I need to display a message on a form after a record update has been done depending on whether a table field is ticked or not. If it is ticked I want one message if it is not ticked I want a different message, but here is the scenario.
I have a form and one of the options I have is to call up an address from a record in a table. I want it to display a message to advise whether there is a special requirement for delivery to the address, so in the table I have a checkbox field. If its checked, once the address has been pulled up I want it top advise 'special requirement' or 'no special requirement'.
I need to do this in a macro form, or expression form if possible as I already have an after update macro when that drop down is selected.
So on the dropdown list I have the following on the afterupdate function:
SearchForRecord
Object Type :
Object Name :
Record: First
Where Co0ndition - - "[ID] = "& Str(Nz([Screen].[ActiveControl],0))
That brings up the address from a record in my table onto this form, so what I want is if that record has got a tick the checkboxfield it prompts with a message and ok button.
Why when I set up a macro with a PrintOut action does it always prompt me to "Save As" before it prints? I have a default printer set up in the system, but it still asks to "Save As." It does print after.
I have a database in which the user can select records to print via a checkbox (Yes/No | True/False | -1/0 as the case may be) and then a query that runs through a form to show the list of the records selected with the Print checkboxes as Yes | True | -1.
I want to include a button to change the checkbox for each record from Checked back to Unchecked (Yes back to No | True back to False | -1 back to 0).
Rather than have to Uncheck each individual record, I'd like to have a Macro or Code that will do all the displayed records in one hit.
I have looked at Code and Macro but can't seem to find "Find and Replace" type action that will allow me to do it all in one go.
How to use VBA..... I have set up a simple database to enter data into then upload to a client web portal.
I have a form to enter the data and the table this data goes into has a check box at the end which I want to have ticked/checked/True after I have exported.
I have created a query that shows me all data that is unchecked (not yet exported to an xls)
I have created a simple export macro that sends the query result to an .xls
I want the macro to finish by checking the "export" checkbox once I have done this....
I am using Access 2010 attached is a screen dump of what I have so far....
Im seeking for a solution to prompt all user with windows alert for Notification
Case 1:One staff applied leave and clicked "Submit" , after clicked I want the system will prompt his/her Supervisor for his/her leave approval or like a notification that the Supervisor need to go somewhere to approve (Selected Supervisor)(Maybe the Supervisor need to 7x24 Opening the access database).
I do not have a split db. I am prompted to enter my password when the db opens which is fine. However, when I close the db it prompts me to enter a password (not normal) and when I enter it it says invalid password. Also, when I try to change my password it says invalid password and when I try to compact and repair my db it say invalid password.
I would like a query to run, depending on a date..If the date in [Txt_Date_Account_Opened] is between todays date, and within the last 30 days.do CurrentDb.Execute ("Qry_Append_Units")else a msg box stating "account is not yet open"
I need to add new records to a table depending on what the cbo box displays. I figure this is the way to do it but I it's not working, I have only writen the first select,
Private Sub Comando6_Click() Dim dbPalavraChave As DAO.Database Dim rstchaveCFEPC As DAO.Recordset Set dbPalavraChave = CurrentDb Set rstchaveCFEPC = dbPalavraChave.OpenRecordset("chaveCFEPC")
Here is a project. I have a grid on a form. its width is 20cm wide and 15cm tall. in the grid are 6 groups of columns (all columns listed are from left to right).
Group 1 - 5cm wide - description Group 2 to 6 are 30cm wide and represent days. Each group is split into 8 columns which represent hours per working day.
I need to to draw or position a line over the grid depending on what day it is and time. for example, lets say its thursday at 14.30. ( the 8 hour columns run from 8am to 4pm ) it would need to look like this-
So I need to work out the position of of the line depending on the time of of the day in the week. The day can be determined by the column header, the time by the grid....
I'm looking for VBA code.Basically I have a drop down with 3 options on a form but need it to pull up a window to input depending on which option is selected. One selection of the options if selected will not require the input of data, as it can just input a set value or be left blank (haven't totally figured how I want to display it). With all this I will need it to display on a form in a certain format, in which I would like the drop down value displayed with the data inputted, though with the one option without data just would display drop down value.
