General :: Microsoft Access 2010 Not Responding When Trying To Filter Columns

Sep 17, 2014

In Windows 8, when we try to use the filter option in Microsoft Access 2010 using the keyboard option (arrow keys), the application stops responding.

The error occurs only if the rows are more than 300. However, using the mouse pointer works fine to filter content.

This error doesn't occur in Windows XP for the same Access database and for same version of access.

We have also tested using windows 8.1 with access 2010.Same error occurs even for windows 8 pro with access 2010.

The error is shown in the screenshot below.

acc.png
access12.png

View Replies


ADVERTISEMENT

General :: Access 2010 - Database Not Responding When Fields Selected

Jan 8, 2015

For some reason our database keeps "not responding" ...

The application stops responding when:A field is selected that has a input mask

A combo box is highlighted (forcing the drop-down menu to open)

Certain buttons are pressed (in fact all but two trigger not responding, why the two buttons are immune)

if I put a break point on a section of code that runs when I press a button (any button, it doesnt matter) and I then press the button which takes me to VBA, to the break point. Then I press F5 to continue to run the code until the function ends (essentially doing nothing, just running the code to the soonest break point I can in the function and then running the rest of the code as normal...) it all works fine again!!!!

I fixed the issue by creating the function:

Code:
Sub aiuewjgaop()
End Sub

saved the database, deleted the function and then saved the database again.

View 1 Replies View Related

General :: Access 2003 Automatically Responding To Prompts

Jan 16, 2013

I am relatively new to Access and I was wondering if there is a way to automatically respond to delete table prompts when running a macro.

Currently I am running a macro that takes about 2 hours, and sporatically asks 'are you sure you want to delete table x'. I have to check on it every 10min or so to respond 'yes' or it will pause the macro. Quite a hassle if I am busy with other tasks and forget to check it.

View 4 Replies View Related

General :: How To Use Automation To Run Word 2010 Mail Merge From Access 2010

Nov 26, 2013

I have a MS Access 2010 application when the User opens form CONTACTS Form

◦User finds single record to be used CONTACTID is identifier to be used for selection
◦User clicks button to open form frm_MAIL_MERGE
◦Frm_MAIL_MERGE has a drop down combo box that reads the folder location where the application resides and displays all .DOTM files (that is all template files) and one more combo box which contains the CONTACTID.
◦User selects single .dotm file for merge
◦Frm_MAIL_MERGE has either drop down to select CONTACTID or UNBOUND data field for user to type in CONTACTID number
◦User enters CONTACTID to be used for the mail merge
◦User selects SUBMIT
◦Application merges selected .dotm file with the information in table CONTACTS for the selected CONTACTID
◦Merged document is saved on the user Desktop as xxx.docx

View 10 Replies View Related

General :: Possible To Have Value In Excel 2010 Cell Used To Update Access 2010 Database

Apr 4, 2013

Is it possible to have a value in an excel 2010 cell be used to update an access 2010 db?

For example, if in a spreadsheet "test" cell A2=3 then in a db "test" a column "value" is 3. However, if the value in the spreadsheet changes so does the db.

View 1 Replies View Related

General :: Calendar Synchronization - Access 2010 To Outlook 2010

Mar 23, 2015

I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?

Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.

View 2 Replies View Related

Forms :: Access 2010 - Form With Combo Box To Filter Data

Feb 6, 2014

I have a modal form with a combo box and a search button.

When the button in pressed, the value of the combo box is the parameter of a query.

Copy and paste of the search button code:

Code:
Private Sub btnSearch_Click()

Dim db As DAO.Database
Dim qdef As DAO.QueryDef
Dim strSQL As String

[Code] ....

I've tested the SQL query produced by the search button and it works, but when I try to push the button, I receive an error on the following line:

Set qdef = db.QueryDefs("qryFilteredData")

View 6 Replies View Related

Reports :: Option Button To Filter Report With Dates In Access 2010

Jun 9, 2014

I have a retort that I want to use an option button to filter the report is a specific date is 48 hours before the current time. I'm not having any luck. Below is the code I have been playing with, but no go.

