I have a text box with the following statement:
Summary detail: Sum(IIf([dacthc]=0,Null,Fix(100*[dqty]*([dstdhc]*[drate]/[dacthc]-[drate]))/100))
My question is, if it meets the criteria, is it possible to make it default to a "0" in the field.
Hi, here is my query:
SELECT DISTINCT tblvisit.[Pen ID]
FROM tblvisit
WHERE (((tblvisit.[Visit Date From])<=[forms]![fRMBOOKINGAVAILABILITY]![From]) AND ((tblvisit.[Visit Date To])>=[forms]![FRMBOOKINGAVAILABILITY]![To])) OR (((tblvisit.[Visit Date From]) Between [forms]![FRMBOOKINGAVAILABILITY]![From] And [forms]![FRMBOOKINGAVAILABILITY]![to])) OR (((tblvisit.[Visit Date To]) Between [forms]![FRMBOOKINGAVAILABILITY]![From] And [forms]![FRMBOOKINGAVAILABILITY]![to]));
This successfully finds booked pens in a cattery. How though, can I get to see the pens that are free? Is there a feature that will allow me to conduct this query before conudcting another one to show the values which didn't appear? Thanks:D
I need for Access only to sum the "hours worked" of my payroll data, only if another field, "pay code" meets a certain criteria.
In Payroll, some codes are used to designate actual hours worked like REG (Regular Hours) and like OTS (Overtime Straight) while other codes are added as "premiums" to these hours and do not mean that you actually worked those hours, like OTP and HOD (Overtime Premium & Holiday Premium). The hours are only added as a reference to the actual hours worked they are attached to. Their units should not be counted as hours worked.
I want Access to 1) Group By Cost Center, 2) Sum "Hours Paid" that are tied to a REG or OTS (only), but 3)Sum the Earnings for all pay types.
Basically, (in excel-like terms: Hours Paid Column= SUMIF of Paycode = REG OR OTS. But Earnings Amount Column= Sum of all Paycodes)
Cost Center
Job Type
Hours Paid
Pay Code
Earnings Amount
20530
Security Guard II
7.5
REG
190.37
[Code] .....
I have a report based on a query and in that report I added a text box to be yes or no depending on 1) the number of days to complete and 2) the type of urgency. There's 3 different urgency levels so I was trying to create iif statements based on each one with the corresponding days using the OR operator between them like below:
=IIf([t_Days]<=2 And [Urgency Level]="Expedite (1-2 days)","Yes","No")_
Or IIf([t_Days]<=7 And [Urgency Level]="Normal (5-7 days)","Yes","No")_
Or IIf([t_Days]<=30 And [Urgency Level]="Low (14-30 days)","Yes","No")
Any 1 of those by themselves works fine but I need it based on all of that. So with that said, is there a way to do this? I tried using VBA code, but I think with the type of report I'm running that that wont work. It has a repetitive one line detail section with the data I'm trying to view.
I have a table called estimates and a field in that report is called RFA and this is a checkbox. How can i open a report i created (called EReport) for all rhe records in this table that have the RFA field checked (therefore true).
View 2 Replies View RelatedI have a main form with 3 subforms. Each subform is identical except for the value of the filter property. The filter is for the same field, but with a different value for each subform. So, for example, the first subform has a filter of:
Code:
[WBS Element]="DEF" And [Period]=Forms!frm_ProjectFinancials!Period
while the second subform has a filter of:
Code:
[WBS Element]="PPE" And [Period]=Forms!frm_ProjectFinancials!Period
and the third subform has a filter of:
Code:
[WBS Element]="EXP" And [Period]=Forms!frm_ProjectFinancials!Period
The recordset for each subform results in a single record with numeric values in each field or no records at all. When the resulting recordset is empty (no records), the bound text fields on the subform display as blank. I want these fields to display 0 instead of blank so I can use them in other calculated fields. Functions such as Nz or IsNumeric do not work since there are no records and the values are neither null nor numeric.
How I can display zeroes in the bound fields when no records exist that meet the filter criteria? Or is there a way that I can dummy a resulting recordset to have all zero values when there would otherwise be no records?
I have the following code
SELECT Count(T_STUDENTS.studentsID) AS res1yes, T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup
FROM T_STUDENTS, T_COACHING
WHERE (((T_STUDENTS.res_vrijstelling)=False) And ((T_STUDENTS.stud_year)="1") And ((T_STUDENTS.stud_coach)=forms!F_cboCOACHING!cboCOACHING))
GROUP BY T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup;
It runs fine, untill the moment the count is 0. At that point it breaks the form. How can i tell access to deal with this? Somehow i need to replace the count result with 0 if there are no records that meet the criteria.
I there is no result in query, I need the default result zero in my form field. I only use query wizard to create queries.
View 5 Replies View RelatedI have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I have a form, which i use to book in products received. What i want to do is if the quantity received is equal to what was ordered then i'd like to update a yes/no field (Order Complete) on a separate table to true.
View 8 Replies View RelatedI have created a 6 search boxes with names Author, Published, Language, Title, Keywords and University. If I enter "A" in Author search field then it should return all the 6 fields which contains "A" in Author field. It worked well.
My Requirement :
The column published is the year. In search box of Published if I search for 2000 then it's returning all the 6 fields which contains "2000" in Published field.
But most of the people doesn't know the exact year in which the book is published so they need some favour like, If they search for 2000-2010 in Published field then it should return all the fields which are between 2000-2010 in the published field.
For this do I need to create 2 extra text boxes and name them as Starting year and Ending Year? or else we can achieve this in single text box as xxxx-xxxx?
