General :: Open Report Using Date On A Form
Nov 23, 2014how can open a report using 2 unbound textbox on a form as user input date criteria
View Replies
ADVERTISEMENT
General :: Database Window Becomes Inactive And Cannot Open Another Form / Report
Aug 17, 2014I have just noticed when I open one of my forms . the database window becomes inactive and I cannot open another , form , report etc.
View 2 Replies View RelatedReports :: Can Create A Date Parameter Box Open Up / When Open Report
Sep 21, 2014I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
Open Report With Date Parameters
Feb 27, 2013I need the following report to open with date parameters. I have the following code, but it doesn't quite work.
When an item is chosen from Modl (a list box) a box pops up asking for LowPop, then another for Start Year and then another for End Year.
Those last two aren't doing what they should. They should restrice the [Date] field to between the years entered as start and end. I would like to put it in the "OpenReport" line, but don't think that's going to work.
Code:
Private Sub Command27_Click()
Dim varItm As Variant
Dim ModelWhere As String
Dim strQuery
Dim LowPop As String
Dim SDate As Date
[Code] .....
General :: Report Does Not Open In Preview Mode On Some Machines
May 21, 2014I have a button on my form that should open a report in Preview node.
On SOME users machines, it appears that absolutely NOTHING happens when the user clicks the button. (preview mode)
Report parameters that may have some bearing are as follows. (Default settings in most cases)
Default View : Report View
Allow Report View: Yes
Allow Layout View: Yes
Auto Center : Yes
Auto Resize: Yes
Fit to page: Yes
Pop_up: Yes (This is NOT the default setting, as I would prefer the report to pop-up. If the report does not open in pop up mode, the users tend to close the DB instead of just the report.)
On the user machines where the problem exists, I have turned off the pop-up blocker in their web browser. It seems to work when opening in Report View.
Button Macro parameters are:
Report Name: My_Rpt_Name
View : Print Preview
Filter Name :
Where Condition :
Window Mode : Normal
Environment
SQL back end (ODBC Connection to server)
Access 2010 Front end
I am developing the DB in the bog standard install with no special permissions / add-ons. Also, my developer (log on) account is as a standard user, so there should be no (network) permission issues.
When troubleshooting on the user machines, If I open the report in design view and then open in Preview mode, it works.
Is the problem with the Form or the Macro or the Preview mode or maybe some Reg key that must be changed to allow reports as pop-ups?
General :: Open Calendar Control Replacement On A Certain Date?
Jul 27, 2013a couple of months ago i found a celndar control replacement that Microsoft kindly provided. i have made a few mods that allow me to change the day/week etc. i would now like to tell it to open on a certain date. the reason is that on each of my client records i have 'Future Appointments'. i would like to be able to select a future appointment and click a button that then opens a form that includes the calendar and go to the date of the future appointment. the calendar controls the diary. whatever date the calendar is on the diary matches. so to change to the date of the appointment i need to change the calendar date.
i tried the obvious first.
[Forms]![frmDiaryMultiView]![frmCalendar].Value=#01/01/2012#
that didnt work as the calendar does not seem to recognise it.
i am totally lost with this as i dont even understand most of the code that is behind the calendar, so i dont know what i am looking for to use to open it on a given date.
General :: How To Make A Report Using Crystal Report Direct From MS Access Form
Jun 3, 2014I'v looking for since a couple months a go to make a report direct from access form using crystal report but i havent found it yet. I'v tried this code and its giving me errors. " run time error 1004 method range of object _global failed "
how to make a report using crystal report direct from ms access as front end application ? is it possible to use crystal report ?btw i use database sql server 2008 and MS Access 2007 as my frontend application.here's the code that i'v found and gives me an error
Dim CR As New CRAXDRT.Application
Dim rep As CRAXDRT.Report
Set rep = CR.OpenReport(Range(" ??? ")) * i getting error in this line, what should i do to fill it ??
