General :: How To Filter Records Using Multiple Combo Boxes
Jun 29, 2014
I have a table with the following 5 fields. (Service Type), (Valve Name),(Size),(Rating),(Description).
I want to do two thing:
First: I want to select the required information from the first 4 fields using combo boxes and get the last field (description) based on the selected 4 fields. In other words, i want the record to be filtered using first 4 fields to give me the last field info.
Second: I want to store the filtered record (all 5 fields) in another table.
View Replies
ADVERTISEMENT
Jul 13, 2015
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
View 7 Replies
View Related
Feb 16, 2005
Hello,
I am wondering if it is possible to have several combo "boxes" in one form. The form is based on one table. In the table there are several fields which use a look-up (combo) drop down box to choose from: Type, Description, Manufacturer and Location.
In the form I want a combo box for Type, to bring up specific records in a subform, then I want a combo box for Description to bring up another set of records (within that Type of equipment) and a third combo box for Location to bring up all equipment within that location.
When I have tried to set this up - it changes some of the data in the in the subform - which changes it in the underlying table. If it set the form to open in New Record, then nothing shows up in the drop down box. Is there some If, THen code I could use to make it look first in the Type, then in the Description field, then close those out and look for the set of records that match in the location field?
Does that make sense?
I know how to manipulate in MSAccess templates, etc., but I don't know much about the underlying codes.
Thanks for any help!!!
View 1 Replies
View Related
Mar 24, 2005
I'm creating a form that has combo boxes pertaining to each of the following fields from table "Documents": DocumentID (primary key), DocumentTitle, DocumentAuthor, and DocumentYear. No combo box is used with any priority over the others. The working form will allow a user to retrieve the full document record (data for all fields) by using any combo box they want, as well as any combination of combo boxes. This means that if a selection is made in one field's combo box, the drop-down lists in the other boxes need to update based on that preliminary selection. The filtered results for each field, based on any and all combo box selections, are always shown in a single datasheet on the form.
The kicker is that when a user starts filtering records by making selections from the drop down list in a combo box, but then decides to TYPE in another field's combo box, I want the combo box they typed in to do two things: 1) filter the records for that field based on what they typed, if any records meet that criteria (e.g. they typed "B" so only records beginning with B are shown), and 2) if no records match the typed criteria, the search starts all over (at the top of the cascade), filtering all library records based only on what they typed in the most recent combo box.
Does that make sense? Any tips welcomed.
I don't know how to cascade combo boxes in this way.
View 2 Replies
View Related
Jan 3, 2013
I have a table of data regarding companies (contact info, etc). The company I work for provides these companies with up to 10 different products. On my input form, I have created 10 check boxes (and thus, 10 columns of Yes/No data in the corresponding table).
Each company has at least 1 product checked off, and up to all 10.
I would like to create a combo box that lists all 10 products, and upon selecting one, a list box then populates with the names of the companies (primary key) that use that specific product.
So, for example,
Company A buys CATS and DOGS from us
Company B buys DOGS
Company C buys CATS and ELEPHANTS
Combo box options: CATS, DOGS, ELEPHANTS
If I choose DOGS, then a list box gets populated with:
Company A
Company B
and when I click either of these, the record should be brought up for the respective company.
All of this should take place in the header of the form, while the form itself can be updated based on search selections.
View 3 Replies
View Related
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
View 2 Replies
View Related
Mar 14, 2014
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
View 4 Replies
View Related
Jan 25, 2015
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
View 3 Replies
View Related
May 15, 2013
I am trying to use .Filter for two combo box but it does not work...My code is:
Private Sub btn_buscar_Click()
With Me.FormularioEmpresas.Form
.Filter = "" 'limpiar el filtro
.FilterOn = False
If Nz(Me.cbo_actividad, "") <> "" Then
.Filter = "Actividad='" & Me.cbo_actividad & "'"
[Code] ....
In the the black line appears an error...I do not know why..
View 3 Replies
View Related
Oct 25, 2005
Im kinda new to Access and only been using the "Access 2003 for Dummies" for learning and making small databases. So far I can find out how to do the things I want, but recently got stuck with a combo box feature. What im trying to do is select entries in my combo box so that it will filter the table and show all its contents based on that filter. Im not sure how to link the combo boxes the right way and it seems some VB coding is needed which I dont normally use. If anyone has any idea how to do it, tell me how! Thanks. BTW im using Access 97.
View 7 Replies
View Related
Jan 31, 2014
I have 2 unbound combo box's on a form 1 called cboclient1 and the another called cboclient2. would like to be able to filter field name client name twice by cboclient1 and cboclient2 here my sql from my query
Code:
WHERE (((Assets.Client)=Forms![report gen]!cboclient1)) Or (((Forms![report gen]!Cboclient1) Is Null));
This works perfectly for cboclient1 problem comes when I try and add cboclient2
I have tried
Code:
WHERE (((Assets.Client)=Forms![report gen]!cboclient1)) Or (((Forms![report gen]!Cboclient1) Is Null))AND(((Assets.Client)=Forms![report gen]!cboclient2)) Or (((Forms![report gen]!Cboclient2) Is Null));[/
This doesn't work at all....
