If I have a form with multiple list boxes, lets say named 10, 20 and 30. and multiple text fields called 15,25,and 35. Now I want to get a value in the list box based on the text box value so I make row source queries that looks like this.
SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![15]));
SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![25]));
SELECT [table].field1,[table1].field2 FROM [table1] WHERE ((([table1].field2)=[Forms]![form1]![35]));
So now my question... Is it possible to make one query that picks up the 15,25 or 35 depending on wether it is being queried from 10, 20, or 35. The difference in name is always the same except for the first number so could it be made to reference where it is asked from?
I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code: sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _ " FROM ActivityLog" & _ " WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _ " ORDER BY ActDate;" 'MsgBox sqlstatement Me.EditPOListBox.RowSource = sqlstatement sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
I have a combobox with a value list as the control source. I have a user who clicks the drop-down, but there are no options. Every other user is able to view these options, and this user has no problem with any other combobox with a value list.
I have an access database where I have added a new field, but I cannot find the name of that field in the Control Source list to link it from where the data will be entered. It IS in the table, too. Why in the world is it not working.
A user enters a New Job Opening into the form for New Job Opening. Later, a user enters a New Interview in the New Interview form.... when they enter the job opening number into the job opening number field, it auto-populates the other information previously entered into the New Job Opening form into an area within the New Interview form. I have made sure the new field is in the table for the New Job Openings table.
I am in the process of creating a training database that includes levels of proficiency with certain tasks for employees.
In one of my reports I would like to appropriately display with tasks the employee "Cannot Perform";"Can Perform with Assistance";"Can Perform Alone";"Trainer" (straight from the field list of the task). But I can't seem to get the hierarchy correct. Tried it in a PivotTable too as I thought similar to PTs in Excel you could get some kind of "count" of values. Couldn't make that happen either.
Each employee has a proficiency rating on about 20 different tasks. Proficiency input is controlled by a field list. I would like to structure this part of the report like so:
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values? Is there a feature provided by MS Access 2007 can enable such a conversion?
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values?
Is there a feature provided by MS Access 2007 can enable such a conversion?
I have a 2 unbound text boxes.1 populates the id number from a table.I want the other to display the first name where this id occurs. I am currently putting this in the control source of the seconded textbox
I have a combobox containing the "Field Names" of a table called "Main" Also, I have a report called xyz which only has one field.
All I want, whatever field name user selects in the combo, report displays the results of selected field name only.
example
Main Table has three fields (Fie1, Fie2 and Fie3) The combo box lists the names of all three fields (Fie1 to Fie3) Report has a textbox in the detailed section.
I want user to select the field name from combo click button to generate the report (lets say if user selected Fie2) and want textbox to list all the records of Fie2
i tried [Forms]![Fm1]! [cm1] but it is listing the field names not the values in the field...
I'm working with several different source datasets. Mostly this are TXT files.
When I import the data in a new table with a specification, I want to validate if the dataset is the correct dataset be validating the headers in the source data.
I have created a table with the headers, that consists of 92 columns. Below 3 example columns of the header data:
Now I want to check during the import of the imported data has a line in it that is equal to the data in the table headers. If not, the import stops and informs the user that the data set is not correct. This to prevent that incorrect data will be inserted into the database.
Some extra information: The data is import into the database via VBA DoCmd.TransferText into a new created table, using an inport specification.
If the data is okay, it will be appended to an existing table that is being used to process the data further. After that the import table is being deleted.
My question is in Access 2010 I am currently in the property sheet at a combo list i just added to a form to be more precise with the data the user will look for. My question is I know I have to be in Control source in order for the combo box to select the data that I entered from the table. When i click the arrow the drop list is empty and then when I click the elipses (three dots) it takes me into expression builder, so i am confused on what I should do to select the field I want the combo box to focus on.
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform 'Application.TempVars.Add "varcountryselect", "*" SELECT in the listbox "lstlocationsperproject" SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0) Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
i have a list box with 6 columns. in column 6 there is a time field. on selecting this list box i want to set the value of a combo box to the time field.
This has no effect. I am not sure if i have done this correctly. but the combo box has manual values in it. the reason i want to have values in it is so if the treatment is 45 minutes at default. But i want to change it to 30 minutes just for a single occasion then i thought that this would be the way to do it.
I've been working on a large project for my employer for a year now (but software development isn't part of my normal day to day duties). Most of the work (around 70%) has been done in my own time at home. The company were going to buy a system that would be customized by developers at a cost of around $60,000. I've developed a solution that is probably better than what they would have got. At my last appraisal my boss said that it had been discussed that i would be rewarded if i delivered it. My question is:
Is it possible to password protect access to the source code? I'm working with Access 2003 just now. I know I can create a .mde file to prevent access to the source code but that would make further development difficult. e.
I'm looking to move an excel sheet to access because the row counts are too much.The main thing it does is compare the supplied data against a list I hold in the sheet.There are not duplicate records, however..Some data is a direct lookup for a full match, but much of it is a count to see how many records contain a certain string.
I have 500 keywords which have a countif function in using wildcards.I need to create a query/report which will return a list of records from the original list which contains each keyword featured and how many times it features.I was going to do it in PHPmysql but the time it took to parse a million records for every keyword made it pointless.
eg: keywords: look billy magic
list: "have a look and see" "spanish dave" "who is billy brag" "looky looky I go hooky" "who's the man from argentina" "could it be magic now"
my spreadsheet would return a 1 next to ""billy" and "magic" and would put a 2 next to "look".
the sheet has the keyword in each row and next to the column: =COUNTIF(list,CONCATENATE("*@",B13)) where "list" is the external data.
I have an application written in Access 2007 and packaged using the Packaging Solutions for deployment with Runtime.My problem is that I've written an updated version, and after carefully saving my original Back End away from the install site, uninstalling Runtime and the FE, installing the new FE with a blank copy of the BE having the same name and Runtime, and copying the filled BE into the same folder with the FE (replacing the linked, but empty, BE) I find that SOME of my tables in the BE are not being recognized. This isn't true of all tables. I can open some of the forms and find everything there. In other cases I get the following error message "The record source "tblName" specified on this form or report does not exist."
I've created a simple database, with tables, forms etc but I've got stuck when I've tried to insert a 'Button' onto the HOME page which when pressed will display an invoice and give you the option of emailing to client or printing.
I think I've gotten messed up in my relationships or the macros which I've copied from another access template.
on the home screen, I click 'new quote' then 'view quote' when the window pops up and then when it tries to generate the invoice I get the error
I have a client who needs a Database created in Access for him. he would like to regularly auto-populate this Access DB from an Excel file - like twice a week.In addition, he wants me to create Forms, Queries, reports and Macros for him in the Access, which will have 2 Tables from Excel files and about 3 Tables created in Access.I figured that I could do that if I gave him a link to the Tables he needed from the Excel file(s). But how do I work remotely for him- the path to those files is on his computer. I can load them to mine, but then he can't open the files.How can I create Forms etc. in an Access DB which uses links from source files as its Tables?
I am trying to create a image based off a drop down result. I have had no problem with setting up a image based off a static number. e.g 0456432 in the student id field will bring up students photo in the network share.
What I am having an issue with is the control source will look for a number instead of the name that the drop box displays. this is due to a separate table for the drop box.
what is the expression i need to make in order for the name to appear from the dropbox rather than the source id number?
I know my form is large and got too many fields for a standard form but trying to expand it anyway and don't really want to go to sub-forms...as then cannot expand it without re-creating forms/queries/tables structure. (or that what i believe)
My form and subsequent table is nearing the 255 limit, so I created a second table and just used a query to put both in form, but then I found out that a query also has the limit...
So if have two queries set up from each table but to same form?
Currently I have over 600 columns I need to use in a query and since the limit is 255 columns per query, I need to create multiple queries. Currently the form shows the record source of the single query I have created. Now that I need to create the other queries, how do I have the forms record source to recognize the other queries as sources as well?
I am after getting an access 2003 database to look after and it contains SQL pass through query's. The database is a front end to a MS SQL server database with a connection string that is contained in a module.
I believe the SQL pass through queries are connecting to the same database as the rest of the application and somehow is using the connection string in the module. However I cannot find how that is configured on the SQL pass through queries.
Most documentation on the net seems to point at using ODBC to connect slq pass through queries to outside databases but I don't think this is the case. There are not Odbc sources set up for the database I am look at.
I have a database that reports activities by region.
Each week, my regional volunteers report statistics on a number of club activities. This is in the form of zero to theoretically infinite activity reports that they enter on a website. I download the .csv from the website, add the activity reports to the activity table and send them a totals summary every now and then.
The summary report shows figures for every club in the region, even if no activity reports have been entered for that club that week or ever.
This works fine, including forcing the query to return zeros when no reports have been submitted for that club.
What I want to do is have the report also show (in brackets next to each figure) the position as it was X number of days previously.
I can make the query and report to show the figures now.
I can make the query and report to show the figures X days ago.
What I cannot work out is how to combine the two queries into one report source so that I can get
Club 1 100(50) 75(0) 45(45) Club 2 0(0) 0(0) 0(0) Club 3 20(19) 0(0) 200(50)
etc
If I try and make a third query that gets the sums from qryNow and the sums from qryXdaysago for each record in qryClubsByRegion, I get two lines for each club.
