General :: Excel Numeric Data To Be Imported As Text In MS Access
Aug 1, 2015
Attached in the ZIPPED file is an Excel spreadsheet.
Columns A is all numeric, and needs to be represented in access as a text field.
Column B is a mixed format of dates entered and in some instances only plain numeric. I need to import this column as is into a text field in access.
I tried importing the excel sheet, but the data gets changed.I tried to linked the Excel sheet but it also had an influence on the data.In both cases the influence of change is NOT throughout. Hence my need to get this spreadsheet into access as is.
View Replies
ADVERTISEMENT
Nov 9, 2006
Hi,
I have a table in Excel, and when I import the table in Access, some records from a specific field shows #Num! after importing, even before I imported the table, I selected the entire field in Excel and I Formated all cells to text.
The specific field hosts records in digit format[34222256], and sometime in mixed letter-digit format[M22228778], but are supposed to be as TEXT! After importing I see the first as #Num!, and the second as M22228778.
How can I get around this issue in Excel or Access.
Thank you!
View 6 Replies
View Related
Jan 12, 2006
I have imported an Excel spreadsheet into an Access database. In Excel, a line break in a cell is entered by ALT+Enter. After importing my spreadsheet, all my line breaks appear as "□" and the text all runs together (no line breaks) in the table. The "□"s are also printed in reports. I need a way to either (1) make the "□"s appear as line breaks (e.g., by changing some Access property) or to convert the "□"s to something that shows as a line break in an the Access table memo field (e.g., CNTRL+Enter). Can anyone tell me how to make this happen?
I've tried to copy/paste the "□" into the Find/Replace dialog, but nothing appears when I paste. I understand the memo field is unicode, but I have not been able to determine what the "□" character actually is. It is not the same as the only similar squared shaped character I find in the Arial character map (U+25A1: White Square). I can copy and paste the "□", if surrounded by some other text, e.g., "xxx□yyy", into a Notepad document and it shows up as "xxx□yyy". Pasting the same into a Word doc and I get
"xxx
yyy" with the line break properly displayed. I can copy and paste just the □ itself in Notepad.
View 5 Replies
View Related
Mar 4, 2008
Hello there,
In excel spreadsheet, when I eg type in a numeric column 10 1500 so on, I would column11 appear text such as one thounsand and five hundred. How can I convert this?
Would that be possible?
Thank you in advance
Cheers
View 1 Replies
View Related
Jan 6, 2014
I need to import a text file into access 10, the problem is as i understand it access has a db limit of 255 columns.
The text file is delimited by | symbols. As i tried to import, it shows me to have 267 columns and all the columns are unique and needs to be used for my work.
View 1 Replies
View Related
Oct 21, 2012
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
View 5 Replies
View Related
Mar 17, 2015
I have a table, which contains many fields, around 90. Out of these 90 Fields, around 40 will be imported from an Excel sheet, which has same headers as the 40 field names in my table, in which they have to get copied.
So when I import data, it copies them as new records, instead what I am looking at is, the records in Excel and in Access table has a Unique Key, so when I import data, matching with this unique key, the fields should be overwritten into those records from Excel, instead of adding new records.
E.g:
Say I have 2 records in my access:
ID(auto generated) Fab_name Issue_ID Location Remarks Data_1 Data_2 Data_3
1 Fab1 193 NY Bug OC DC MC
2 Fab2 641 DRS Error AC KC FC
Now when I am importing data from Excel with the following records:
Fab_name Issue_ID Location Remarks
Fab1 193 NY - GRM Solved
Fab2 641 DRS - SGP Forwarded
So when I import the above data into my Access from Excel, based on Issue ID, it should update the values of different fields that are imported from Excel, leaving other fields (data_1, Data_2, Data_3) as it is.
And I need this to be written as a macro, so that user just has to choose the file, which he has to import.
View 6 Replies
View Related
Mar 7, 2014
The access file has a lot of rows which do not show on the excel file. The added files in access either have a space before their names, an * before their names, or no name at all. I would attach the new access file but it does not show up on my windows 7 list of files on my computer. It only shows up as a new file on my access program.
View 3 Replies
View Related
Mar 1, 2012
Access Database 2010 is used to capture progress on accounts. We are able to perform remedies on multiple accounts in the field and would like to update the records in Access all at once (by batch) rather than one-by-one.
I would like to export specific records from Access into Excel, make the updates to the records in Excel, then import the changes back into Access. I am looking for the updated Excel spreadsheet to overwrite the existing data in Access for that particular record.
View 5 Replies
View Related
Oct 9, 2014
When I import a column from Excel into a new table in Access using the Docmd.transferspreadsheet function, Access automatically assigns a field name of "F1"; and if I try to import a range of columns (Eg A1:B10), then Access saves them into a table with 2 columns with field names "F1" and "F2". The table is created as part of the Docmd function, and so I don't have control over the field names.
Is this going to always be the case? Can I depend on Access to always use this naming convention? Because I am about to start writing more code that will depend on these field names.
View 6 Replies
View Related
Oct 30, 2014
i'm in the process of creating an Access database to import data in text files and then export the data as fixed width text files, this is now working fine
My next step is to be able to setup an "Archive" Table which will hold all the data i have imported across multiple import proceudres for the last 30 days, i then want to be able to "De-Dupe" any files i import against this to ensure i never load duplicate data.
View 1 Replies
View Related
Feb 12, 2013
"Att Mr/Mrs Vezi Your DEFAULTED account has been handed over to XXX. Payment DUE IMMEDIATELY Ref 1315519509. Tel 0009377500"
I need to extract the word "Ref " plus the number that follows it from the above string. The problem is that the word "Ref " is not always in the same place and the number following it is not always the same length. (ie it could look like "Ref 123456 " or "Ref 1234567 ") The only commonality between the records is that the number will always follow the word "Ref ".