View 2 Replies
View Related
Jul 1, 2014
I thought I was in the home stretch of my project, everything worked great when I was messing with 200 records. Now that I'm messing with 2000+ records, things are very slow. So a search form redesign!
I have a form (frmSearch) that has a subform (frmSubSearch) embedded in it. The frmSubSearch is a datasheet only that is just pulling its info from a query (qrySearch). qrySearch has about 8 columns of data in it.
On the main form I have a combo box that is feeding its list from the qrySearch using a SELECT DISTINCT statement. So a user selects an item in the combo box and my After_Update fires. This sets a filter on frmSubSearch. I have three of these combo boxes that can add to the filter and they work great so far.
But I want to have the combo boxes filter themselves based on whats left on frmSubSearch. So if a user selects something in the 2nd combo box, the sub form filters and updates, but then I want the other two combo boxes to only have valid selections, and not something selectable that would wind up giving me a blank sub form result.
I have tried using .Requery in various ways, but its not working. I have also been looking into the idea of Cascading Comboboxes, but these don't seem to quite fit what I'm trying to do.
View 9 Replies
View Related
May 21, 2015
The layout: I have form1 listed in continuous view. I have about 10 fields being listed. I have unbound text boxes for each field in the form header designated as a filter for each field.
Ideal world: Have each filter update records as you type. But I would also like for a "cascade" effect on the filters as well. Being that I can type in a few letters in FilterField1, and type in a few letters in FilterField2 and it would only display the records where the criteria is met for both filters.
What I'm not looking for: Only applying 1 filter at a time for 1 field. I have this setup now, but would like it to be more versatile allowing several fields to be filtered at once.
View 2 Replies
View Related
Aug 6, 2013
I have a form with two combo boxes. The first box lists switch names from a query, and the second lists switchports from another query. The switchport query lists all the switchports for whatever switch is selected in the Switch Name combo box, and all the settings for that port (one column per setting). I want each text box to display the corresponding data from the switchport query for the switch selected in the first combo box and the switchport selected in the second combo box.
View 3 Replies
View Related
Jun 3, 2013
How to properly use 3 cascading combo boxes.
I have them set up and they work, to some degree.
I have three boxes Type/Sub-Type/Item. They all filter down to the next one, the problem is, when I get to the 3rd box, it filters ONLY from the 2nd box and loses the filter from the 1st. What do I need to do to get it to maintain the filter from the first box and then ADD the filter from the second box when populating the 3rd box?
View 2 Replies
View Related
May 8, 2013
I have a database and a form that is based off of a simple table. The table has NO look ups and all of the formatting is text. The form is continuous and simply displays these fields. (Kind of like a company roster with name and department). I have two combo boxes at the top of this form in the header with the intent of filtering the form records by department and employee type (lets say A or B).
I have tried every way I know how to get these records to filter and they will not filter correctly. Utilizing methods I have used in multiple other databases, I set the two comboboxes to cascade based on a query in the recordsource. The vba I'm using in the after event of each combo is ....
Me.Filter = "[Brand] = '" & Me.cbobrand & "'"
Me.FilterOn - True
'Brand is the "department" and the other identical code is for Personel_Type
This filters the records but independently. So, cbobox1 filters the records to show all Brand 1. When cbobox2 selection is made it shows all the Personel_Type of the selection however the first filter is already disregarded. (i.e. When cbobox2 selection is made, it contains both brands instead of the one I've just selected and filtered in cbobox1. )
Outside of making two queries to account for each possible filter, I have tried setting a filter on the filterON, I have tried a SQL based VBA code, I have tried making two forms and attempting to set the filter on open but either way, nothing keeps the first filter selected (or the FilterON, or both SQL filters, etc). The ONLY way I have found to get it to filter both is with the filter function in Access, which is not useful as my users will not have access to the menu bars.
I have this EXACT same setup in another database and it works fine with 3 cbo boxes with an after even to set a filter for the recordsource for all three.
View 5 Replies
View Related
Jul 1, 2013
I have a subform with the following fields:
Client name, Country, Country ID
I want to add to every row a combobox with a list of towns depending on the value in the field Country ID.how do I filter the comboboxes individually based on a value in another field on the same row?
View 1 Replies
View Related
Sep 19, 2013
I have a form and a subform with a master/child relationship set based on the primary key of each underlying table. All good there.Now, I want to use VBA to create a filter based on a set of inputs via combo boxes. But the filter must filter both the Parent and Child records.Example. "Show me only records where both only the Parent.Field1 = "string" and Child.Field = "string".I can do this in a QRY as follows:
SELECT Projects.[Project Number], Lessons.[Actions Resolved]
FROM Projects INNER JOIN Lessons ON Projects.ProjectsRecordID = Lessons.ProjectsRecordID
WHERE (((Projects.[Project Number])="AU-2102421") AND ((Lessons.[Actions Resolved])=True));
But, if I make this as a record source for the Parent Form, then the records in the Parent Form are repeated for each individual record in the Child form.