rep.ParameterFields(1).AddCurrentValue "Boston"
rep.ParameterFields(2).AddCurrentValue "Cars"
rep.Database.Tables(1).SetLogOnInfo "tool", "db_tsel"
rep.ReadRecords
rep.PrintOut promptUser:=False, numberOfCopy:=1 ' promptUser:=True doesn't work
Open Report On A Form With A Button
Feb 8, 2005Good morning All,
I have a form with a command button to open a report ( based on a query ) for the currently displayed record. here is the code I have used:
Private Sub CS_notes_Click()
On Error GoTo Err_CS_notes_Click
Dim stDocName As String
stDocName = "InternalSNwithRMAprodMASData"
DoCmd.OpenReport stDocName, acPreview, , "TLAUnit = " & Me.UnitSN & "'"
Exit_CS_notes_Click:
Exit Sub
Err_CS_notes_Click:
MsgBox Err.Description
Resume Exit_CS_notes_Click
End Sub
I believe this came from this forum sometime. When the button is clicked I receive the error:
"Syntax error (missing operator) in query expression '(TLAUnit = 26712B')'
TLAUnit is the report field, UnitSN is the form field.
Any help with the error?
Thanks
Kevin
Open Report With Record From Form
Jun 16, 2005I hae a button on my form to open a report. However, I get all the records in the database when I only want to see the report with the current record from the form on it. How do I narrow my report?
View 9 Replies View RelatedForm To Open A Report With Options
Nov 10, 2006I need to create a form that will open up to a report. the form is going to have two options.
one option will open up a report that will show all candidates submitted
the other option will open the same report but only show the candidates that have not recieved a no from the employer.
does anyone know what type of coding will need to go into this and how to go about it.
any help would be greatly appreciated.
General :: Date Is Incorrect In Report View
Jul 6, 2015So I have to text boxes, one for month and one for year. Below is the control source for each box. When I go into Report View, I get January 1905....This is definitely NOT January 1905....I've checked the date on my clock, it says today's date...
=Format(Month(Now()),"mmmm")
=Format(Year(Now()),"yyyy")
Open Form Command Button Fills In Text And Date Fields From Previous Form
Apr 27, 2005I currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
Reports :: Open Report From Information In A Form
May 28, 2013I have a Table with Emp_ID and Details of my Employees. I have created a query and set parameter [Enter Emp_ID]. When I pull up a report, I get a pop-up and it asks me for the Emp_ID. When I input same, I get the information I need. Everything is good so far...
My Question... I have designed a report when user will need to enter Emp_ID and click on a button and they will get the report "EMPReport" without having the pop-up window asking for EmpID.
I have been using the below code but I get the pop-up again and I need to enter the Emp_ID again to view the report
See below Code:
Code:
Private Sub Image11_Click()
If IsNull(Me.Emp_ID) Or Me.Emp_ID = "" Then
MsgBox "You must enter an Emp ID.", vbOKOnly, "Required Data"
Me.Emp_ID.SetFocus
Exit Sub
End If
DoCmd.OpenReport "Rpt_HR1", acViewPreview, , "[Emp_ID]= " & "" & Me!Emp_ID & ""
End Sub
Macro To Open Form When Report Is Selected
Sep 16, 2014I have a report that is based on a query. The query has filters in it based on user info entered from a form. So the form asks the user to select which division of the company, and the date range for when the info applied to. My issue is that I am trying to set a macro that opens this form whenever some tries to open the report.
But the macro appears to run the query before it opens the form and it gives me a generic message box asking for the division. After I type that in (instead of selecting from a drop down list like I have on my form) another window pops up asking for start date, etc...instead of opening the form I created. What am i doing wrong and how do I get the macro to open my form? If I open the form directly and enter the criteria, it runs the report correctly.
General :: Modal Form - Open Concrete Form And Pass Value To Control
Jun 21, 2013I have modal form - frmZlecenia
I would like to copy one control, then close this form, open concrete form and pass value to control.
My code is
Private Sub Menu_Click()
DoCmd.OpenForm "frmZleceniaMarzenaNawigacjaPD"
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie = Me.Imie
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie.SetFocus
DoCmd.Close acForm, Me.name
End Sub
The problem is, still opens the previous form, not form "frmZlecenia"
e.g If I open form x then from this form I open my modal form "frmZlecenia" and then I will click "menu" button - now form "x" is open :/, but should be "frmZleceniaMarzenaNawigacjaPD"
There is some way to open concrete form from modal form?
General :: End Of Month Report - One Record Per Date Limitation
Aug 20, 2014I have a form that supervisors use to input employee accountability for each day. Once supervisor completes the input, a command button is selected and records are appended to an archive table and then deleted from the "live" table. End of the month, reports pull from the archive table to tally absences.
