General :: How To Position Class Students On Report Based On Their Total Marks
Sep 2, 2012
I am working a database that manages student's Records including marks for various subjects, but i would like to do the following on each of the students' report cards:
a) Display the marks for all the 12 subjects .This one i have done.
b) Display a total for all marks of each student.Done as well.
c) The problem is, i don't know how to display the position of each student on the individual report cards.I want to base this grading on the total marks obtained by each student in the same class.
I can't quite get my head around this - any help is much appreciated.
I have (amongst others):
tblStudents (containing basic info. name etc) tblClasses (containing a list of studentIDs with classes they are in, so, for example, there may be 3 entries of studentid "1", each with different classes next to them, to show that studentid 1 is in classes: a b and c for example. tblGrades (containing studentID and masses of fields with different grades for different subjects in.)
What I would like to do, is select the class name from a list (which I can do, no problem). Open up a form listing all the students in that class, with all their grades next to them.
This SOUNDS simple - but I don't think it really is! I could just be having a VERY simple moment though too - if so, I apologise!
Please Help I am new to this place Developing Asp pages in Dreamweaver MX 6
In Access, 4 fields ID( AutoNumber), A(Number), B(Number), Tot(Number), Result(Text) After entering numbers in A & B, how to input total automatically Can I set something in the Default Value in the properties of Tot Like =A+B Whats the code ?
Next, If the Tot > 25, I want to display "Fail" in Result otherwise "Pass"
After testing it, the database got corrupted. I had backed it up just prior to using this.
It was something like = Sum(Abs[AmountPaid], [Paid] = "X")
I have a continuous subform with an "AmountPaid" column. The total is displayed in the subform footer. I need it to display the total for only the fields with an X in them denoting that they were paid. This total should match the statement we receive.
After clicking the button to put the X in the Paid field, then I used the formula to update the AmountPaid field.
Joe..........10..... X Al..............5.....X Flo.......... 25
Hello I am trying to design a CD label 'report', it's going well except that the title field of our productions has to print with quotation marks around it'. The name of the field is, yes you guessed it, TITLE. I know it must be a simple solution but I'm at a loss to find it or understand it. I'm just a dumbo. Thanks for your time and expertise.
I am having a frustrating problem with a report filter I have been using for years. The filter works fine if the data is a number, but I am using it for text this time and it simply will not filter the report because I am unable to have the text display as per below. I need to be able to put a qutotation mark before and after the text so that the report filter will recognise and apply the filter appropriately.
Hello all. I have deleted a Report but the underlying reference in the VBE editor in the CLASS OBJECTS list remains for the report and is giving me errors during run and compile.
Any idea how to delete the Class Object once the object has been deleted?
I have a class roster report in which the Employees' names are concatenated in a text box. When I select to sort the concatenated names alphabetically, it is sorting by the Unique ID, which is a letter and four numbers. The letter used to match the last name, but newer IDs are random. So most names are still in order, but some are not.
The Employee field Row Source is:
SELECT [Last_Name] & ", " & [First_Name] AS Employee, tbl_AM_Operators.User_ID FROM tbl_AM_Operators ORDER BY [Last_Name] & ", " & [First_Name];
What do I need to change to have the Employees' names alphabetized on the report?
I and trying to link to Outlook 2007 using the "External Data/More/Outlook Folder option and keep getting the "Object Class does not Support the Set of Events" error message.
I can link to a DBF and Paradox file without any problems.
I am running Office 2007 Professional and Access 2007 and Windows 10.
I have also done the following:
1. Removed Office 365 2. Decompiled the Access VBA code and corrected any issues 3. Compacted/Repaired the database
I have attached a screen shot of the references that I have selected.
This is a new setup as I recently purchased a new PC and Windows environment. I still have the old PC running Windows XP with the same configuration and it also experiences exactly the same error message.
I have an annoyance!!! I have a few reports in the access database that I'd like to hard code the print margins so that when I send any database updates to users that have different printers, the margins all come out the same. So that I don't have to then go to each computer I've updated the database on, to open each report and reset the correct print margins.
Another annoyance - along the same lines: A report that previews correctly several times and then - for no reason, previews with larger margins and, hence, data is lost off the right.
I have distributed my front end on the shared drive for users to copy to their desktops.
In one form I have a formula in the query that show's the word 'Gap' if any of the 15 questions on the form is equal to 'fail'. It runs on current when the user is in a record it shows the word 'Gap' at the top header part of the form.
When the user opens the form they get an error message pop up that says "The expression On Current you entered as the event property setting produced the following error: Object or class does not support the set of events."
Once they click 'ok' they are able to work in the form until they attempt to filter records by their name it pops up again.
