i have some combobox which shows the column shown into the subform. i can filter the subform using the comboxes. now i need to build an instant report based on the current filtering. i can filter more or less. but i need the current position of the subform into a report.
I am trying to print a report based on the filtered results of a form where the data record source is generated from a query. What I have is five unbound comboboxes on a form that filter the results of the query on a subform which works fine in whichever combination I set, I then want the report to print out the results of the filter and the filter combination that I used - basically exactly as it appears on the form (I have used the same query / subform in the report with text boxes to show the filters used on the form). My VBA skills are quite limited (but improving!) and I have trawled the web trying different code examples but can't seem to get it nailed. Current filter code follows;
Code: Option Compare Database Option Explicit Private Sub PrntConfigReport_Click()
I am trying to build a newer database 2010, based on an older one,2000, that has been locked tight and I cannot see the modules to kinda get a reference of where to start. I am trying to find a VBA code that will allow me to import a several text files to one table. The text files are all in the same format but I cannot remove the page headers and footers to get the table to look right. I have attached an example of the text file i am trying to import but it is a stripped down version for information protection.
Also, it appears in the old Database Table once imported as:
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
If I could import the text files and end up with a table like this, it would be all i need as i could run all the queries i need from this.
Here is my problem: I have an Access database that contains a table with three columns (A & B & C). Field A is for code values and field B is for the value for that particular code. Field C holds the case number. I have a folder that contains the information for over 5000 case numbers. Each case number needs to be placed inside of the table. Considering there are 5000 case numbers, I dont want to use the import wizard 5000 times.
Furthermore, the text file only has two columns (for A and B).
I am trying to create a VBA that will append rows to the table by going into each file and placing the information into the table. The first row for each file contains the case number. So when the VBA runs, it should open the text file get the case number from the first row (field B on the text file) and place that in the case number field of the table for the entire file; and then repeat this action for all of the files in the entire folder.
Any help that can be provided will be greatly appreciated.
I have parameter form that ask for state and begining date. on click it runs a query and creates a report by state that has multiple pages.. I want to create a separate pdf file for is page (which would be by delegate_name).
This is the coding I have so far and am gettting the error '424' object required. This is the coding I currently have. I haven't worked with access in over 9 yrs so am a little rusty with it.
StateAbb = Me.State PeriodStartDate = Format(Me.Period_start_date, "MM-DD-YYYY") Dim strSQL As String Dim db As Database Dim rs As Recordset Dim strRptName As String
I have an excel spreadsheet, that has a long list of names and unique numbers (of medical lab results)
I have another folder which has many text files (the actual lab reports), each of which has a file name that corresponds to one unique number in the excel spreadsheet.
How can I import the content of the text files into a single memo field (e.g. "LabResultContent") in the original datasheet?
I have a table that has over 6000 rows with two columns. One a title and the other a memo column with transcripts from interviews (some being extremely long). I do research using content analysis and to do that on these interviews, I need each one saved in its own text file.
Specifically I need to export each transcript into its own text file and save that file using the title from the other column. So I would end up with over 6000 text files all being saved using the title from the corresponding row as the transcript. Is this even possible?
i'm in the process of creating an Access database to import data in text files and then export the data as fixed width text files, this is now working fine
My next step is to be able to setup an "Archive" Table which will hold all the data i have imported across multiple import proceudres for the last 30 days, i then want to be able to "De-Dupe" any files i import against this to ensure i never load duplicate data.
Lets say we have 100 documents. 30 of these documents contain the same exact set of instructions that i want to update/change. what options would i have that would allow for this 'mass update' so that i can change that specific instruciton and every document with that line would be updated to reflect it?
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title Department Header Supervisor Header Group Header Detail Department Footer: Totals Report Footer: Overall Totals for all departments
Here's my question. I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I am in the learning phase for MS Access reports. I have a datasheet which contains the employee daily activities.I need a report when either or both criteria is selected. For ex..criteria1 is Start date and End Date and criteria2 is Employee Name.Output of the report should be based on the selection of the criteria ,as I said either or both.
I have a database which have tbl1 with field admission year with data like august/2007, august/2008. i have entered all data with form1. My problem is that i want filter report. user click a button so a form opened and than he entered data in a text box like august/2007 when he click on show report button only those pages which have august/2007 text will display in report. second time when user change text like august/2008 in text box report also show changes.
I have the following code which i found on another thread on this forum (thanks to original author) which is attached to the On Click of a button which prints the report corresponding to the details displayed in the form.
Dim strCriterion As String Dim strMsg As String, strTitle As String Dim intStyle As Integer
This works fine, however, i need to be able to select the report based on more than 1 criteria. For example, the Reference Number can be repeated but is distinguishable from each other by an Issue Number i.e. ReferenceNumber = 93, Issue 1 or 2 etc. At present when i run the above it prints all versions of, in this case, reference number 93, which given that each report is only a single page isn't a show-stopper but it would be nice to have it working as i would like.
I have tried adding to the strCriterion line such as strCriterion = "[ReferenceNumber]=" & Me![ReferenceNumber] and "[IssueNumber]=" & Me![IssueNumber] but no joy. I have tried bracketing the whole line and variations thereof, again no joy.
Can anybody tell if what i am attempting to do is possible and if so how do i go about it?
I have tried the above coding using MasterID which is the Autonumber PK but it produces an "Enter Parameter Value" box for MasterID. Obvioulsy if i can get it to work for the Autonumber then my problem goes away but i can't seem to figure out why it works for Reference Number (Number) and not MasterId (Autonumber)?
Okay I have a report (rptHorneOstbergQuestionnaire) that is based on a query (qryrptHorneOstbergQuestionnaire). In the report I have a total (HOTotal) which is the result of an expression created in the qry. Based on this result I would like to generate text in a text field (HOType) that is found in the same report.
Basically if the field HOTOtal shows any vaue between: 16 and 30 then I want the unbound text field to show the text Definitely evening typw and so on ...(see case statement below)
I thought I could do a case statement on report open but I am getting an error that my expression contains no value.
Here is the case statement
Private Sub Report_Open(Cancel As Integer)
Select Case Me.HOTotal
Case 16 To 30 Me.HOType.Value = "Definitely evening type" Case 31 To 41 Me.HOType.Value = "Moderately evening type" Case 42 To 58 Me.HOType.Value = "Neither type" Case 59 To 69 Me.HOType.Value = "Moderately morning type" Case Else Me.HOType.Value = "Definitely morning type"
I am having problem on formatting text on a report based on a Yes/No field using Conditional Rules Manager in Access 2010. When adding a rule [field name] = Yes the font color does not change. I have tried setting the expression to [field name] = True and still does not change the color. Adding a Yes or True in query works OK.
I have a form with a command button that runs a report. I have been asked to modify things and if the data in the text box is "A", run report "A". If the data is "B", run report "B" and so on.
Is there a way to have a text box filled out based on the value of a field. There will be only 2 possible phrases for the text box.
=IF( <Expr> Forms![Workorder]![Disposition])=("Return As Is","DISAPPROVE","APPROVE")
This is what I have tried but I get syntax error.The form is Workorder and the field is Dispostion. When the Disposition is "Return As Is" then I want to have the text box yield "DISAPPROVE" otherwise it should be "APPROVE".
I have a select query that holds anywhere between 1 to a couple hundred records, I need to take the Name field and populate a textbox which after verification I write to a text file that I later use in a powershell script. So far have tried using VBA to create a variable and populate the textbox based on the string but it only provides me the first item, I've tried dmax and this gives me a single result last Item, Dlookup only gives me the first item, changed it to a listbox which populates the box correctly but only writes the selected item in to my text file.