I split my db to front-end and back-end. 20 users are using the database. But now I have the problem: In my admin front-end db I created a new table and some reports to the table, but this new table I have only in my front-end db and it doesnot appeares in back-end db - so that other users has no data in hte report for the new table. How I can create new table to be in back-and table too?
View RepliesI have two tables. The first one is as follows:
MP No (Primary key), Sales, Date Entry, Specs, Email
The second Table is as follows:
MP No, Quantity, Description, DWG, Price
There is a "one-to-many" relationship between the two tables through the MP No field so whenever I go to the first table there is a sub-table for each MP No. Correct?can I create an extra sub table under the sub table already created?
I did a search in here as well as Google to figure out why when I relinked the front end to the back end after adding 2 tables to the back end that the tables did NOT show up on the front end. Only the original tables that I began with.From what I have read there are different ways to do it. One suggestion on here was to create the table on the front end and export it to the back end. I guess I will have to do this going forward.
But my question is, after searching pages upon pages with no luck, since I already have the tables in the back end how do I tell the front end to find them and link them?
I have split the data base
Added a new table to the back end .But do not know how to update it to the front end
I have an old ERP system. The upload function is one line per value. So if I want to upload 7 models I need 7 lines, not one line with Qty of 7
however my source system sends the data as one line with Qty of 7
DLM2245/17DLM2245/17X1
DLP2204/17DLP2204/17X7
DLP2249/17DLP2249/17X7
DLV1004/17DLV1004/17X147
DLV1005/17DLV1005/17X158
DLV1009/17DLV1009/17X187
so in this example line 1 is fine. But line two needs 7 lines, and line 3 needs 7 lines and line 4 147 lines etc etc etc.so this is how the first three lines would look in the query.
DLM2245/17DLM2245/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
[code]....
access where in on clicking a button on an access form, I can insert Field A, B & C (all containing email ID's) in to a new mail message in outlook. Similarly I have a subject field which needs to go into the new message as subject.
I enter data into the table using the form where the button needs to exist.
I am creating a table in access and I would like to color code some of the fields if it is possible. There would be multiple green fields to represent it has usable data, Yellow to represent the data is in process and Red to represent bad data. I do not want to color code fields using queries, forms or reports I want to color code the fields in the tables only.
View 3 Replies View RelatedI have an issue with a code that I have in a form which adds rows in a table as many times as categories chosen from a list. However, the code is not working correctly: it adds the information and creates a row with a category in blank, in addition to the rest of the rows with one of the chosen categories. I would like for this not to happen, to add only as many rows as the categories chosen.
My code is the following:
Private Sub cmdUpdate_Click()
Dim valSelect As Variant, MyDB As DAO.Database, MyRS As DAO.Recordset
Set MyDB = CurrentDb()
Set MyRS = MyDB.OpenRecordset("Tasks", dbOpenDynaset)
MyRS.MoveFirst
[Code] .....
I was just wondering if I could use a query and table to create pivot chart? and If so how I could do this? I need information from both in order to create the chart I want.
View 1 Replies View RelatedEncountered this bug in Access 2010:
1) Create a table with a single text field
2) Enter some text values, including one which begins either "aa", "AA" or "Aa" (but not "aA"!)
3) Sort the field, and note where it puts the string(s) created in (2)
For me, they appear at the wrong end of the sorted list! I have tested this in Access 2007 and 2010 and it only happens in 2010. I'm using 32 bit Access on 64 bit Win 7 Pro.
I think what I want is:
1 table(1): record of people & contact details
1 table(2): list of events with check box's with the names of people from the other table
1 report: listing how many events people have attended.
When I add a new person to table 1 I want a field to be added to table 2 in the form of a checkbox, also when I delete this person I want this field to be deleted in table 2.how to make this an automated process.
I am trying to create a duplicate of a certain record in a table so that the user can then edit the new record - or old record even as it doesn't matter - as long as one of them is original. The idea is that any revisions / changes are stored the user may of made.
View 2 Replies View RelatedI have created 3 tables for simple inventory.
a) Item details
b) stock in
c) stock out
All I simply want to do is create a new table by item id to show balance of stock.
I have a table with the following columns: Task, Visa type, time it takes to perform the task. There are several taks that are performed for all visa types. I want to create a form to enter data to the table in which for the field visa type I have a list box that can allow multiple values, however, I do not to create a single line with the task and on visa type all the types of visas selected. I want to create a line for each type of visa with the information introduced.
I don't know if this is possible, the reason for which I want for the form to create several rows depending on the visas types is because then I have a query that sums all the types of visas. Can this be possible? I don't want the people to introduce manually directly to the table the data and also that for the same taks they have to enter manually 50 rows with values. I want it to be more simple and easier.
create a datasheet from 2 odbc linked tables which I will be exporting to Excel. The resulting datasheet will have four columns, 'Purchase Order Number' 'Stock Code' 'Delivery Date' 'Unit Price'. The information I require in the datasheet is a unique stock code (one occurrence of each stock code) with the most recent unit price based on the last delivery date for each product. The linked tables contain many Purchase Orders for the same stock codes over a time period of a number of years where the unit price has varied.
View 3 Replies View RelatedI have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).
Currently, I setup the query to pull info from the form field like this:
DateField: [Forms]![frmmain]![DateField]
However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).
I have three tables that contain different columns but linked by a primary column call Name. I want to create a table where all these different columns in the three tables join to form a master table which can be updated regularly either through the master table or the smaller tables. The master table also has the primary column as Name.
If I update the master table with records, it should update the respective linked table and vice versa. I also want to link these tables to my SharePoint site.