I've tested on my end and no errors or issues come up.
Couple days ago our database was not opening, Access would open but show a blank workspace. Anyhow, we restored the database from Server and it worked on all 5 shared systems on company's network but this one computer. It is giving the error, "Object or class does not support the set of events."
I tried to copy new local folder but nothing. I checked the links and target folder it looks fine.
I tried to import the everything into new database but it said I don't have permission for that.
what's causing this issue and what can I do to fix it?
hi i have a button that loads a report. If i then close the report the form, which is set with no border/no max/min/close/non movable and opens maximised, places itself off centre. I want it to stay maximised full screen. The only work around i currently have is when the use moves the mouse over the form it maximises itself. Will this then be calling this function everytime the mouse moves(cant be very efficient). is there a better way to maximise the form Immediately after closing the report.
I am creating a DB for race results and have a field which calculates the elapsed time based on the start and finished times. What I want to do now is populate a field "position" with the finishing position relative to other competitors elapsed times in the race. But I cant see how to do this.
I understand I would probab;y have to use some sort of query but not sure how to create it.
I am a newbie to ms access and forms and I have a small problem with a form. The solution has lots of different forms with different tabs for each section. This particular tab has a few sub forms in it. When I switch into the specific tab in question, the screen moves down ever so slightly and I always have to scroll up to see all the other tab headings.Is there a way to do something by code or a property setting I can use to make the page start from the top without users having to scroll up each time?
I hope I have explained myself clearly enough, if not I will be more than happy to provide more info.
On paper I have designed a faculty contact database and have now come to the point where I am designing the form. In the contact information table are Cell, Home, Office fields as well as Personal, Work, Alternate email fields which will contain the corresponding information. On the form after the information is entered the person needs to select an option from each of four combo boxes to indicate which is the preferred number, number for student, preferred email and email for students. The question is how to populate the text fields in a report based on the selection of the combo boxes with the information stored in the corresponding field (cell, home, office phone numbers and personal, work and alternate email). I am assuming it is done in the query but I don't know how or can it be done in vba?
Is there an automatic way of moving the cursor when an outlook email is opened using a VBA event??
Right had a look and haven't managed to google this yet but the background is as follows
I have some code that puts a recordset of people's email into outlook and leaves users with the outlook message open ready for them to append anything they want to the message body.
At the moment the cursor flashes at the very start of the message and users need to scroll down with keys or the mouse to the end before they can add additional text.
I want to automatically move the cursor to the end of the outlook email message opened using a VBA event?
I have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
Good Day! I seem to be running into a calculation problem in one of my queries. I have two fields in the query, AdmitDate and DischargeDate. I built in an expression, Exp100 to catculate the date diff in days between these two dates. Now what I want to do is display a count of the grand total days. So, if I have the following three records:
ID AdmitDate DischargeDate Exp100 1..... 01/01/06.........01/15/06............15 2......07/12/06.........07/19/06............7 3......04/27/06.........04/30/06............3
My query should display: Healthy Plan Total Patients=3 Healthy Plan Total # Days = 25
How can I program this to correctly display this information? Thanks for any help or advice, it would be most welcome at this point. Cheers.
how to make my form controls change size / position as my form is resized / loaded on a computer with a different resolution. Several of the tutorials out there suggest putting code on the "on resize" property of the form. When I looked at the Northwind database to try to mimic their code however, it looks like they must be doing something different as there is no on resize code under the form properties and I was unable to find the code they do use.
I need a way for my query to take all rows with the same TellerNum and add Field1, Field2, and Field3 together for those records. So, there may be 20 records with the same TellerNum, and I need Field 1, 2, and 3 to be added together and then totaled for all 20 records to give me 1 grand total. I need this to be done for each TellerNum, so that the results will be a grand total for each TellerNum. So, the results may look something like this:
I have a query I am trying to build currently which creates a running total based on set criteria. I essentially have three columns (All times are in minutes). The visit ID, the duration of a visit and the time difference between the current and previous visit. e.g.
So a line will have the calculation of the current time + the difference between the current and previous visit if the difference is below 20. I have the following:
Code: Public Function Cont20(MyVal As Long, MyDif As Long) As Long Static OldValue As Long Dim NewValue As Long If MyDif >= 20 Then NewValue = MyVal OldValue = 0
[Code]....
Which I put as Cont20([Duration],[Difference])
The problem seems to be on the return aspect, its not calculating correctly. I had the formula in Excel which worked great, but this is proving troublesome. As a note the Excel formula was such that it would add the previous running total and then add the current duration and current diff. e.g. In cell A7 the formula would be A6+B7+C7 and so on.