When user enter the data other than date field or when date field remain empty and user press the Add button, it is giving error.
(Error 3075)
Syntax Error in date in query expression '#'.
while same code is working for text field. but it is not working for date field.
If (Me.rdate) = "" Then
Exit Sub
End If
How to restrict the updation of a record while entering until a save button is pressed on the form ???????? is it possible without the vba ?
View 10 Replies View RelatedHere is my problem
In namefield_AfterUpdate, I check for duplicate name entries and notify the user if any are found - they are prompted as to whether the duplicate was accidental or intentional and continue working. This works fine for normal circumstances.
However, if the user updates namefield so that the value is a duplicate of an existing name in the database, but then presses Cancel (or Delete), then the namefield_AfterUpdate is fired and what button they pressed. The button Click code does not run first.
How can I tell if the user updated the name, but then realized they didn't want to save, and then clicked 'Cancel' (or any button) and the code should really skip the duplicate check validations/messages?
Running XP or Win7 with A2007
Right now on a form I have code that runs when the used DoubleClick on that field. Users want to have the code run when the EnterKey is pressed as well but when putting the code in the onEnter command line it would run the code when you tab thru the field.
View 2 Replies View RelatedIs it possible that once the command button "Send Cost Request" in red is pressed it will change to green?
View 3 Replies View RelatedI have an option group with 2 buttons in it, yes and no. It is set to default to No, but if someone hits Yes I want it to enable or turn on the next option group. Would just simply changing visible status disable it? Because I have a series of codes set up based on the second option group which read as:
Code:
Private Sub NumberOfAdditionalSites_Option1_GotFocus()
Me.AdditionalSitesLabel1.Visible = True
Me.AdditionalSitesText1.Visible = True
End Sub
[Code] .....
I do not want these to be visible if the initial option group is still set to no.
I have a form which displays some product details and a stock level. The subform below it allows entry of a quantity to issue and a control button to run a small macro, write a movement record to a stock movement table and then close the form. This works fine.
But the user can also cause the movement record to be written just by keying in a quantity and tabbing out. If this is done several times it writes several movement records and doesn't close the form. I want to ensure that record is only written when the command button is pressed.
Perhaps there is a more conventional or better way of achieving what I want but I can't think of it.
I have a form with a control for the user to enter some data and then two command buttons 'OK' and 'Cancel'
For the OnExit event in the control I have a procedure that check the user input and if incorrect, opens a message box with an error message asking the user to correct the data. It then cancels the event so the focus remains in the current control.
However if the user presses the 'Cancel' command button on the form to cancel & close the form, the OnExit event for the current control still fires and asks the user to correct the data.
In my code in the control, how can I recognise that the Cancel command button has been pressed, so I can cancel the OnExit event and close the form?
So what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies View RelatedI am using the funtion:
Clng([text field]) to convert a text field into a number so that I can link in a query. Because it is an informix database, I cannot change the underlying table format.
When I run the query, the data is showing "Error".
I tried changing the other table to text and linking but it doesn't seem to link properly because the query doesn't work.
Your advice appreciated.
I have a text field I need to convert to numbers. There are both empty and non empty fields. I then need to show the numbers like this "1.234" and a "*" in the empty fields.
I have tried to convert the fields with Cint, but I get an #Error in the empty fields.
Is there any way to solve this??
Thanks in advance..
I wish to use message boxes that pop up when certain options are chosen, that can either be immediately cleared by clicking the 'OK' button or that disappear by themselves after a short period (10 seconds in this case). After searching the net for various options, I found the following code:
Code:
Set objShell = CreateObject("Wscript.Shell")
intReturn = objShell.PopUp("Date of Birth updated", 10, "FYI", 64)
(The 64 displays an information symbol).The box is displayed correctly and the 'OK' button works fine, but the box does not automatically dismiss when nothing is pressed.
On a form I have a textbox with a data type of Date/Time. If the user has the cursor in that text box and types the letter "t", I want to automatically insert today's date. I also want them to have the option of manually typing in a date, i.e. 05/12/2001 or use the Date Picker "calendar" item. This is using Access 2010.
View 3 Replies View RelatedI am using the QBE grid and am writing a select query to select only records with an empty Date Closed Field. The Date Closed field is a Date/Time Field. I am using Access 2003. When I use in the criteria IsNull([DateClosed]) I do not get any records selected which have an empty Date Closed field, have I a bug? and if so please could anyone point me in the right direction.