Note: except the Name column, none of these tables have any other columns in common How do I go about this?
Here is what I am trying to do: I have form, and a table which is created from this form. The data is entered a second time using the form to make sure there are no discrepancies.
Any easiest way to implement this? (create a new table (which is duplicate), and then compare them?
create a check on a feild(customer id) of customer table in MS Access , as "Customer ID is of 8 characters, the first 4 are alphabets and the last 4 are digits"
View 6 Replies View RelatedI'm a relative newbie to the more advanced features available to Access.
If someone could help me or point me in the right direction, I'd really appreciate it.
I have one table that contains companies and associated contact info. Each company can have more than one unique number ID (3 digit alphanumeric).
I want to take this table and run a query to create a new table that will only have one instance of each company name, along with the other contact information. The unique ID's aren't needed in this table (but it would be great if I could somehow toss them in, too).
This new table would then be used to create a form with a combo box containing all of the names to quickly jump to their contact info.
Any and all help would be appreciated. If a query isn't the best avenue for this, then please point me in that direction, too.
Thanks!
Hi there :)
I'm not sure if I've picked the right forum topic for this... It's not a straightforward table question, and I think the only way I can do what I need is with a query of some sort. Apologies if it should have gone in 'Tables'...
The situation is: I'm creating a database (using Access 2003) in which our secretaries can enter exam marks for students. The difficulty is that there are ten papers (exams), each student's exam is marked by at least two examiners and there are at least 6 examiners per paper. Every examiner also marks more than one paper, but doesn't mark all papers.
So, I've got a table with all of the examiners and the papers they're marking and I've got a table with all the students and the papers they're taking. Because we have to enter the marks in such a way that we know both which mark an examiner gave and (obviously) which mark a student received (e.g. so we can look at statistics for each examiner), I thought the best way to do this would be to run a query that created a new table per paper in which the field names would be: Student_ID, <name of examiner 1 for the paper>, <name of examiner 2 for the paper>, <name of examiner 3 for the paper>, etc until the end of the list of examiners for that paper. The student's number would populate the Student_ID field and then the secretaries would enter each examiner's mark in their named field. Like this:
| Student_ID | A.N. Other | J. Blogs | J.Q. Public | Agreed_Mark |
1234A 72 74 73
2345B 65 68 67
3456C 71 73 72
4567D 52 51 52
Listing the name of every examiner (including those who aren't marking that particular paper) isn't an option (and would have to be hard coded into a table in any case, as far as I'm aware, either in a query or in a table design. This is something I'm loathe to do). Ideally, the secretary would be able to press a button on a form and have all the mark entry tables for all the papers created automagically.
The examiners for the different papers change every year, and not every academic marks exams every year, so this data will not remain static. Hard coding a table with examiner names would make more work for the secretaries. (I want to avoid this as all mark entering for all students is done in a single day. This means over 600 students at 3 marks per student [mark 1, mark 2, and final agreed mark] with time to contact examiners with questions... and only 2 secretaries, each of whom deals with a different section of students).
Because of the nature of the marking, it would also make quite a lot of work for the secretaries if we had to cross reference a generic Examiner_1 field with a different examiner for each paper, so the field name really must be the examiner's actual name.
Can anyone help me? I'm happy to do it with either VB or SQL; I'm not a programmer, but I can usually work out what code does even if I can't write it myself. I should be able to adapt anything presented as long as it's complete and doesn't assume that I know the basics. :) I've also got two reference books to hand: _Microsoft Access 2003 Forms, Reports and Queries_ by Paul McFedries and _How to Do Everything with Microsoft Office Access 2003_ by Virginia Anderson.
Thanks very much for your time. :)
-Jen
Hello. I have created a database to keep track of clients and their training requests. I have already created the tables and have some data entered. It is just now that when attempting to create a query with the two tables that I realized I have problems as I am getting a Type Mismatch error.
The first table keeps track of clients. Each client has a unique client number field which is an AutoNumber. The second table is a Training Request table that keeps track of the training requests for each client. Each client may have many training requests. I entered a Client Number field in this table too and that is how the two are linked by relationship. I set the Client Number field in the Training Requests table to be a Text field. I realize they are different data types but I didn't think I could set it to be an AutoNumber in the Training Requests table.
How can I fix this table design? Would I just be able to change a data type? I am very unsure of what route to follow.
Thank you in advance for any help that can be provided.
I am fiddling with a DB right now just to try to work out some table relationships. I have a PK, Name, it is accompanied by a year in school. I then want to relate the year in school in a different table with the requirements for that year.
such as
Year Requirement1 requirement2 requirement 3
these would be check boxes (yes/no), and I could accomplish it in this format, but I am trying to have a normalized DB so
I realize it should be like this
1st year requirement
1st year requirement
1st year requirement
but I do not know how to link this back to the PK name when switching it to this format, so that I can pull up a form that shows if the person has completed the requirements for the year they are in. I am I going about this wrong? I have been looking at normalizing DBs and relationships but can't figure out the logic for my DB thought.
Thanks for any help
Riley
I have a database that acts as a front end for two different back-end databases. What I want to do is be able to copy a table from back-end #1 into back-end #2.
My first stab was to try to do a TransferDatabase on the linked table from b-e #1, but that just put a link in b-e #2, and not the actual data.
Can this be done?
Thanks,
David
I created my database a few months ago and split the database into a front and back end. I recently added a new table on the front end. How can I move this table to the back end and re-link it?
View 3 Replies View Relatedmy problem is that when i make a booking on my booking page it all saves, but when i go to the table where the bookings should all be kept, they all dissappear and only the recent booking i have made shows.
View 10 Replies View Related