I have the auto ID number set up set up on my Access database which gives me membership numbers. How do I have a supplementary auto numbering column to give me invoice numbers. You used to be able to do this automatically up until a few years ago. Now I have to enter them manually.
View RepliesHow could let me get auto invoice number.... like press Button or combo box??
Here we got some related info: 10 customers, each I'd like to get invoice number with their own prefix, example ICP, CUC and etc...
Then, I would like numbering to be incremental from each customer, mean: CUC001, CUC002, then, ICP001, CUC003 and so on...
When I need to put these invoice number into Data Entry table which like below:
Load Date>>Customer>>Particular>>Quantity>>invoice No
1/Jan/2014>>ICP>>part A>>100>>ICP001
3/Jan/2014>>ICP>>part B>>200>>ICP001
5/Jan/2014>>CUC>>part C>>50>>CUC001
18/Jan/2014>>CUC>>part B>>200>>CUC001
23/Jan/2014>>ICP>>part C>>50>>ICP001
I could not use 'Auto Numbering' for each line, as I need out some lines accumulated for one invoice number 'ICP001'.
My questions:
1. What can I do to let me Automatic generate invoice number which increment from last number?
2. What can I do to let me easy to put those 'invoice number' into my Data Entry table's invoice number field? (p/s: Append Query? Update Query?)
3. What if I need sorting (example to group ONE customer and ONE Particular) for my invoicing number? What I meant is ... let say there is 30 lines customer CUC with particular Part B in a same month, and I wanna get them into same invoice number.
If I want to arrange records sequentially in a report I would do the following:
From the Toolbox (Access 1 - 2003) or the Controls group of the Design ribbon (Access 2007 and later), add a text box for displaying the number.
Select the text box, and in the Properties Window, set these properties:
Control Source =1 Running Sum Over Group...
How can I sequentially arrange records on a continuous form?
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
View 3 Replies View RelatedI have a field for SSN. If the SSN has a 0 or 00 as the first numbers it auto deletes those numbers. Is there a way in access that when the record is visible the 0's are relpaced so that the SSN will read the 9 digit. Also i have another fiels EIN with 7 digits an i need for there to be 2 9's in the beginning. I was goingto use vba but when i go to yp it i only get .value <
Code:
Me.SSN.Value
Value is tho only option to get. IDK y it does this or how to get it to shop if there is a ay.
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate()
If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then
Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1)
DoCmd.RunCommand acCmdSaveRecord
End If
End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
Hi all
I am currently building a holiday planner for my employers and I would like to try and display the days of the year as rows and the staff as columns (Fields). When someone adds a new member of staff, I would like it to also add them to the calendar table as a new column and name the column the same as the individuals name. Is this possible using VBA or SQL string?
If anyone has a better idea as to how I can display the forthcoming holidays for a team I would really appreciate your comments.
Thanks
Gareth
I have created two tables, I want to copy one column from one table to another table column with repeat value in rows.
example :- copy "Material number" column from Table1 to Table 2. In Table 2 Material number will repeat in 20 rows.
Like in excel we give one cell reference to multiple rows.
How I can link table and give reference of column.
Hi there,
Some scene setting to my problem. I have a corporate system numbering invoices consecutively globally. For a subsidiary in Poland this presents a problem - all invoices for the subsidiary must be consecutive. ie. where the globally issued invoices for Poland might be 1,4,5,7 these need to be renumbered before issue in Poland.
It gets more complicated as the Polish Office standard is to invoice in the format "PL/Year/Month/Number" with the Number restarting from 1 for each month.
My database is very simple.
Table 1 = Link table to Oracle corporate data
Table 2 = Local table of invoices already produced (Global invoice number and date recorded)
I have a filter to find all new invoices (unmatched items), a report to print them and an Append query to populate the new items to the Local table.
My challenge: (1) to recreate the Polish numbering scheme and (2) have it consistently when existing data goes up to mid month and a new append operation has to follow the invoice number sequence.
Any ideas? I guess Autonumber is no good and I have little array experience.
Thanks
We have a part numbering system that is currently like this, 11Y22 where 22 increments by one until it gets to 99 where it then goes back to 0, once it goes to 0 the letter increments to Z in this case, now once the last three characters get to Z99, then the 11 gets incremented eg, 11Z99 will become 12A00. Hope that is clear :)
My question is, can this system be implemented into the auto numbering in Access?:confused:
Thanks in advance
RD
Is it possible to start auto numbering from a number other than 0? Say 2000 for example.
Thanks in advance
RD
can I make a field that can auto-number which the format that I want??
As I know that there is two format for auto-number
but I don't like them
I want to number my own format
like
XXX-YYYYMM-ZZZZ
XXX is the category number that would be selected in the form connecting to table
YYYYMM is the date year and month
ZZZZ is another auto numbering
Can I do so
How do I get a auto Number to start a 1001?