Private Sub NoMove_Click()
Select Case Me.NoMove.VALUE
Case 1
Me.Filter = "CLM = 'Now() - 48'"
Me.FilterOn = True
End Select
If Me.Filter = "" Then
MsgBox "The filter returned Null"
Else
End If
End Sub

View 14 Replies View Related

General :: Microsoft Access Integration With Whatsapp

Oct 28, 2014

I am would like to build a microsoft access database such as complaint monitoring system.. I could integrate microsoft access 2007 with whatsapp? So that I could deliver complaint calls messages from my access 2007 db to whatsapp chat.

View 1 Replies View Related

General :: Send Email From Microsoft Access

Jun 18, 2015

Ive recently developed in Emailing from Microsoft Access. When I was researching email methods from Access a thought occurred to me that there should be an A.P.I. that would do this the easy way.All of them did have a web A.P.I. which was all I needed to translate a web request from the other language examples given.

Code:
Dim reportName As String
Dim path As String
Dim fso As Object
Set fso = CreateObject("Scripting.FileSystemObject")
Dim oFile As Object
Dim strAttachments As String
Dim strTransPort As String
Dim byteData() As Byte

[code]....

View 5 Replies View Related

HELP!!! Error: [Microsoft][ODBC Microsoft Access Driver] Invalid SQL Statement Expect

Mar 27, 2007

My main experience is with MySQL and PHP so I'm kindof stumbling around in the dark here. Heres my story:

We recieved a new server and migrating from (Windows Server 2000, IIS 5.0, Access 2000) to (Windows Server 2003, IIS 6.0, Access 2003) has been nothing but problems.

I have setup IIS to work with ASP, I've also setup a system DSN. The access file was copied over from the previous server. We're running Access 2003 and now I can't seem to get this ASP script to work.

When I try to upload a file to the script I get this error:

Line: 42
Char: 7
Error: HELP!!! Error: [Microsoft][ODBC Microsoft Access Driver] Invalid SQL statement expected 'DELETE','INSERT','PROCEDURE','SELECT', OR 'UPDATE'.
Code: 0
Url: (URL address blocked: See forum rules)

Here is the part of Connect.asp that errors:

Code:<script LANGUAGE="javascript"><!--var DSNString, TheDF, TheRS;//DSNString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C: hedata estdisbo.mdb;User Id=admin;Password=;";//DSNString = "Driver={Microsoft Access Driver (*.mdb)};Dbq=C: hedata estdisbo.mdb;Uid=Admin;Pw d=;"DSNString = "DSN=testweb; UID=; PWD=";function public_ConToDB(){ TheDF = DP.CreateObject("RDSServer.DataFactory",this.text1.value);DC.DataSpace=DP;DC.Server = this.text1.value;DC.Connect = DSNString;//DC.Connect="d: hedatadisboweb.udl";}function public_GetRS(SQLCommand){ TheRS = TheDF.Query(DSNString,SQLCommand);DC.SourceRecordset=TheRS;return (TheRS);}function public_GetDC(){ return (DC);}//--></script>

Its included in a file called FileRead.htm here is the part that refers to the error lines:
Code: var TheFile, FileStrm;// Retrieved field namesvar M_ssn, M_inits, M_Lname, M_Fname, M_DSSN, M_ruc, M_paycode;var M_normamt, M_payamt, M_pgrp, M_poe, M_pltcd, Payrollnum, Payrolldate;// var Trash, FieldData, FieldNames;var TrashLineNum = 1;// Create the file Stream Object (ReadOnly)TheFile = new ActiveXObject("Scripting.FileSystemObject");FileStrm = TheFile.OpenTextFile(FName,1,false);// Setup the Database Connectionvar SQLCommand, TheRS, TheConnection, DSNString, Commands, MyDC;FieldNames = new Array("ssn","inits","lname","fname","dssn","ruc","cco", "payamt","normamt","notsureone","pgrp","poe", "pltcode","recstatus","paychgflg","paystatuscode", "payrollnum","payrolldate");// Connect the the DatabaseDataLib.ConToDB();MyDC = DataLib.GetDC();// Get Payroll NumberPString = prompt("Enter Payroll Number","025");Payrollnum = parseInt(PString,10);// Get Payroll DateDString = prompt("Enter Payroll Date","20000101");Payrolldate = DateLib.FromMil(DString);// Setup the Database Connectionvar NumRecs = 0;//MyTest = DataLib.GetRS("PaydayUpdate1");alert("About to cross into the CurExtract!!!");MyRS = DataLib.GetRS("SELECT * FROM CurExtract");

I set an alert after this line but it doesn't pop up.