The problem: when a supervisor submits the daily status report but resubmits the report do to an input error I now have two records for the one reported date.
How do I pull the end of month report without including an earlier record for a duplicate date? Is it possible to have access overwrite any records previously submitted for that day?
Forms :: Open A Report With The Results From A Filtered Form?
Nov 25, 2014I want to open a report with the results from a filtered form.
I want to use a similar format to the attached Allene Browne search2000 as the base to filter the records initially, but not sure how to get the filtered results into a report and the most efficient way.
General :: How To Open Another Form Keep Recordset
Jun 30, 2014 I have three tables see below
tblplantitem
tblplantgroup
tblplantservice
so I have frm called frmplant which holds the plantgroupname I.E plant type (airblow,leads) then I have subform call plantitemtblsubform which holds the plant item serial number, value ,service date which works great now my problem I have command buttom on subformplantitemsubform then opens form call frmpopupPlantService this opens to show plantitem service history but when I add a record then save close then click the same plant item to open form frmpopupPlantService show no service history even when I just entered ...
Modules & VBA :: Open Report With Subreport Based On Unbound Form
Apr 14, 2015I am trying to open a report (rptGMX-IRG) that includes a sub-report (srptRG) based on criteria that is set with two unbound fields on a form (frmGMXbook). This form has two dropdown boxes (cboGMX_No & cboMachSize) and a command button. The first dropdown box includes data located in the main form and the second dropdown includes data that is part of the sub-report.
I can get the report to open properly when I enter data into both fields on frmGMXbook.
However, the problem I am having is the inability to have one or both fields be "Like '*'" and show all associated records.
Here is the code I have on the command button.
Private Sub GMX_Preview_Click()
Dim strCriteria As String
If IsNull(Me.cboGMX_No) Then
strCriteria = "[cboGMX_No] Like '*'"
Else
strCriteria = "[GMX_No] ='" & Me.cboGMX_No.Value & "'"
[Code] ....
Reports :: Open A Report But Only Showing The Result Of One Record In A Sub Form?
Jun 21, 2013i want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
Reports :: Using Command Button In A Form To Filter And Open A Report?
Jun 26, 2014I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:
Code:
Private Sub FilterReport_Click()
DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'"
End Sub
Code:
Option Compare Database
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = Me.FName
End Sub
"FilterReport" = Form Button
"Report" = Report
"First Name" = Report Field
"FName" = Form Combo Box
Modules & VBA :: Open Form Where Clause With Date
Jul 21, 2015I would like to open a form to a specific date that is taken from another form. Date field format is short date and looks like yyyy.mm.dd
I have figured it out that it only works if date format is yyyy/mm/dd
I know format function can do this, but i do not know how to write the code with correct syntax.
For example i have tried:
DoCmd.OpenForm "TreatmentsTB1", , , "DOV= #"& Format(2015.01.11,"yyyy/mm/dd")&"#"
it does not work.
General :: Timesheet Manager - Report Based On Date Range Given By User
Jul 7, 2014I have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
General :: Open A Form Through Combo Boxes
Sep 19, 2013I have designed a main form which have buttons for about 30 different companies name to open, each button opens an individual company form. Now the companies list is growing day by day so i want to create a combo box which select the company name and open the relevant company's form.
Do I need to create a table which lists all the companies and then add a combo box on a main screen which select the company name and open the form but i need a VBA code for that.
General :: How To Get The Form To Open First Then Populate Grid
Sep 4, 2012I am struggling with a slight form delay. When it opens on the OnOpen event, i am populating a grid. This takes about 3 to 5 seconds but, the it also takes the form the same time to open. What i need to do is get the form to open then populate the grid. Can i make the form open first then populate?
View 4 Replies View RelatedOpen A Form Based On Date Of Another Form
Nov 29, 2012I am trying to open form Cap Nan Form based on date in text box off another form Upload Form and got no result. Second form ( Cap Nan Form) is opened but no shows no record.
The code vb I use the below:
Private Sub OpenForm_Click()
On Error GoTo Err_OpenForm_Click
Dim DocName As String
Dim Criteria As String
DocName = "Cap Nan Form"
[Code] .....