J
If I have taken a program to creat a new program......I have cleared all the tables and what not. When I enter my first record in the auto format number starts at 963....... How do I get this starting back at zero?
thanks
Not sure as to whether or not this query shoulsd go here or else where? But here is the problem. I have been asked to repair a database that has lost the autonumbering facility. Apparently this was caused by somebody leaving the database open when the network crashed.
Each team can access the database via forms but now when the team responsible for registring new pieces of work tries to enter a new piece of work the autonumber reverts to one already within the database.
I was told that the only fix to this problem was the DMax function which I am unfortunatley not familar with. Can anyboby explain how to go abouit this and where it should be used.
*I know that this may not be the best way of resolving the problem but this is not the actual problem but my way to simplify of explaining the "problem".
I have a Table with 3 fields.
Field 1 - Auto Number
Field 2 - First Name
Field 3 - Last Name
Initially, the Table was sorted via First Name,
but now, there is a change in requirement to sort by Last Name.
Next requirement is to number (Auto Number) according to the Last Name.
Current Sorted via First Name
Auto Number - First Name - Last Name
1 - Ben - Young
2 - Chuck - Norris
3 - Dennis - Johnson
4 - Ernest - Anderson
If sorted via Last Name
4 - Ernest - Anderson
3 - Dennis - Johnson
2 - Chuck - Norris
1 - Ben - Young
Desired result
to Sorted via Last Name & (Auto Number) via sort.
Auto Number - First Name - Last Name
1 - Ernest - Anderson
2 - Dennis - Johnson
3 - Chuck - Norris
4 - Ben - Young
Is there a way to do renumber / resort the auto number this?
*I have thousands of records....
Although there are few records in my database, the auto-numbering started at 45. So I deleted all the records so I could start from zero but it still happens. I checked all the properties of that field both in the form and the table itself and I can't find the problem. Any ideas would be most appreciated. :confused:
View 2 Replies View RelatedI was entering records using a form and all was well until suddenly the autonumbering went from 7 to 14! I went into the table and deleted #14 and tried it again - same thing happened.
View 4 Replies View RelatedCan this be done ??
I have a query on a timer that basically looks at a linked table every minute and tells me whose in the database. I want to number the rows in a column so I can reference this to a form that has 7 spaces. The number of 'users' could vary from 0 - 23, although this will soon be limited to 7 (hence the 7 spaces) to aid performance and speed. I am then going to reference the number to the unbound space on the form, iif(isnull()) 'ing the blank cells so it isnt an error.
I thought of an append query, but the sequence will always start at the next number, not from 1 each time - or as far as im aware it will - so I cant reference the cell then.
Can any one help please.
I have a Chart of Numbers (range) that corresponds to a specific event
Event 1: 1000000000-1999999999
Event 2: 2000000000-2999999999
.... up to...
Event 9: 9000000000-9999999999
When they select Event 1 in the form I would like it to generate a unique Identifier within the range that Event 1's fall into. It would be an incremental increase for each Event 1 enterered. The same for the other 9 events.
The Event #'s are a quick and dirty way of knowing what type of event has taken place without reading any of the description. It is a requirement for this and I have no way around the Event #.
Is there a way to reset the auto numbering? I import new data then archive the old data. As I do this weekly my auto numbers are getting high and my users do not care for this aspect
View 3 Replies View RelatedI have column called "order" in table called "mov" and this column has this layout
Code:
1
2
14
255
222
1755
12
And I want to update this column to be corrected numbering from 1 to the last cell number - lets say it 17540 - this update has no criteria conditions, just this field.
I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
Any ideas?
Jen B. :)
I have 5 copies of a database that 5 users enter data into (including Pre, Post and Follow-Up information). These users send me their database quarterly and I am suppose to merge the data into one database from which to run reports, etc.
The problem comes in with the auto-numbering. Each "Pre" table has an ID that is auto-numbered. This auto-number is also stored when a corresponding "Post" (or follow-up form) is entered so that we can be sure the pre-, post- and follow-up are all linked to the same individual. When I merge the data, they are reassigned ID numbers in the Pre (while the Post still has the original Pre ID number) so now I've lost the link as to one individual's pre, post and follow-up form.
I realize now that the database shouldn't have been built this way, but is there any way to work around this. I've even tried exporting all of the rows for each of the 5 users into Excel and then importing them into Access in a new table (just so I could have the ease of running queries) but I seem to be getting errors doing that as well.
Any ideas?
Jen B.:)
My ID field is an auto-assigned number. Is there any way to restart the auto-numbering at number 1?
View 14 Replies View RelatedI am using an access program with a form with detail section. I would like to create auto sr.No when i am creating a new quotation. Using Autonumber didn't work because it start numbering from last quotation.
Snap shot is also attached.