View 1 Replies
View Related
Mar 14, 2007
Access 97 SR1
I am importing a file that has two numeric fields in it. I was asked to import as fixed length text fields with leading zeroes and no decimal point.
I am supposed to export the data in Csv format.
Source field from IBM iSeries DB: quantity is 15,3. Quantity source value is 9, requested text format of five characters 00009, the Csv result is 9. The field in Access is defined as Text 5 characters.
Source field from IBM iSeries DB: price is 17,4. Price source value is 1020.0000, requested text format of nine characters 000001020, the Csv result is 1200.00. The field in Access is defined as Text 9 characters.
Thanks,
Dave
View 1 Replies
View Related
May 5, 2013
i have access 2013 and when i try to export data to excel with "Analyze data in excel" when the file is open i excel i get this error message file error: some data may have been lost". (and a whole row has not been export)
i tried to fix this file with excel open and repair option and i click on "extract data" but then i got this message;
Excel attempted to recover your formulas and values, but some data may have been lost or corrupted.
Excel found errors that may cause some recovered data to be put in the wrong cells.
View 10 Replies
View Related
Oct 24, 2012
1. how to transform excel data to access
2. how to create run time application : i tried it to make accde but no luck T_T "
View 4 Replies
View Related
Sep 13, 2012
How can I import data from excel to access, i have a huge file more then 5000 entries in there....
View 1 Replies
View Related
Mar 11, 2014
I have a text field having data i-e HO-1, HO,2, ACW-25 and so on. The field name is nBadge_num and is Unique. The data in this field is sorted automatically like 1, 10, 11, 12, 13, 2, 3, 4, 5...because this is the text field.
The number on the form is automatically generated, when the user type HO- for example on field exit event. The last number will generate like HO-5.
Code for automatic number generation is:
Dim dbs As Database, rst As Recordset, Response
Set dbs = CurrentDb
Set rst = dbs.OpenRecordset("SELECT Max(Right([nBadge_Num],Len([nBadge_Num])-" & Len(Me.NBadge_Num) & ")) AS MaxNo " _
[Code]....
My problem is when the number is generated it give HO-5 instead of HO-14, How can I sort the numeric part of the field ?
View 2 Replies
View Related
Jul 27, 2014
I copy some information from a website and then paste/values into Excel. I noticed that some non-printing characters are copied to. Suppose I were to import this Excel spreadsheet into an Access table. Now I need to clean up/remove those non-printing characters. What is the best way to do this in Access?
I suppose I could set up a calculated column with =SUBSTITUTE([InvHours],char(160),"") as the formula, where InvHours is the field name containing the non-printing characters. But if I did this, then I would still retain the original field with the non-printing characters which would increase the size of the database. I don't think I could delete it because then the calculated column wouldn't work. So I would rather not pursue this option if possible.
Would it be possible to somehow run a macro that could automatically be triggered as soon as data is imported, and that macro would clip out the non-printing characters without having to copy anything to blank columns?
Or does Access have some built-in feature that could do this?
View 3 Replies
View Related
Dec 17, 2013
I have made a access database which captures new booking information and i then want to export this to a pre-existing excel doc which has formulas in which will work out how long it took my team to process it.
So my question really is to see if it possible to just keep adding data to an excel doc that i have created?
View 3 Replies
View Related
Sep 11, 2014
I have a excel file and want a button in the sheet which would transfer a certain range of data in a defined excel sheet to an existing access db table. How to do about doing that.
View 5 Replies
View Related
Sep 9, 2014
I am working on a project where I need to upload selected data from multiple sheets of an excel file. Here is an example of what I want.
1. I want to create a table in Access with around 10 columns
2. Column 1 should be populated with the date field found in A2 cell of sheet 1 of the excel file
3. Column 2-5 should be populated with the columns B2-E200 in sheet 2 of the excel file.
4. Columns 6-7 would be populated based on values from columns 1-2 of the table. Basically Column 6 should be Column 1 date plus 60 days.
5. Column 8-10 would be user generated after the excel is imported and the user should have the ability to attach around 5 files to each row.
View 5 Replies
View Related
Jul 17, 2015
I have an input box and wanted user just to input 7 digital data. However, I am afraid user may enter string data. Is there any way to check and ensure user can only input 7 digital data to that input box?
View 2 Replies
View Related
May 11, 2015
Is there a way to import data to Excel from Access without retaining the link ?
I have a table and two queries (from that table) that I wish to export to a specific (Templated) Excel file.
I want to send the data to the Excel file then be able to subsequently copy and paste and email the file without any data connections etc.
Alternatively : to export from Access to the templated excel file.
View 2 Replies
View Related
Nov 7, 2013
In Access column name is STKITEMNBR and data type is TEXT. 4/5 of data are numeric and 1/5 are alfa-numeric. One of data was 15E10 in Access, but was altered to 1.50E+11 when exporting out to Excel csv file. Because it was Stock Item Number it needed to stay the same as 15E10 in csv file.
View 14 Replies
View Related
Aug 9, 2013
Need importing just 1 column from excel file into vba !
View 1 Replies
View Related
Dec 18, 2013
I 'm downloading the excel data from the site and connecting it to access.
In excel the particular column (Time Taken) is in the format of "00:12:26".
After connecting it to access and appending it to the table, the format changed to "12:12:26", the first two digits changed to "12" and the remaining are as it is how it looks like in the excel. I need to change it to format what it looks like in the excel.
View 7 Replies
View Related