I would like to be able to put an if expression in the default control of a tx box.
I would like to say
if txtA = 0 then [Forms]![frmNewAppointment]![OrderTime] else [Forms]![frmAppointmentTreatmentItems]![TextA]+[Forms]![frmNewAppointment]![OrderTime]
Is it possible and am i close to doing it mysel?
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
I'm having trouble with a Form and getting a text box entry box (Date entry) default to the date entered on the last record, which is linked to a table.
The only way I can get it to work is to type the date into the Text Box's Default property, for example, #11/13/13".
How to get the correct syntax or code into the Default property of the Text Box to make this work? I only want the entry to change versus the previous record/entry if the User changes / enters a new date.
Is there any way to use a lookup field as the control in a QBF as opposed to a text box?
View 10 Replies View RelatedSo I am trying to setup a default value in the tbl design. The Following two fields are the two in question(StartDate & ReportDate). It already has relevant dates properly formatted in the StartDate Field. The ReportDate will always be the day before or minus 1 day from the Startdate. My question is that I can't seem to get the syntax right to make it work.
Screenshot included.
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Code:
=IIf(Nz([MasterCasemaxUnits],[MasterCaseMinUnits])=[MasterCaseMinUnits],[MasterCaseMinUnits],[MasterCaseMinUnits] & " - " & [MasterCaseMaxUnits])
When I run my report, the control displays: #Type!
I have a few forms in my database that I used the wizard to design. They work as intended however the default control that access uses is horrible. Is there a way to modify the control of these forms without building them from scratch? I'm afraid I wouldn't be able to build it from scratch and have it function as it does now.
View 6 Replies View RelatedI have an inventory entry form with 3 controls on it. One is the area counted, the second is an item number, and the third is the amount counted. When the form is opened it prompts for the area counted which then changes the default value so you don't have to enter it again. The problem is that it works for a number but not alpha-numberic or alpha.
The table is set as text and I've tried setting the inputbox to string and still can't seem to avoid the #Name? error.
Any direction would be appreciated. I tried looking up a past thread but couldn't find anything this specific.
hello all! I use this site very frequently when I run into issues and I can always find an answer... until today, hehe.
anyway, here is my problem. in my application, on the main form if you will, are 4 tab/page controls. when the user uses the navigation buttons on the bottom (these are access' form navigation buttons), regardless of which tab they were on, i want it to automatticly display the first tab, first. i have figured out that it is on the form_onactivate event that i must do this, however i cannot seem to get that one tab to the be the default. i have tried using the page index, set focus, i have tried calling a control on that tab/page, refreshing the form, simulating a user "click"... needless to say i am fresh out of ideas. :confused:
any suggestions would be greatly appreciated. thank you for all the help you have given in the past too :)
Is there a possibility that a control CAN be edited that is bound to an expression?
All of my Form properties are set to editable, no locks, allow deletion, allow addition, etc.
I just want a text box in a Form to be edited by users if they want to update it but they CAN'T since it is bound to an expression.
Table1 has field (% Completed this Period) that may contain a value, or may be NULL for each entry, depending on how much work was performed that period. The records are sorted by date.
Form1 has a textbox that basically keeps a running tally of "% Completed to Date" by summing the "% Completed this Period" for the current period and all previous periods. So, my Control Source for the textbox is the DSum(...) function.
The problem is this: If I am looking at the first record and there is a 0 (null) value for "% Completed this Period," (i.e. No work was completed that period), I want to display 0 on Form1. However, Access just displays nothing - a blank textbox. I tried making a default value, but nothing will show up since I already have a Control Source set for that field. If I take the DSum function out of the Control Source, then the 0 will show up. But, obviously that defeats the whole purpose of the textbox. I guess I'm trying to figure out how to display the DSum value IF it is something other than 0, BUT IF IT IS 0, then I want 0 to be displayed. Any help would be appreciated.
code doesn't wants to set the control default value
View 5 Replies View RelatedHow I might use a value selected by a user on a database opening menu (which remains open), as a default value for records created programmatically in other tables?
I wonder if I need to write a function to repeat the value - but I cannot see how to use a form value outside of the form's own code. Some of my existing code inserts values into tables using SQL converted into VBA and I do not really want to start fiddling with that - I would rather for now use the default value of the table for the field.
My variable which will change depending upon which set of records a user is working on is a string "FullAccession".
When a user creates records in a table called tblGroups, I need the string "FullAccession" to be the default value in the tblGroups.FullAccession field. A unique integer in the tblGroups is "GroupNo". "GroupNo" and "FullAccession" are joined in a unique index for tblGroups. There is a separate PK autonumber.
I am dynamically trying to set a control default value. I have the code below in the On Load event of the form. I get an error msg that says "Run-time error '2467': The expression you entered refers to an object that is closed or doesn't exist."
Forms(mainform)("Dyn_" & Trim(str(Project_ID)) & "_SubFrmTab03" & PT_Suffix & "_Approval").Controls("Groupid").DefaultValue = "=Forms!" & mainform & ".ClaimInfoGroupID"
I have 3 tables, tblClients, tblClientDetails, and tblSchedulingDetails.
