = StartDate + 1
Loop
'MsgBox "Closing AI Number " & AINumber & "Count is " & intCount
'MsgBox "After Loop count is " & intCount & " and today is " & StartDate
WorkingDays2 = intCount
'MsgBox "Date is " & StartDate & "AI Number is " & AINumber & " and there were " & intCount & " days."
Exit_WorkingDays2:
Exit Function
Err_WorkingDays2:
Select Case Err
Case Else
MsgBox Err.Description & "Start date is " & StartDate & "End Date is " & EndDate
Resume Exit_WorkingDays2
End Select
End Function
View 1 Replies
View Related
Sep 6, 2007
I don't understand why this won't work.
I have a date field in a table. The default value for this field is Date().
The data type is Date/Time
The field is called Import Date.
Here is what I am trying to do in a query:
Month Imported: DatePart('m', 'Import Date')
I am getting a data type mismatch, and I don't see how.
If I put this:
Month Imported: DatePart('m', Date())
It works fine.
View 8 Replies
View Related
Jan 23, 2008
I am querying results using Access 97(Yes its old and no my company is not willing to upgrade.....:confused:). Anyhow, I am connecting to a corporate database that has two tables I am querying that should be joined on one field (wmg.wmgtk01_tnk.sys_i = wmg.wmgwo04_halfleg_actl.tnk_sys_i). I am running into a problem with these fields because they have been defined differently by my IT department. The "sys_i" field is a NUMBER of length 5, while the "tnk_sys_i" field is a NUMBER of length 20. Is there a way that I can trick Access into joining these fields even though they do not match? I am currently getting a "Data Type Mismatch" error when I attempt to create this join.
Thanks in advance for your help!
View 3 Replies
View Related
Mar 1, 2005
I've been studying unbound for quite awhile and i've build to forms but i seem to get stumped with datatype mismatch. I've tried everything that i would possibly know. I guess i'm just to new in access to try this but it's the only thing that works for what i'm trying to do can some1 please provide me some assistance. I've attached both forms. YOUR HELP WILL BE GREATLY appreciated.
Now the problem, when adding or editing info i get datatype mismatch -21233 some number of that sort....
Thanks...
Eddie...
View 14 Replies
View Related
Aug 1, 2006
Dear All:
I am trying to print letters from access using a command button. It works well, but when I try to print the displayed record, I get "Data type mismatch in criteria expression".
The primary key is a 9-digit number where some have a leading zero. I have made this as text so I do not loose the leading zero.
Here is the code when the command button is pressed:
Private Sub Command1315_Click()
Dim strWhere As String
If Me.NewRecord Then 'Check there is a record to print
MsgBox "Select a record to print" _
, vbInformation, "Select a Record"
Else
'The Student ID Number is the name of the Primary Key
strWhere = "[STUDENT_ID] = " & Me.[STUDENT_ID]
DoCmd.OpenReport "HONORS_LETTER", acViewPreview, , strWhere
End If
End Sub
Thanks for all the help.
Dion
View 1 Replies
View Related
Jul 22, 2005
Hi,
I'm having some problems with a simple query and it's driving me nuts. The invoice numbers in our system have hyphens in them, and I'm trying to find invoice numbers whose part before the hyphen matches a number I enter. Here's my SQL:
SELECT dbo_NIHB_ClaimLog.InvoiceNum, Left([InvoiceNum],InStr([InvoiceNum],"-")-1) AS InvoiceNumLeft
FROM dbo_NIHB_ClaimLog
WHERE (((dbo_NIHB_ClaimLog.InvoiceNum) Is Not Null) AND ((Left([InvoiceNum],InStr([InvoiceNum],"-")-1))=23316));
I'm getting a "Data Type Mismatch In Criteria Expression" error, and I can't figure out why. I've wrapped a Clng() around the Left() function, but that doesn't help either.
Am I missing something here?
View 5 Replies
View Related