View 4 Replies View RelatedI have an simple option group (3 options 1,2 and3!!)I am building a query where I need to display records whose option group field in the table is empty. I have tried:
field = Int(0)
field = ""
field = null
isempty(field)
do not work.
I have a query that is returning inaccurate "Date Completed" results. Here is the SQL:
PARAMETERS [Enter Start Date] Text ( 255 ), [Enter End Date] Text ( 255 );
SELECT DISTINCT [Qry BDM FA English Email Test Part 1].ADI_DISTRIBUTOR_ADVISOR, ADL_AAH_ADVISOR_ACTIVITY_HISTORY.AAH_DATE_COMPLETE D, [Qry BDM FA English Email Test Part 1].AGA_EMAIL, ADL_AAH_ADVISOR_ACTIVITY_HISTORY.AAH_EMP_ID, DateAdd("d",180,Date()) AS [Next Update],
[Code] .....
I created a database and I manage to split it into front end and backend. now I'm going to make an EXE of the front end.My question is when I open the front end, I need the database to be empty, and them create a button that will make the user select which project he wants to open (backend).I also need to create a button that will create a new empty backend and save it as a new project.
View 7 Replies View RelatedTo prevent duplicate records, I use multiple fields indexes, which worked fine until now. I learned that each "empty" fields are consider unique by Access, so not the best in an index to prevent duplicate records. I managed to have it worked using the default value property to give each "empty" records the same value.
Now my problem is that I have a date field which is optional, but I need to use it as a unique identifier in an index. I could again use a default value, but since it has to be a date, I find it confusing. I would rather have a default value of "No date specified" or "-" or even better, "". Unfortunately none of those works with date fields.
I've got to copy the value of field A so it appears in field B. Field B may be changed, but field A cannot be changed. What's the best code to put into my button to copy the value of field A into field B.
View 3 Replies View RelatedI have a date and time stamp in a Date/Time field of General Date format (3/1/2006 7:52:25 AM).
I wish to select query on the table's Date/Time field by date portion only (3/1/2006) and not include the time portion (7:52:25 AM) of the field.
Using this expression in the query's criteria - "Between [Enter Start Date: (MM/DD/YY Format)] And [End Date: (MM/DD/YY]" will not return the date ranges as desired without also typing in the full time string.
How can the date integer be parsed out and the query properly expression ed on the criteria field without using VB?
In VBA, how to compare date variable with date/time field from table, as when defined the data type in table, date/time option is the only choice for date data type even though I don't want the time portion.
View 13 Replies View RelatedIn a date field is it possible for a date that is in the future to be hi-lighted in a different colour.
E.g. todays date is 25/03/14
So anything with todays date or previous would stay in black
24/03/14
25/03/14
but anything from 26/03/14 forward would be in red
26/03/14
Then will change to black when the 26th comes.
What code would I use and how would I insert it into my Code to make a button on a form fill in the current date into [fieldname]???
I think I already know who is going to respond to this! ;)
Thanks! :D
I'm having a problem trying to update a date field from a button.
I have a form called Add_New_Domain which runs from a table called Domain_Names.
Within the form there is a field called Expiry_Date which tells me when the domain is set to expire. When I first create an entry I manually enter a date in here.
However, every year when the domain renews I would like to increase this date by exactly a year by clicking a button which is also on the form.
I have a vba code export a error message if the current date of a file is not correct.. I have tested the code it worked to send a error message to a error.txt file but he it doesn't look to the modified date
So instead of:
file1.txt (13-02-14)
Then
Send error message ("file not updated") to: Error.txt
IF NOT
no action requeried
This code does the following :
file1.txt (Modified date: 13-02-14)
Then
Send error message ("file not updated") to: Error.txt
file2.txt (Modified date: 14-02-14)
Then
Send error message ("file not updated") to: Error.txt
Code:
Sub CheckD()
Dim FSO As Object: Set FSO = CreateObject("Scripting.FileSystemObject")
Dim objFile As Object: Set objFile = FSO.GetFile("C:Users
ameDocumentsShow5621.txt")
If objFile.DateLastModified <> Date - 1 Then
[Code] .....
So also if it is the current date he send the error message to the error.txt file, it could be possible that i did something wrong.
i have a form which has as button that opens a query
how can i make it so that if there arent any results from the query then a error message will pop up saying "no results found" and the table dosent show?