I am getting an error message when printing a 2 part report. It does not appear until I have already printed the first part and I am ready to print the second. I have 6 users and all seem to experience intermittently with the exception of 1 who it is constant. The message is as follows;
"There isn't enough memory to update the display. Close unneeded programs and try again."I have tried deleting the registry "KEY_ CURRENT_ USER SoftwareMicrosoftVBA" with no avail and have installed all available updates from MS.
In the database that I use at work sometimes when we OPEN it we get an immediate error saying out of memory, therefore we close it and reopen and all is good.
This is a problem when the average user logs on as they don't close it, they just continue on and then start experiencing issues.
I thought that the memory was supposed to clear when you close the database.
We run the debugger and no errors are ever found, we also run the compact and repair.
This can happen 1 in 10 or maybe 20 times when we open the database.
I am regularly getting the error "There is not enough free memory to update your display, close unneeded programs and try again"
Access 2013 on a windows 7 machine with 4 processors and 24GB total RAM.
Today I have 14 GB free memory (unbelievable! my first laptop had 136 MB total memory!) when I got this error (Access using 38MB) which makes me believe its not a system memory issue but to do with how much (or quickly) memory is allocated to Access.
I have recently changed computers from a WindowsNT to and XP. When using the NT machine, I am able to print my Access report. However, when I hook up the XP machine and request a report from one specific database, I get the following message....this message also comes up if I try to open print preview or page setup.
"There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable."
I don't think it is a printer error as the error is occurring in this one database. I have successfully printed a test page and can open up other Access databases and print. I also tried converting the database to the 2002 format....but that did not make a difference either. There must be a setting in the database that is causing the error.....
When I print a report from Access, it prints fine. When a colleague does it to the same printer, it misses out lots of letters. Another colleague does it, and it prints fine. The font is standard (Calibri). My IT dept. say it isn't the printers fault. Is it something wrong with my report ?
I have report that i have in preview. In that report i have ribbon that has buttons close and print. Close works fine, with print it goes ok but when "printer selection" comes, i try to change printer it informs that not enough memory. All this code that is in ribbon buttons is in VBA.
What could be the reason for memory stuff or how could this be made that this inform wouldn't come.
Code below: Sub EnnakkoMyButtonCallbackOnAction(control As IRibbonControl) Select Case control.ID Case "MyBtn1" DoCmd.OpenReport "Tuotanto Ennakko", acViewPreview
I've written an application in VB.Net and now I need to transfer the data on textboxes on a form to a report for printing. Only the data on the form is what I want to preview and print.
Im building a new database using Access 2003 SP2 on windows XP SP2 with 1 GB RAM.
When i try to execute the following line of VBA code I get an "out of memory" error:
Form_Confirmation.txtDept = cboDept.Text
Before this line of code I don't query any data or open any DAO connections, Im only checking the entered values in various text boxes and combo boxes on a form. I have also tried rebooting my computer and it still gets stuck at the same line.
What i basically want to do is just move data entered into text boxes on a shipping order form i created and present that data on another form to confirm the entered data. The error occurs when i try to move data from one form to another. The database is still only 1MB with only 5 tables, each with only a few records in them just for testing.
Do i need to install a service pack or download something to fix this error?
I have a multi-user MS Access97 database application. It is causing one of the users (and I have only once had the error message myself) the following error message:
"There isn't enough free memory to update the display. Close unneeded programs and try again."
This error message occurs when the user is doing data entry via the forms and navigating between forms in the database. The form, on which the error occurs becomes oversized and does not display all the information. The user is forced to shut down the database, re-open it, and then it works fine....but eventually the error re-occurs.
I found Microsoft's article 236977, but it applies to working with Forms in Access 2000. This problem is happening in Access 97, and none of the causes listed in the article apply.
Has anyone every come across this....and do you know of a solution?
My problem: There isn't enough free memory to update the display.
I looked all over the internet about this error but without any success.
Facts are:
1. I keep getting this error anytime I try to Print or Print Preview or export to PDF an Access Report (same error for printing Forms and maybe other objects).
2. I received this error when using Office 2007 with the same mdb and also after upgrading to Office 2010.
3. The same mdb on any other computer works perfectly. I can do Print, Print Preview or whatever I want. This seems to be related to this laptop I am using.
4. Resources are not a problem on this laptop: 3Gb RAM, Paging: 1Gb on sys drive C and 2Gb on D. The other machines have less.
I'm having problems with my database. It was on a USB memory stick and suddenly I got a message to format the entire USB memory. I managed to retrieve the files on the USB and loaded them onto anothe USB, but when I tried to open the database I got the message:
"Cannot open database ". It may not be a database that your application recognizes, or the file may be corrupt."
However, when I tried it on another computer I managed to open the database but when I was closing it I got the same message again. The database is working OK, but how do I get rid of the message?
I using excel 2010 and access 2010. I have VBA script runtime error 3011 when running script. It has problem finding access report. First I was passing in as variable with the name. Then I used a script to pull in the report name from access and it is still failing with same error.
Code is shown below.
Private Sub Command29_Click() Dim reportname As String Dim theFilePath As String, FilePath As String, tempStr As String ' reportname = Me.My_DBTableName
I am in the UK and the company i work for moved to Budapest and so did my access database and is now on their server. Today a user in Budapest has come with a problem (see attachment). I really don't understand what has happened here...all the user is doing is clicking on a button, which has a hyperlink to another form, no printing involved at all. One of their colleagues in Budapest can run the report with no problems, do you think the problem is most likely to do with their computer settings...thanks for any responses.
Out IT department updated to SP2 this weekend and about half of my reports are no longer working. I cannot view, print or go into design mode. The error I am receiving is this:
There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable.
As soon as I change my default printer to a different one everything works normally. After talking to our IT department I received the helpful reply:
"Not at this time . This would take a lot of research to see why some reports print vs this one that will not."
After about three minutes of checking all of the affected reports are pointing to one printer. I found a way to manually fix an individual report by opening it up with a new printer set as default, saving the report and then changing the default back to the original printer. The problem is volume, this appears to be affecting about 50 or so reports.
It seems like a driver or network issue, these are network printers, but I do no have the access rights to try and fix this.
Hello every one, it is great to find a place like this.
Please I need help. When I print a form from Access 2000, all the fields on the printed form show #Error, eventhough in the screen the fields show information.
I am receiving the following error when printing different reports to several different printers in Access 2007: "The section width is greater than the page width, and there are no items in the additional space, so some pages may be blank. For example, the report width may be wider than the page width." According to my co-workers this issue began immediately following the upgrade to version 2007 from 2003.
I am creating an access database that holds customer information for a friend of mine. I am struggleing to think of ways to make Access do several tasks.
I have created several forms that display when reletive buttons are clicked and some run automatically using queries, one of which runs a query that displays any upcoming service inervals that are within thirty days of the current date, and allows the user to print a report that is designed to be a service notice for the relevant Customer/s which contains the customers address, phone numbers and service due date with a small pre-made text insert that advises the Customer about the upcoming service recommedation. The Form also provides the ability to print address labels for the same customers, making it quick and easy to send them out by post. The problem that I am having is that I would like the customers information that has already been printed to be removed or greyed out in someway so that the query does'nt print out duplicates but also have the ability to allow user control to reprint any result that may for any reason need reprinting.
I'm pretty new to all of this. I've set up a simple database. I have a form in it for inputting information and then there is a command button on the bottom which prints out a report I've created with the information on it. This is all working great except it prints evey record and I only want the current record printed out.
I've tried the help and it goes into detail about OpenReport and PrintOut in macros. I have no idea what a macro is or what to do with it.
Can anybody please help me and give me step by step instructions as to how to print out only the current record in the report from the command button.
I have a form (entry screen to enter data) I then created a report in the layout I need for my order form. I want to creat a button that a user can press and it will print the current record to the report (order form layout)
Here is my current code for the print button on the form page: Private Sub btnPrtOrderFrm_Click() On Error GoTo Err_btnPrtOrderFrm_Click
The only problem is when I tell it to print if I am on record number 2 on the form, it prints both record 1 and record 2. I only want the current record i am in to print. Any ideas much appreciated
Hi all, i'm having a rather annoying problem. When I view my report I have 2 sets of conditional formatting that run, one that changes the back colours of certain fileds when the criteria is meet, and the second, the text colour of certain fields, both of which work fine when previewing the report. However, when I print the report, any of the back colour in the preview does not print out but text colour does. If I print from another office programme i.e. Word, block colour is printed fine its just seems to not work in my access.
Please note that if the same report is printed from another computer, it prints fine.
Please does anyone have any idea on why this is happening and how to sort it. Thanks in advance for any ideas and help.
I am trying to print a report from a form. Once i enter an order detail i finish off by printing a letter. At the moment we are doing this via a query by entering the order id.
I want to automate this so for the form record i am in i want a button to print a report for that record only.
I know this can be done as i rember doing this in college but i cant get my head round it at the moment.
Hi, Ive read all I can on forums and web and am still unable to print the current forms report using a command buttons on click. This is the code i have been playing with:
Dim strDocName As String Dim strWhere As String strDocName = "Home_Oxygen_Report" 1. 'strWhere = "[general_info.HospitalNumber]= Me!Home_Oxygen_Form!general_info.HospitalNumber" 2. strWhere = "[general_info.HospitalNumber]= "" & Me![general_info.HospitalNumber] & """ 3. 'strWhere "[general_info.HospitalNumber]='" & Me![general_info.HospitalNumber] & "'" DoCmd.OpenReport strDocName, acViewPreview, , strWhere Number 3 gives the closest result but it prompts me to enter the primary key when i hit the command button but i need it to do this automatically. The primary key is a text box not number. Note that the primary key is HospitalNumeber of Table general_info (form and reports record source is query of many tables).
I inserted an image (jpg) in a report, it appears in PrintPreview, but not when I print it on my printer. Please help me. I do not if the problem is with my printer or I'm doing something wrong when inserting the image.
update: It seems to work when printing from Print icon, but does not work when printing from File/Print menu. Is this a known bug?
Problem: I have a databse that is on a network at the office. My users are out in the field using mobile data computers linked to the network using verizon air cards (56.6 kbps modem). Whenever they want to print a report, since the front ends of the DB are on their computers and the back end is on the server, the mobile computer has to send the actual report from the computer over the air card to the server for printing. Each page takes 5-7 minutes before it prints at the office.
Question: Since the data resides in a table on the back end on the server, Is there a way to have the reports reside on the server as well and have the Mobile computers simply send a command to print the report from there so it's not having to send all that information over the incredbly slow air card? Or am I just going about this the wrong way altogether?
I'm not totally up to speed yet on all this computer lingo so please use little words (LOL).
I have a report with one sub-report. It previews correctly and prints correctly from my ACCDB. However, when I create an ACCDE, the sub-report previews correctly and then does not print. I have tried the following and none work: In the main report, deleted the links and changed the subreports record source.
Changed layout for print to no Changed filter on empty matches to no
Moved everything from detail to page header.When I put code in the subreport to set a flag when loaded and queried that flag in the main report, the subreport never admitted to being loaded when run from the ACCDE (again works fine from the ACCDB).
I'd like to print out a report so that each record should be printed into an individual pdf file. When printing manually, record by record, I use an app called cuteprinter for converting reports into pdf. But that one needs saving path for each individual pdf file. What could I do if I'd like to make a series of record printing? Would there be a way of automatic generating path and file name for each record's print?