View 7 Replies
View Related
May 6, 2014
I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
the code I have started off with is
Code:
CurrentDb.Execute "INSERT INTO ColdTemperatures (ProductID, ColdTempDate, Temperature) VALUES (" & Lettuce & ", #" & Me.RealTime & "#, " & Me.Lettuce & ")"
which adds 1 successfully however if i repeat the code above for all 15 this Im assumming will create a potential bottleneck and slow the system down
is it possible to add all 15 records at once? do you think Im going at this the right way
View 5 Replies
View Related
Nov 8, 2004
I have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names
tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form.
Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above
tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
Thanks
View 14 Replies
View Related
Dec 14, 2005
Hi guys
I'm creating a database where there will be multiple combo boxes on a form. When a user chooses an option from the first combo box, I want the available choices in the 2nd combo box to be reduced and so on.
I thought I'd create a navigation table so the first column has multiple occurances of each option, but then the second column has the available choices for the first option etc. Then, I thought I'd use the chosen value in combo box 1 and filter my navigation table depending on the result.
However, the field doesn't appear to be storing the value. When I set up the query on the combo box to select distinct navigation.[cause] from navigation where navigation[type]=forms!form name[type] it doesn't work.
Any ideas
Cheers
View 5 Replies
View Related
Apr 16, 2005
I need a form that has multiple categories, 7, listed one after another vertically. I also need the categories divided in to 2 columns.
I need to have 2 combo boxes, 1 each controlling the info for each column.
Can I do this on 1 form. Suggestions would be appreciated.
Freddie
View 6 Replies
View Related
Oct 6, 2005
Hi All,
I would like a form (in Access 2000) that allows users to search the database using combo boxes that specify criteria. So, upon load the form would be populated by every record, then as the user begins to make selections using the combo boxes they can narrow the results down to only a few (combo box filters are cascading; each one narrowing the results the other returned). There would also obviously need to be a reset button and 'all' fields in the combo boxes. I have found the code to filter by 1 combo box but if more than 1 is added (obviously) the filter resets to filter only by the current selection. (See the method I used here (http://www.freevbcode.com/ShowCode.asp?ID=4668))
Does anyone know how to bolt these together so they work in sync?
Please be gentle as I've only been learning Access for 2 months and VBA is still very new to me
Thanks,
Bobadopolis
View 3 Replies
View Related
Jul 17, 2006
Hi,
I need help in the following 2 problems:
I have two combo boxes on the form and print button.
In one combo box showing numbers 1,2,3,4 and 5.
Other combo box showing logical operator =,<,>
User is going to select from one combo box logical operator and from other number "means class field".
Print button prints the report. Report is based on the query.
In the query in criteria line I put the code
[FORMS]![MAINFORM]![CMB_CLASS]
It works for one combo box. Problem is to get criteria from second combo box or concatenate the both criteria’s. In query criteria line it should show like <2 or =3 or what ever user is selecting.
Second problem is in the same line. Three text boxes and 2 combo boxes showing "OR" and "AND" For example in one text box user enters last_name and then he select "OR", second text box enter city and then he select "AND" from second combo box and third text box enter department. After selection he is going to click the print button to print the report.
I really appreciate if anyone knows the solution or they used this type of thing in there application.
Thanks
View 2 Replies
View Related
Jan 18, 2012
I made a form from a "CS-PG1-PG2" table. then i added a subform that contains these 3 fields plus some more information. What I'm trying to do is to insert in the main form 3 combo boxes:
CS (discount group): not to be linked/synchronized with the other two combos;
PG1 (product group);
PG2 (product group2): it must show the filtered results from PG1 combo box.
As long as I insert the CS combo box, everything is fine. Whenever i add the other two combo boxes, or just the PG1 combo box, then the two of them conflict and i get zero records.
All i want to do is to add these 3 combos and give an option to filter the results by CS or PG, plus give some sort of hierarchy order between the PG1 and the PG2.
View 5 Replies
View Related
Jul 11, 2005
Hi all,
Im trying to do the following query work.
I have a form, with combos , text fields which are filled in with parameters.
The query I want to make is complex.
For example we shall use field1, field2, combo1 , combo2 for explanation.
I want the field1 param AND the field2 AND combo1 AND combo2 to be evaluated for a result. At the same time, I want the user to fill in only field1 and combo1 or like that and the result to be right.
Is there any possibility to make them all work at the same time, individually, or in combinations ?
Sounds too Complicated ?
I ve managed to make it work only by filling in individually the fields or combos and have the right results. The other ways didnt.
Desperately need your helpppp. :rolleyes:
THNK U
View 1 Replies
View Related