I have an AfterUpdate event where I want a list box to be populated based on three different criteria based on a table in my database
1. Complete = False AND
2. Supplier on form = supplier in table AND
3. Status in table = "SUPPLIER_RFQ FOLLOW-UP" OR "SUPPLIER_RE-RFQ TO OTHER SUPPLIER"
I am having trouble with the last OR statement criteria, i cannot get this to return values correctly. Here is my code:
Me.cboSupplier.RowSource = "SELECT DISTINCT [Consolidated_Master_Req_Pool].[RFQ Contact] " & _
"FROM Consolidated_Master_Req_Pool " & _
"WHERE consolidated_master_req_pool.Complete = FALSE AND [Consolidated_Master_Req_Pool].[RFQ Supplier] = '" & Nz(Me.cboStatusRFQ) & "' And [consolidated_master_req_pool.Status] = '" & "SUPPLIER_RFQ FOLLOW-UP" & "' OR [consolidated_master_req_pool.Status] = '" & "SUPPLIER_RE-RFQ OTHER SUPPLIER" & "'" & _
"ORDER BY [Consolidated_Master_Req_Pool].[RFQ Contact];"
Hello.
I have a query that is pulling data based on a date in a table. For some records, that date field is empty. For those records, the data should be pulled based on the date of 1/1/06. I tried doing this
=IIf([Signed SLA Received] Is Null,1/1/06,>=[Signed SLA Received])
It doesn't like this at all, it brings back no data. I also tried putting 1/1/06 in quotes, but it didn't make any difference.
This is probably a totally incorrect way to get this done, but I don't know how else to try it.
Thanks!
Stacey
I have a problem. I have a form, being used as a subform. I have an "Original Date" field and a "Revised Date" field. I want the value the user types in the "Original Date" field to be the default value in the "Revised Date" field.
I used default value "=[OrigDate]" but that doesn't work, it just shows a blank. Both "Original Date" and "Revised Date" are in the subform.
Is there any way I can default "Revised Date" to the "Original Date" entry (and let the users change the "Revised Date" later on)
Thanks
EEK
I'm having an issue getting my query to omit records with a blank field - in fact, it omits all records.
What I'm trying to do is:
I have a list of customers, with phone and email addresses. I want to filter via query for only customers with their email address's entered.
Here is what I have:
IIf([Forms]![AdvancedReporting]![Check230]=-1,"*",Null)
I want to add a number to my results within a query depending on the month and how many results. For example I have 10 results in my query 3 from January, 5 from March and the rest from April. The 3 from January would be 1,2,3. The five in March would be 1,2,3,4,5 and so on. Is it possible to do?
I'm using access 2003.
Is there a way to use the date entered in one field in a table as the default date on another field in the same table?
View 1 Replies View RelatedMy DB has one main table where all the records are stored, and one form with multiple tabs allowing for data entry and editing. There are two distinct "Data Types" I have in the tables, so on the two distinct form tabs, I created a text box with a default value for each one (if it's a Type A record, then the box has a default value of "Type A" and the same rules for Type B).
Here's the problem. It doesn't matter if I include the default value in the Form Properties Default Value field or if I do in VBA (using this method), when a new record is entered into the table, it makes them all default Type B records.
On an existing DB i have set a default value for a field. The customer has now asked that they be able to change this default. I thought, hey, no big problem. They have SuperUsers, so i included a little pop up form that lists all the current valid values for that field (from a look up table). If the default value needs to change a superuser can access this and select the new default. That works fine. The trouble comes when setting the default value on a form.
I figured a simple bit of VBA in the OnOpen event - Me.cmbTypes.Value = Me.cmbTypes.DefaultValue - should work. However the value it returns from the default is ""xxxx"" and as such it is read as "". I can work around it by removing the extra " " but WHY does it do this? Would it be better to set this up as a custom property of the DB?
Using Access 2003
In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg
In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.
I have a combo box as a value list and all the values apart from one are valid data entries in the table but I want to combine two of the values and then get the query to run if the combined values are selected. The value list is this:
(All);Brand1;Brand2;Brand1 & Brand2;Brand3;Brand4
The criteria in my query is this:
IIf([Forms]![MyForm]![Brand]='(All)',[MyTable]![Brand],IIf([Forms]![MyForm]![Brand]='Brand1 & Brand2',"Brand1" Or "Brand2",[Forms]![FrmCustomListATM]![cbBrand]))
Its the OR part that doesnt work.
In a form, the value of any field may determine if the other field will be true or false. For example in my form, inventory, if value in code is equal to 2 then the Field Table will be automatically false.
View 12 Replies View RelatedI've built an IFF expression that is determined by a number of variables.
If any of the Data fields are filled I want the statement to return true.
If NONE of the four are filled in I want it to return false.
As it is, it returns true no matter what.
Here is the expression I'm using:
Title: IIF (IsNull([Data1] and [Data2] and [Data3] and [Data4]), True , False)
Is it possible to add an Iif Statement to a default value?
IIf([hours],"YES","NO")
This does not work?
I am making a default value statement in a table that looks like this
IIF([company name] IN(“name1”, “name2”, “name3”), Date()+14, Date()+30);
this statement says that if the companys name is any of the names in the list, then the date outputed will be todays date +14, otherwise, the date will be todays date +30.
whenever i try to use the statement, access keeps giving me the error...
"you omitted an operand or operator, you entered an inalid character or comma, or you entered text without surrounding it in quotation marks"
what is wrong with my statement??