If the user clicks on this link then the respective file should be open..I don't want the front end users to see the entire path. So, I would like to have the names as 1234.pdf in the location column instead of M:New1234.pdf. Is it possible to hide the entire path in the backend and show only the name of the file. so that if users click on 1234.pdf then the file needs to open.
I have recently been working on the code below and I have neally completed what I want to do.
Private Sub H_Enter() Form!H = "hyperlink#E:WORKSPEC PROJECTWORKSPECS" & Form!S & Form!PC & Form!extension & "#" End Sub
What I want to do is have the file location (bit I have bolded) stored in another form or table and have the code read it from there as the file locations may change, rather than having to enter it for each line I just want to enter it once and then as and when it changes I just change the one line but it changes all the hyperlinks
I have a query that combines few different tables in order to create a View (Query) that is then used to by and Excel sheet to update a list. The Excel is dynamical updated when new data is inputted in the Access Tables.
But one of the fields in a query is combination of path name and report name (another filed in one of the tables) that crate a complete path to a file that contains some additional information.
Now since the Excel is updated dynamical and users of this Excel sheet are not very advanced. I waned to make it easy for them to just click on the location of the file and the file opens up. But I am not able to make the Query that contains the file destination hyperlinked.
Ii have a database running on Access 10.0, I am using the insert hyperlink dialog box (access by Ctrl K) to allow users to insert a hyperlink to a file (could be any sort of file), into a text box.
The problem I have is most of the files are held many directories above where the database is (we have a BAD directory policy, 10's of folders within folders) and it gets a little painful to get the user to go up so many levels, due to the hyperlink dialog opening in the "current folder" view, ie where the db is located.
Simple quest, or so I thought. Can I change the default directory "Current Folder" that the dialog box starts in ?
I have already tried chdir"c:" but to no avail.......not that obvious then...
I am using MS Access 2010. I have a code that I am using that loops through a folder gather all the names of the files in the folder and inserts them into a table (shown below). The table is named "tblFiles" there are two columns in the table titled file name and file path. What I want to do is to also loop through the same folder to find the file path of the files and insert them into the file path column has a hyperlink where users can just click on the hyperlink and the file opens.
Private Sub Form_Load() Dim fs, f, f1, fc, s Dim rs As DAO.Recordset Set rs = CurrentDb.OpenRecordset("tblFiles")
In the access form I want to add a button with a special functionality.
After clicking "Select file" button special window should be open (or something else). It should give user a possibility of files locating (doc, pdf, rtf, txt ...).
After selecting the file and confirm the choice in the table "File_location" in database path to the file should be saved .
I'm making updates for the front end then i send it to 10 pc's in the office then i should change the backend location via linked table manager for every pc
So is there any way to let the user choose the backend location when he open the database nad then it will automatically update the tables link
I've always practiced to keep my backend table names to no more than 8 characters because of speed issues. Can this also goes for the server name? My current location looks like this now orld71-testing-aFinance..I am wondering if changing the server name with speed or is that only for folder names.
I have splited the system into foreend (FE) and backend (BE). FE and BE are located in different PC lying in company internat! However, I found there always give an error message 3219. And, nseems it is caused by not pointing correcly to the BE when I open tables, the syntax are as follows
Dim db As Database Dim rs As Recordset Set db = CurrentDb() Set rs = db.OpenRecordset("Invoiceyr", dbOpenTable) rs.MoveFirst rs.Edit Me.THISYR = rs!Invoiceyr
The 3219 error appeared at statement "Set rs = "what's the syntax of the path that I should include in the statement in order to point correctly the BE.
I'm trying to create a report where I can use a section header as a hyperlink to show/hide detail, but only for that section. For example, my customer names are:
Code: ABC Co. ZYX Co. 123 Co.
If I click on ZYX Co., I want it to show the contracts for ONLY that customer:
Im trying create a new form to add our current database that will password protect excel, word and if possible pdf documents when they are dragged onto it.
For now I only have 2 boxes 1 containing the password to be applied and the other to drag the file onto.
I have it all working so once its dragged on it works out if its a word doc, opens a hidden instance of word which then resaves it with a coded password.
The problem comes when change it so the user enters the password to protect it, when they enter a password or click on the drag box it doesn't allow the drag. it seems once they have entered the record the drag option is not available anymore.
I've got the forms and queries in one .accdb file and my tables in a separate .accdb file. The forms file links to the tables in the tables file. The tables file resides in a folder called simply enough C:acc_tables and thats where i browsed to (obviously) when i set up the linkage.
One of the users does not wish (for whatever goddamn reason) to create a C:acc_tables file to stick the tables file in , and wants the tables file in some other folder.. Unfortunately this user does not have the skills to delete the existing links and re-link to the tables file after putting it in the folder he wants.
Where in the file that holds the forms and and queries do i find the path setting to the tables linked file? Can it be changed without deleting links and then re-linking?