I have a checkbox which when checked then turns textboxes to locked as below. However when I navigate to the next record which may not be checked the text boxes remain locked. I obviously want to lock the boxes depending on each record. I am navigating via the windows next/back record buttons. How do i do it?
Private Sub Check44_Click() If Check44.Value = -1 Then serial.Locked = True gain.Locked = True swst.Locked = True Else serial.Locked = True gain.Locked = True swst.Locked = True End If End Sub
I have an option button for a field [Fully Paid] (Yes/No) in my LoanT and i want to know if it's possible for my database to automatically choose an option depending on a calculated field
(Calculated field from another query) = [Outstanding Balance]
Say... if [outstanding balance] is = 0 or negative (refundable), then Yes should be On, if not it should remain No/off so that i wouldn't have to go over every record and manually choose the option
The option button is very useful when i want to display loans which are Paid and/or still active. How do I go about this?
im working on a project , and i need to add a sale and delivery option like a table connected to a member customer with product list and price and in the end put all together in a report. Like a bill.
Just got a new Windows 7 computer and installed Office 2013. I have a report that saves itself as a pdf in a temp folder and then attaches the pdf to an email and sends it out. I use a macro to run the report and everything works fine from there. I have a VBS file that runs the macro and clicking the vbs file makes everything work fine. the code is below.
When I tried to run it though the task scheduler it show as completing fine, but it doesn't. So I added a reference the vbs in a batch file (below) and output the logs to a temp file. After I ran the batch and opened the log I seen the message
I turned UAC all the way down. turn off the virus scanner, and have local and domain admin access. I'm at bit a lose here. I had this working before but can't seem to remember how I did it. This is just one example I have several other reports that were schedule to run overnight, but they basically all use the same code and processes.
When i click a button on the main form the vba code will execute and get the value from the combobox ie TE4700 and locate the macro with the same name ie TE4700 with reports in then it will run the macro and print off the reports.
is it possible to run a macro in access 2010 on close event of a word doc. i want to run an update query when i have sent some email. i want to first make sure i send the emails and the when i have finished close the word doc and then open query [QueryName].
I have a sub form with checkboxes. Each check box represents one of the columns/fields in my query. If one of the boxes is checked, I only want the column that matches with the check box to appear. I have done some research and have came upon the ColumnHidden property.How would one do this in a macro or VBA format.
The front end of the database has a form for each table. Once you create an Audit in table 1 you can create multiple Processes underneath this one audit. Underneath a process you can create multiple Risks...... hence a hierarchy.
I am trying to append data to table 4 - controls. I have copied the format exactly into excel. I have also prepopulated the Audit, Process and Risk data in the required tables.
The reason I want this functionality is to enable team members to populate control information (oftentimes up to 25) in excel and then upload them easily into the database.
The macro I have created will work when created a new table. but when I point it at the existing table 4 - Controls I get the Key value violation error.
enable me to run some code before a button is clicked I want to be able to click a button via VBA code.Basically I used the auto button wizard to make an add record button.To ensure a shed loads of if checks and queries on the entered form data run I wanted to make this button invisible, then make a new button running code not embedded macros to run my checking module then click.
I have some tables need to be imported to Access, which is not well structured. For example:
report 4/05/2014 from SQL server Name ID Add..... aaa 111 bbb 222
To be more specific,I have 4 csv files, that need to be imported into Access.
1. I'm building 4 linked tables so users can update the table as needed. Then run queries based on these tables to produce report. But maybe there's a better way? the file name and location might be dymatic, so anything like 'getopenfile' would be easier instead of linked tables?
2. These data need to be clean up first to become a 'database table'. (Delete first 2 rows, delete some columns, remove duplicates etc.) I know how to do them in VBA Excel, but never used Macro in Access before.
I have a tabular form that lists all the records (address book). I'm trying to have a combo box filter the records by selecting a contact type (employee, supplier, customer). So far I have the contacts displaying in the combo box.I've tried to create a macro that begins "after update". Its an ApplyFilter macro.
Where Condition = [Contact Type]=[Contact Type Select]
[Contact Type Select] is the combo box.
When I do this, a popup box appears. When I type in the item I want, it works. I want this done automatically.
Is there anyway to customize the background of a message box that is brought up via a macro or VBA event? It would be kind of fun to have a stop sign image in the background of a "save and close form" prompt.