ANY HELP WOULD BE VERY GREATLY APPRECIATED. I'll be checking this very frequently.

Sincerly,
Joseph Russell

View 14 Replies View Related

General :: Microsoft Access Report With Query With Some Data Duplicate

May 5, 2014

so i had created query using query design wizard for which i i needed to enter year of the data everytime the query is being made all my data are correct when just using the query.however when i turning it into report where the query will still be runing and with adding in another field from my original table to get on the montly rearrangement that's where the some record are shown duplicate on the report

View 2 Replies View Related

General :: Rounding To Two Decimals Via Visual Basic (Microsoft Access)

Jun 12, 2014

In my database (access 2007) I have code similar to this

Dim Ulaz As String, Izlaz As String, UkKol As String, UkFin As String

and at the end of the code I have this

Me.NC = UkFin / UkKol

Me.NC respresents avaerage price.

If for result I have 0.498 value, I would like for that value to be shown as 0.50. In another words, it must be rounded to two places.

How can I do that in VB? That value will be passed to NC field on Form, however..

View 2 Replies View Related

General :: Microsoft Access Database Engine Cannot Open Or Write To The File

Jul 2, 2013

I am currently using Access 2010, and have successfully split a database, using the Access wizard.However, whenever a second or third user opens the database - with their front-end database file - they encounter the following message;The Microsoft Access Database engine cannot open or write to the file ". It is already opened exclusively by another user, or you need permission to view and write its data.

I have researched the internet and see that it has something to do with network permissions. I have worked with my IT department and this appears to be resolved!

Is there a setting I need to check in the front-end and/or back-end copies of the databases?Why is there no file name in the error message?

View 6 Replies View Related

General :: Cannot Use ODBC To Import From / Export To / Or Link To External Microsoft Access

Mar 16, 2014

I am trying to create an ODBC link to a copy of the Northwind data base.I am running Win7 on a 64 bit operating system but am keeping office running as 32 bit for Access, Excel , Visio etc due to the fact that I have a lot of old apps tied to them.

When I attempted initially to create a new system DSN ODBC connection it only allowed me to use SQL drivers. (No plurry good) So after some searching I found out that I could use a file in C:WindowsSysWOW64 called "odbcad32.exe" which has allowed me to view /use the total list of drivers to import data.So I can set up a DNS ODBC named Northwind1 and I can access the database without problems using Excel.However if I try to use the same ODBC link in Access to connect to Northwind1 I get the following error message:"You cannot use ODBC to import from export to, or link an external ?Microsoft Access or ISAM database table to your database".

View 2 Replies View Related

General :: Access 2010 And Access 2003 On Same Desktop?

Mar 5, 2013

is there a way to have both Access 2010 and 2003 exist peacefully on the same desktop. My company uses Office 2010, but my department has an Access 2003 application. As a result, I have to have A2003 on my desktop and use it quite frequently for this one application.

I have some small databases that I really want to move onto A2010 so we can take advantage of SharePoint functions, etc. Is there anytning I can do to be sure that the .mdb and .mde open in A2003 and the new .accdb opens in A2010, without getting errors and the Windows installer going through the Office installation process for the respective version? I've gone to the file locations and set the "Open with" setting to the respective version.

View 4 Replies View Related

Access Not Responding

Nov 21, 2007

Hi

Does anyone know how to overcome MS Access not responding error. I am trying to change a Data Type on Access 2003 but the data is large and stops responding. There are about 550 000 records in one of my tables and when i try to change the data type after importing the data, it crashes.