Is it possible to follow a hyperlink to a file without using a file extension?
I have links being created based on the name of a file, but because I haven't used a file extension it crashes.
I know I can give the user a choice of what the file extension is and add it to the hyperlink, but it's an extra step, and another place for someone to make a mistake.
I'm potentially using 3 different file types, Word, Excel and PDF's.
The hyperlink works if I just reference a drive/folder, or if I add the file extension.
I need code for save dialog file ,and select the file from textbox and save it to the selected location.i have only this code and i dont know what else i can do with this because it just opens the save file dialog !
I want to deploy an access database at a small office with 5 computers, small network. However I do not intend to create a server in order to have a domain etc. Operating system is win 8.1 pro. Should I use a homegroup or workgroup ? Would it require password in case of workgroup? Which is a recommended way to setup this and keep some security like a guest cant access these files?
Objective?: I'm attempting to change the file location of the back end portion of my split database.
What I've done so far: I've used the linked table manager to update the back end location of all tables in the front end portion of the database.
Symptoms: When making a change to the OLD back end: If I change the name or move the old back end and then try to re-open the front end, Access opens as if I'm opening the application itself without any database associated with it until I restore the OLD back end to its appropriate state.
When making a change to the NEW back end: If I change the name or move the new Back end and then try to re-open the front end, I get a: "Could not find file" error message until I restore the new back end to it's appropriate state.
I've just discovered a query that I think put me one step closer to resolving this issue. [URL] .....
When I run this query:
Code: SELECT MSysObjects.Database FROM MSysObjects GROUP BY MSysObjects.Database, MSysObjects.Type HAVING (((MSysObjects.Type) In (4,6)));
It returns 2 results: 1. The path of my old back end 2. The path of my new back end.
Unfortunately I'm not able to update the values from the Datasheet, but this does confirm to me that the old back end is still some how being used by the front end even after my tables have all been updated.
I am creating a database where I want to be able to browse to a file, select it and import it into a table. I am able to do this. BUt what I want to do is create a log of these imports and haveit include the path of where the file was inported from.
The field I am having issues with is the capturing the path of the file.
Below is what I am using to browse and import a file.
Private Sub Command5_Click() Dim dlg As FileDialog Set dlg = Application.FileDialog(msoFileDialogFilePicker) With dlg .Title = "Select the Excel file to import"
I have a field on a form which the user currently has to manually type in the file path to a specific picture on a local drive. After the file path is entered, the path is linked and the picture is shown in an image box. I did this because I didnt want to bog the database down with attached files.
I wondered if I could have a browse button, which when pressed brought up the browse window to allow you to locate the image (using the standard windows browser). Then when you clicked ok, it writes the filename into the correct field on the form.
So a while back I created a database which I use to keep track of my companies large list of products. It is very simple only 3 tables, 1 query and 1 form. After running into a problem with copying and pasting updates on each computer in the office I decided to split the database on a network drive. This worked for a bit, however I had to add new fields and modify the form, which corrupted the file. Luckily I had a backup before the split.
As far as I could tell all I had to do was modify the backend file and make a new front end. However it seems like it is not as easy as I thought it would be. How do you modify a split database without corrupting the files or using a non-split copy?
I have a sub form with checkboxes. Each check box represents one of the columns/fields in my query. If one of the boxes is checked, I only want the column that matches with the check box to appear. I have done some research and have came upon the ColumnHidden property.How would one do this in a macro or VBA format.
I would like to know if the following is possible: I have a table, I have a form based on that table (datasheet view) and I would like for certain columns to visible or not based on the input on a Combobox (list of countries) that is based on another form.
I have searched on the web and I found that the following:
On a button based on the main menu form:
Code: Private Sub Go_Click() Dim stDocName As String Dim stOpen As String stOpen = Me!cboDest stDocName = "Datasheet" DoCmd.OpenForm stDocName, , , , , , stOpen
and then on the event "on open" of the form Datasheet I have inserted the following:
Code: Private Sub Form_Open(Cancel As Integer) Select Case OpenArgs Case "USA" Forms![Overflow]![Tasks].Visible = True Forms![Overflow]![Constant Number (Min)].Visible = True
[Code] ....
I have done it as a test, but it appears that it does not work. It opens the forms, but it does not hide or show the columns based on the option, it brings all the columns.
The user wants all the non-basic functionality of the ribbon hiden. To accomplish that by doing the usual stuff:
File >> Options >> Current Database >> Allow Full Menus (unchecked)
Everything worked as expected, but we came across an issue. The user needs to open a report in "print preview" and they need to be able to export their report to excel. The "print preview" ribbon tab is there, but it is not showing the "Data" area, where all the export options are.
How can I do this without a costume ribbon?
Maybe there is a way of manipulating which areas of the ribbon/tabs/areas/controls are enabled from VBA?