I have a field in tblClientDetails to contain the client number from tblClients, and I have two fields in tblSchedulingDetails to contain the client number and the client details number.
I then created a form that holds most of the fields for all of the tables mentioned above to enter new client names, new client address info, and basic client scheduling info.
Now, I have set the default values using the property sheet in design view for the following:
ClientNum > ClientNum_tblClientDetails and
ClientNum > ClientNum_tblSchedulingDetails and
ClientDetailsNum > ClientDetailsNum_tblSchedulingDetails
I promise this is not a riddle...
Here's the quandary - ClientNum_tblClientDetails is autofilling from tblClients, and ClientDetailsNum_tblSchedulingDetails is autofilling from tblClientDetails, but ClientNum_tblSchedulingDetails is not autofilling in spite of the fact that the default value is set with =[ClientNum].
I then created a modal dialogue form with the fields from tblClients and tblClientDetails with a command button that opens another modal that contains the fields from tblSchedulingDetails, set the appropriate default values, and the ClientNum_tblSchedulingDetails autofills as needed.
The question at hand is, why do I have to use modal dialogue forms to perform this action and cannot do it in one single form?
I am having an issue setting an instantiated forms' control. I am having RemDate ("Date") and RemTime ("Time") TextBox; so far the date textbox shows 1/1/1988 12:00 AM (the visible value is the time only) and the Time textbox doesn't show anything.
Code:
Set frm = New Form_ReminderAssigneesFrm
frm.RecordSource = "Select * from ReminderAssignees Where RemID = " & Parent.RemID
frm.RemID.DefaultValue = Parent.RemID
With SetRS(frm.RecordSource)
If Not .EOF Then
frm.RemDate.DefaultValue = FormatDateTime(.Fields("RemDate"), vbShortDate)
[Code] ....
Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub
this button code opens the k_job_card form.
the form opens and says 'Record 1 of 1, (Filtered)
i have a control on the form that opens.. and i am simply trying to assign a default value to that control..
it is a textbox.. for my jobtype field (text datatype)..
is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?
this is how the Form Data tab is set at the moment..
On my form, I currently have a combo box that updates text box data with each new selection. However, after these text boxes for FirstName, LastName, etc. are updated, they cannot be edited. Here is the error message that appears in the status bar:
Control can't be edited; it's bound to the expression '[Form]!EmpList.Column(13)'
I'm thinking it might be a result of the data source for the text boxes being a combo box expression.
Any suggestions on how to fix this?
Thanks. :)
Access 2007
In a table I have 2 fields:
D1 , Date/Time , DefaultValue: Date()
D2 , Date/Time , DefaultValue: Date()+1
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code:
Private Sub txtD1_AfterUpdate()
Me.txtD1.DefaultValue = Me.txtD1
Me.txtD2.DefaultValue = Me.txtD1 + 1 day
End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy
Date separator: Dot
Simple: 05.12.2013
Expressions in Access have given me some trouble before. Mainly due to inexperience. I hardly ever work with them. What I am trying to do is make the default value of a form textbox control the minimum value of a field A in a table A. The datatype of Field A is Date.
So far I've got:
=Min([table A].[field A])
In the Default Value of the form's property sheet, but this just returns a blank value. I've had a look in the table and there is no value that is blank in field A.
I'm trying to pull a date from a table into a text box on a form tab control using DLookup and I just can't figure out what is wrong with my DLookup expression:
=DLookUp("DateOrdered","tDateOrdered","PrNumber=" & [PrNumber]) ----- (DateOrdered is short date, PrNumber is text, db is split Access 2013)
Whats missing in this expression? I've tried every criteria variant I could find but to no avail.
Hi All,
I have a search form with a text box for the user to enter a word or phrase to search the DB. I want the text box to have a default value to say "<Enter word or phrase here>"
I cant seem to figure it out. Any help would be great.
Thanks,
Bones
I tried searching everywhere and cant seem to find an answer to this one...
Is it possible to have a default value in a table which would be current month and year + text? Eg. mm/yy "text"
=now() & "text"
is fine but I need to format the date to mm/yy and cant seem to get it right.
eg. 08/06 Lease Payments
Also is there a way to do it for previous month, so if processing today it would give 07/06 Lease Payments?
Thanks in advance!
Hi Dudes
I have a text box on a form which is formatted as medium date and I want it to default to the Monday of the following week. So for today it should have 07-Mar-05 in the text box.
Can anyone please advise a method for this.
Thanks
VC
I am trying to set the result of a query as the default value for a text or combo box. I have tried setting the query as the default value in the box's property. I have also tried doing it in VB. The code looks like this
Dim SQL AS String
SQL = "SELECT Address
FROM Table1
WHERE Name = Forms!Main_frm!name_lbx.Value;"
Forms!Address_frm!address_cbx.DefaultValue = SQL
I have also tried
Dim SQL AS String
SQL = DoCmd.OpenQuery([update address_qry])
Forms!Address_frm!address_cbx.Value = SQL
Where update address_qry is the same as the above.
I keep both forms. I know how to do it by setting the queries as values in a list box, then transfering the values to the text or combo boxes. But I was hoping there was an easier way.
Thanks
Alex