I am using a pentium 4 with 1GB Memory

Thanks

View 4 Replies View Related

Converting From Microsoft Access 2.0 To Microsoft Access 2003

Jul 10, 2006

Hello everyone,

I would like to convert a database, which was made for me, in order to enable it to be used on my current system.

I get the error message below when trying to open the database in Microsoft Access 2003.

The database was made using Microsoft Access 2.0.

Will I need Microsoft Access 2.0 to update/delete the database all the time?

Or can I convert this to be used with Microsoft Access 2003?

I have tried opening the file exclusively and I get the same error.

I have selected Show Help and it advises me to import all the objects from the database into a new database. This can`t be achieved as I can`t open the file to retrieve the contents.

http://images6.theimagehosting.com/error.6de.PNG

Thank you very much for your help and all responses are appreciated,
Sam

View 1 Replies View Related

Converting From Microsoft Access 2.0 To Microsoft Access 2003

Jul 10, 2006

Hello everyone,

I would like to convert a database, which was made for me, in order to enable it to be used on my current system.

I get the error message below when trying to open the database in Microsoft Access 2003.

The database was made using Microsoft Access 2.0.

Will I need Microsoft Access 2.0 to update/delete the database all the time?

Or can I convert this to be used with Microsoft Access 2003?

I have tried opening the file exclusively and I get the same error.

I have selected Show Help and it advises me to import all the objects from the database into a new database. This can`t be achieved as I can`t open the file to retrieve the contents.

http://images6.theimagehosting.com/error.6de.PNG

Thank you very much for your help and all responses are appreciated,
Sam

View 13 Replies View Related

General :: Access 2010 - Status Bar Not Visible?

Aug 15, 2014

I am using Access 2010. I Have the 'Display Status Bar' box ticked in Application Options but the Status Bar is not being displayed.

View 8 Replies View Related

General :: Editing MDB File With Access 2010

Nov 15, 2012

Any issues with using Access 2010 to edit an mdb file..I know there are backward incompatibility issues with 2007 and 2010, but these are both accdb formats.

View 1 Replies View Related

General :: Get Rid Of Dialog Box When Closing Access 2010

Oct 21, 2013

I have a Access 2010 DB. The mainform have a subform with one table alone.

I have a button who close Access when the user are finish on the mainform. Still I have the upper right corner X-button who also closing the app.

My problem is that when the user use the X-button then a dialog box appear and ask for saving the changes for the table in the subform on the main form. The user must then do the choise 'yes' , 'no' , 'Cancel'.

There is no need for this dialog box, (I take care if it's necessary earlier) but I can't get rid of it.

View 12 Replies View Related

General :: MS Access 2010 Cannot Remove Password

Apr 23, 2014

I have MS Access 2010. I cant remove password because when I open in exclusive mode, file, info, there is no decrypt password option.

View 1 Replies View Related

General :: Hide File Tab In Access 2010

Jan 25, 2013

I just upgraded to Access 2010. I was able to solve all migrational issues, but my custom ribbon is showing two File tabs, one that I created and the default access file tab. How to get rid of the default File tab or at least disable it?

View 8 Replies View Related

General :: Access 2010 - Database Only Working In PC?

Aug 27, 2014

I am Using Access 2010 Version. I have created a Database which consists of Linked Tables (from remote Server), Queries and a Form.

I am using Form to search the required Data. Every thing is working in My PC. But, when the Database file is trying to open from my colleague PC. It is not working. I mean, The Form is opening but when I click the Button nothing is happening. My Colleague is using 2007 Version of MS Access.

View 5 Replies View Related

Access Keeps Not Responding When Trying To Run A Query

Jun 28, 2012

in this query, I have about 25 small queries, 3 fields each, each linking to this one big table where one field of each query links to one field of the big table. Whenever I run the query, my program hangs up and I'm eventually forced to force-quit it. Is it because my computer isn't strong enough (it's your typical desk top computer for an office job) or could it be because the servers in which all the access databases are stored on aren't very good networks?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved