I've managed to use the lookup wizard to show me two fields in the drop down list, first name and last name, but when i select a record I can only see the first name in the cell, not both.
Is there a way to display them both together?
As one is typing in a field with a lookup wizard - dropdown list - is there anyway to see the list without clicking on the down arrow? Perhaps there is a choice somewhere in the program where dropdown menus for the lookup wizard can be made visible?
View 3 Replies View RelatedHello,
I wonder if anybody can help me.
I have a table called ITEM, within ITEM I have three fields ITEM NUMBER (Key Field), Item, Cost,
I have another table called INVOICE ITEMS, Within INVOICE ITEMS I have six Fields, INVOICE NUMBER, ITEM NUMBER, ITEM, UNIT COST, Amount, Total Amount.
I want to use Lookup wizard to complete the fields ITEM NUMBER, ITEM, UNIT COST from the ITEM table.
Is this possible?
Regards
Nathan
I have a people table for all the people .I set a query to select only those that are Family Navigator Mentors ID,FName,LName..I use this query for a lookup on the family navigator table to select a mentor on the form I want the ID FName and LName to show up not just the ID.????
View 9 Replies View RelatedI am an Ms Access newbie and need some help on how to update 2 fields from a drop down list.
The drop down list has 5 columns. The first column is the partname that is bound and updates the table with that partname. I want to take the
listprice which is the 5th column and update a field in the table with the listprice that corresponds to the part name.
Thank you.
I have a form (Create Guest). Employees can add guests and fill in the details. There is a label Country that Employees can fill in manually.
The problem now is that this is very fault sensitive (people type: "The Netherlands", "Holland" or "Netherlands" for example while this is one country).
How do I create a country drop-down list so that employees won't have to type the country in manually. I don't think adding all the countries in the world in my table is a good solution.
I have a Table named TBLBookings...on one of the fields I have a Lookup wizard thats linked to a Table named TBLVehicles which includes
Car Reg
Car Type
Location
When I run the TBLBooking and click the drop down list it shows up
Car Reg
Car Type
Location
but once the field is clicked all it shows in the records is the REG where in a form id like to see what vehicle it is location etc...is it possible to have extra fields in the form named Car Type and Location and once the registration is chosen it automatically fills in the correct details for them?
Drop down list equipped with new item input provided. My application now use a drop down list to access/display a form with certain item selected, but I want to entry new item using drop down list which equipped with "entry new item" then I hope the form can be accessed belongs to new item.
View 1 Replies View RelatedI have a number of drop down menus to select Building Name, Building Number and then Equipment Name and Equipment Number. I want the list to be linked so that when you select the building name the building number is picked up. Also I want the Equipment List's with to change so that once the building has been selected only the equipment available in that building is available to be selected. Is there a way I can do this?
View 3 Replies View RelatedI have a Access DB created. I have a field, which is a dropdown list. The users can go in to a form and manually create a record into the table etc.
However, i've some data that I'd like to import into the DB.
This data is in Excel.
When i import the data, everything is fine but the column that has the information for the dropdown field does not import.
so to clarifiy, the field in the DB is a dropdown list.
the field in the Excel data is just a plain text entry.
is there somehow i can import this data?
i have developed an application in access 2010 . and split into front and back end . now i want to add more tables in back end and i need to define lookup list in table definition from the query presently in front end . when i get into lookup list and query builder doesnt show front end content ... how to solve this problem ?
View 2 Replies View RelatedI am having trouble using a form as input for a query. The form uses multi select list boxes, with then intention being that if I select multiple fields then only records which include those fields will show (not only fields that contain those and no others).
I also have successfully worked up some keyword searches that I would like to have run on the same query. So say I want to search for two values in my list box, and it also needs to include keyword X... how would I run these all together, or is it possible?The form is "EVR Search Form"..The query is "EVR Query - Trending Filters" and I've also made a copy to test on, "Copy EVR Query - Trending Filters"
I have three fields that I would like to have access the same table using the Lookup Wizard. I am unable to get the query to work.
Example:
The Fruit table has 5 records, let's say: orange, apple, banana, kiwi, strawberry.
The first field -- Fruit1 -- would use the Data Type Lookup Wizard referencing the Fruit table.
The second field -- Fruit2 -- would also use the Data Type Lookup Wizard referencing the Fruit table.
The third field -- Fruit3 -- would also use the Data Type Lookup Wizard referencing the Fruit table.
The bottom line: a person will have a choice of 3 fruits.
Again, the problem is that I cannot get the query to work where I choose =banana for the criteria for all three fields. Banana might be person one's first choice, but it might be person two's second choice, etc. I'm looking for all the bananas no matter which choice it is.
Your assistance is appreciated.
I will try and explain this as simply as possible.
I have a lookup table that is purely dates so the field is Clinic_Date, the format is date/time, and the input mask is set to short date.
I have a table called appointments. I have a field called appt_date which I am trying to make a look-up field by using the wizard to look up from the clinic_date table. However I an getting the error message "You have entered an expression that has an invalid reference to the property l." (thought it doesn't look like the letter "l" but more like a long vertical line).
What on earth could be going on?
I tried to chosee Lookup Wizard as data type in my table so I can have drop-down options from another table. However, I received an error message, "ActiveX component can't create object". What does this mean, please help :confused:
View 1 Replies View Relatedhey,
i have applied a lookup wizard to some fields, just to see what happened, and now i want to undo it... how do i do this pls?
thanks
I'm using the lookup wizard for to allow a user to pick a value from a text field. However, when I use the lookup wizard the field type for the field that displays the selected value is number instead of text. When the selected value is displayed in List Box, instead of the text it displays the ID number for the record the text is picked from - For example, if I choose the name "Alex" from the lookup, the number 1 is displayed, if I choose "Bob" it is 2 and if I don't select a value, it shows 0.
Any idea what exactly is going on?
How does one use the lookup wizard for dates?
It says: The lookup wizard doesn't apply to fields of this data type.
I want a combo box for dates.
I have a form, "Update Employee Information" that allows me to navigate through records and change data like name, adress, etc. I would like to know how to create list (or autofill) so that it won't take long before finding an employee.For example: I have a Employee ID and would like to search on that so the form can fill in the rest of my information. I have thought of two methods that I like:
(1) Click on a list "Lookup Employee", select ID and then the form will fill in the rest
(2) Without clicking a link, typing in the ID in the form and the rest of the data gets filled in.
Heres something I dont understand about the lookup wizard:
Ive done a lookup wizard on one of my fields, so that now the user gets a drop down list of options to choose from:
0;1;2;3;4;5;6;7;8;"NTSC";"PAL"
Ive also set "Limit to list" to yes, so that these are the only options the user can enter.
However, it will still let me change and play around with the data type settings under the general tab. I dont understand why it lets me do this. I can set the lookup to the above list, and then specify a date type of type "date", and it will allow me to do it.
Why is this the case? Which datatype should I set it to, if I have a list of values like the one above?
I've been doing a lot of research and reading on databases and normalization and things of that sort because I need to create database from scratch. I've been maintaining a db that someone else made, but it turns out I will have to recreat the whole thing because it's not useful anymore and the users need a more user friendly db. I have a couple of days some are:
tblTO
------
TONumber
Contract
Product Directorate <- combo box 20 items
Document Type <- combo box 15 items
TOManager <- combo box 10 items
tblTOItem
----------
Product <- combo box 13 items
JobNo
BasicDate
ChangeDate
ChangeLevel
TotalBillablePgs
TotalTextPgs
TotalArtPgs
Standard <- combo box 22 items
TemplateVersion <- combo box 20 items
SourceFormat <- combo box 15 items
SourceLocation <- combo box 10 items
The ones I have the arrows for will be a combo box on my form.
My question is should I make each of these field a table of its own?
For instance make the Product field a table and list all the 13 products there?
Or keep the Product field in the tblTOItems and in design view of tblTOItems use the Lookup Wizard and type in my values there to make a lookup column.
I have seen it done both ways, and I was just wondering which way is more efficient.
I know this is odd but I need to somehow create a way of making a dropdown list with more than 50 characters. One has 250. There are 3 options to choose from and only one needed to be selected.
I am happy to just type a 1, 2 or 3 in the box IF it can be referenced somehow to one of the 3 longer statements that I need to use but how to do this.
I'm trying to create a field with the lookup wizard, however it's a bit more complicated. I need the field to have multiple choices(3) and when a specific option is selected I need some additional choices to appear. For example: Question - have you ever used a specific product. Options: a-yes, b -no, c-other. If option b is selected then thats it, but if option a is selected I need a few other options to appear: was the brand Option1 or Option2? Also did you use it before(option1) or after(option2) smth.
View 2 Replies View RelatedI've designed a database at work to collate information about locations around the world that are contaminated by conflict and military activities. I'm struggling with the use of the lookup wizard to populate some fields in one table from another table.The database is ultimately meant to be used to identify contaminated sites in various countries and also to be a source of data for an online interactive map. As such, it needs to hold a fair amount of information. I figured that it would be normal that some fields and tables would be connected to one another. So, for example:
Country table is looked up by the conflict table to provide the names of countries participating in a conflict. To do so I used the lookup wizard. Similarly, the Site information table is looked up by the Site contamination event table to provide the names of contaminated sites. The Site contamination event table. Then the Site assessment table looks up the Site contamination event table to provide the name of contaminated sites. The relationship between these three table is intended so that at any given site multiple instances of contamination and their subsequent assessment can be recorded. This is where I started noticing problems. When I tried to input some fields into the Site assessment table, specifically the 'Site name', it would only display the primary and foreign keys in the drop down menu but not the 'Site name'.
- Have I messed up by relying on the lookup wizard in my table design? This seems to be the consensus in this and most forums (I checked another thread in the 'Tables' forum here). That said, I've seen some people making a distinction between using 'Lookup tables' and 'Lookup fields within a table', but given my relative newbyness I'm struggling to see the difference!
- If the answer is yes then what approach should I take to achieve the same aim (having multiple tables that feed information to one another). Initial research seems to suggest putting lookup/combo boxes in my forms. I'm dabbling with that at the minute but so far the results haven't been as desired.
I've attached a zip file with a screenshot of my relationships diagram to give an extra idea. Note that the relationship between the 'Site assessment' table and 'Site contamination event' table isn't showing up as I removed while trying to troubleshoot, but it is supposed to be one-to-many from 'Site contamination event' to 'Site assessment'.
I am trying to create a lookup wizard to record the number of people who attend a regular event. I have a table recording the names, surnames and DOB of registered members and a number of other tables for regular events we hold. Previously people have been manually adding the names of attendees and of course there have been inconsistencies in the data. I want them to look up the names from the table of registered members. I have been using the lookup wizard, but it is only displaying the first name in a string. I need it to display id, first name, surname and DOB in a table. I also want to be able to type in the first letter and then pick from the list.
View 5 Replies View RelatedIs there anyway that access could create a drop down box within a drop down box? For instance, when a selection is made in a drop down box, it opens another drop down box with choices.And is it possible to link an inserted image from a form to open in MSPaint that when it opens, the image is already there?
View 1 Replies View Related