General :: Resurrection Of A Search Form Added Functionality
Nov 17, 2014
About a year ago I created a search form based on Allen Brownes Search model. Working fine, but the user wanted added functionality, see here, after a few tries the users didn't wanted the option anymore because they were in a hurry to deploy. But now their management is asking again for a wider scope in that state search.
I made an example model. It works fine, but only if I always have some value in the [State C] option, if left blank it won't work, a Run-time error 3075, will pop up.
I have tried many combinations of parenthesis, but, haven't got any luck.
View Replies
ADVERTISEMENT
Dec 17, 2013
I'm using Allen Browne's search form in an application for demographic purposes.
The form is working fine, but the user is asking for a new functionality. He wants at lease 3 state combo boxes so he can filter that [State] field for at lease three choices and the way it is build now he can only have one. I tried the following code (with the corresponding text boxes in the form), but it didn't, the result was no search at all.
Code:
If Not IsNull(Me.txtState01) Then
strWhere = strWhere & "([State] Like ""*" & Me.txtState01 & "*"") AND "
End If
If Not IsNull(Me.txtState02) Then
strWhere = strWhere & "([State] Like ""*" & Me.txtState02 & "*"") AND "
End If
If Not IsNull(Me.txtState03) Then
strWhere = strWhere & "([State] Like ""*" & Me.txtState03 & "*"") AND "
End If
In the Allen Browne's documentation he explains about using the AND and OR's and I tried a few combinations, but the result this time was no record found at all.
View 2 Replies
View Related
Jun 25, 2013
I have a search box running the following code on After Update. I would like the search box to use a contains functionality instead of its exact nature currently.
Ex. "Address Number" could be found by typing "Num". Currently I have to type "Address Number" in full exactly as it appears in my table.
Code:
Private Sub txtSearch_AfterUpdate()
With Me.RecordsetClone
.FindFirst "[QstnText]=""" & Me.txtSearch & """"
If .NoMatch Then
Beep
Else
Me.Bookmark = .Bookmark
End If
End With
End Sub
View 3 Replies
View Related
Apr 6, 2015
Is it possible on the Find Record button added to a form to adjust the search function so it defaults to a specific box on the form? I have a form for tracking employee's and on my Find Record button I would like it to default to the Last name instead of the Record number.
View 3 Replies
View Related
Nov 2, 2005
I have a form that imports an excel spreadsheet and manipulates the data into a database friendly format. My issue is that I have hard coded the test file name in the DoCmd.TransferSpreadsheet command.
What I would like to do is to allow the end user to go and click on the file and then have access pick up the file name and run the process. Is there some Active X control that allows the user to go search for the file they want to import? If so, is there any functionality to such a tool whereas I can have the user click on the file and instead of opening it, I can simply capture the file name to use in my module?
OR… does anyone have a better idea of how I might go about what I am trying to accomplish? I hope I explained my situation clearly enough…
Thanks
Gary
View 3 Replies
View Related
Jul 17, 2014
I have a database created in Access 2003 about six years ago. I’m the sole user of the Application, which I use to keep track of my personal assignments and to quickly access other resources. A search form was added and tweaked over time until it contained the features I desired. The search form uses a subform to display a list of records, with the ability to click a record‘s "Edit" field to open and update that record.
In about March 2014 we upgraded from Office 2003 using Windows XP to Office 2010 using Windows 7. All users on other Applications that I’d designed and support experienced missing Reference issues, but those were resolved rather quickly. I'd been off work intermittently for about six weeks between April and July and gradually started noticing other issues with my personal assignments tracker that I did not immediately associate with the upgrade. Early on, I noticed that I could no longer delete or rename database objects on several of the databases that I'd designed and support. Eventually, I also noticed that I was unable to create new records and received SaveRecord error messages associated with the subform. I'd encountered SaveRecord issues before and went through previous steps to resolve, but to no avail. Eventually, I came to the conclusion, right or wrong, that all of my recent issues were associated with the upgrade.
I found through online research that my loss of ability to delete or rename Objects was possibly due to the loss of Object Owership and Permissions, which was associated with my Security Workgroup. I confirmed that Ownerships and Permissions had been lost and was unwilling to recreate the database, just yet. No user of other Applications that I support reported any problem creating new records.
I know now that new Access doesn’t have the Security menu item that allows Workgroup creation and joining. After months of online research and trial and error, I was directed to Microsoft Knowledgebase Article 918583, which provided VBA code that allowed me to Run the Workgroup Administrator to rejoin my previously established Workgroup.
After rejoining my Workgroup, everything seemed to return to normal. I could delete and rename records and was able to create new records. After a few days, I noticed that new records were not being displayed in the search form right away. I confirmed that the records were being added to the main table, but still not available in the search form, queries, or reports until after an additional record had been added. In other words, for example, in order to view record 1, a record 2 would have to be added. In order to view record 2, a record 3 would have to be added, and so on. This makes it very tedious to enter new assignments.
I believe the present issue is greater than my search form, because the newest record is not only not available in the search form, but not available in any other form, query, or report. I have no clue where to start.
View 2 Replies
View Related
Jun 25, 2014
I have a form that lets you add records to my table, it works well and I can see the records in my table but then once I use my search form, which also is working well, the new records won't come up when I do a search, it just keeps searching through the records that were there when I created the search form.
View 4 Replies
View Related
Oct 13, 2015
Basically I have one table with all relevant information needed, etc, and I have the original spreadsheet data inputted to the database. The original data appears fine when a search is done, eg, the user searches for something using a form that then uses a query and ultimately brings up the information that matches. In the queries, I use the same basic criteria
"LIKE "*" & [Forms]![FormName]![FieldName] & "*" "
My question is, now that I have a form to add a new record to the table so a user can add to it, what would be the best way to get the added record to appear during the search, like the original records? I have used " IS Not Null" at the end of the criteria within the query, but it tends to bring up all the new records no matter what the user searches.
View 3 Replies
View Related
Jan 31, 2013
how to create file explorer like functionality in ms access.
1 -I need to be able to browse files within specified directory and only. I can't alow users to browse any other directories.
2- I also need to be able upload (copy/paste) folders and files in that directory
I looked at different solutions and found a solution which might work on this foum link below.
---access-programmers.co.uk/forums/showthread.php?t=102667----
The treeview working for browsing specific directory, but i need to enhance it to allow to copy files and folders in that directory.I use MS ACCESS 2010 and not very proficient in programming.
View 5 Replies
View Related
Mar 29, 2015
I need to find out what has been added to a table and then add that for each record I have in a stringed list called "lstTasks". This is the scenario.
I have a table of file links with multiple entries for TaskId. As I enter a procedure I need to get a list of all file links for TaskId = 1 Then after the procedure does it's stuff I need to check all file links for TaskId = 1 again and if there are more records added, I need to add those records for each id in the stringed list "lstTasks"
The tables are in MS Sql Server.
View 4 Replies
View Related
Aug 20, 2013
just building my first database. Eventually I want to make it open to others/make changes as new research is done. Can I add change-tracking etc. later (perhaps once I know ANYTHING about code etc.). Basically - can I worry about that later, or--like structure etc.--does it have to be set up before I can enter any data to begin with?
(for the initial part in which I am the only one using the db I was planning on just having it stamp the date of the original entry)
View 5 Replies
View Related
Feb 19, 2013
I have 2 sub-forms attached to a main form. Each of these forms are based on different tables. Whenever I input the record, it goes into respective tables. However when I try to delete the record, it only deletes the record from the main form. I tried cascade delete. However, since referential integrity has to be established, I cannot add the record to my subform because there has to be a corresponding record in the parent table for me to add the record in the subform.
View 2 Replies
View Related
Jun 22, 2012
I did a search in here as well as Google to figure out why when I relinked the front end to the back end after adding 2 tables to the back end that the tables did NOT show up on the front end. Only the original tables that I began with.From what I have read there are different ways to do it. One suggestion on here was to create the table on the front end and export it to the back end. I guess I will have to do this going forward.
But my question is, after searching pages upon pages with no luck, since I already have the tables in the back end how do I tell the front end to find them and link them?
View 2 Replies
View Related
Nov 3, 2014
I need a calendar that can go forever that shows weeks and not months and each record i add (or is added by admin form) will show up. I have a calendar attached here to show what i mean but its monthly not weekly.
Basically it needs 7 spots for employee vacation leave, 2 spots for supervisor leave and 2 spots for other leave. My current calendar will only fit the 7 employees and no1 else thus the reason i want to go weekly and not monthly, so it has more room.
View 1 Replies
View Related
Jun 11, 2014
How to create messagebox to alert when I open form that have a new record added , and if it can count No of new record ? could it be possible?
View 3 Replies
View Related
Oct 17, 2013
I need to export a table to a .csv file.
One of the fields in the table is "Posting Date". Data Type: Date/Time. Format: Short Date
All records in this field are dates. Format is "dd/mm/yyyy". None of the records include a time.
When I export the table to a .csv file, the time is added to the date. So the exported result is "dd/mm/yyyy 00:00:00" e.g. 17/10/2013 00:00:00
I am exporting the table using "delimited" format in the wizard.
I cannot use the fixed width option.
How do I prevent the time from being added?
View 1 Replies
View Related
Aug 19, 2014
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
View 1 Replies
View Related
May 18, 2013
Id like to create a search field on a form, with a similar function to the standard Access 'find and replace' function. Only id like it to be alot more simple than the Access find and replace form.What i have is a Asset DB for the IT assets in the company i work for. We have a lot of phones, printers, computers and about 120 Laptops. The laptops are quite often reconfigured and given to new users, so the laptop details dont change but the user and software config does. I need to keep track of what software is installed where, for licensing reasons.
What i have is a simple form with the laptop name, serial number, operating system, software, location etc etc. What i would like to be able to do is, type a laptop name into a Txt field, hit a search button, then have the fields of the form populated with the laptops current config and then be able to edit the details from inside the form. ive tried using a combo box but i have more than 20 fields that need filling, so anybody whos used the 'me.txtboxname.value = me.combobox.column (1)' may know that you can only use 20 columns.
The default Access 'Find and Replace' system works fine but i dont want users to have to use it. I also dont want them to have to navigate through records using record selectors.
View 5 Replies
View Related
Jul 28, 2014
Just wanted to confirm which is the best way to create an automatic back up of a access DB. (Split DB, backing up the BE - Access2010)
Firstly I was thinking of just creating a batch file to copy the file to a new source directly with a task scheduler set up.
Ideally I'd like it to run daily and have the date of the back up added to the end of the filepath.
View 5 Replies
View Related
Sep 28, 2014
In my Access app I need to get the latest record added of an item from a MS Sql table and check the period between now and the date saved in the record.
So my guess is:
Select TOP 1 * from tbl_StockItems
Where StockId = Loc_StockId
I then need to check the days between tbl_StockItems.LastStockDate and Today.
How would I write an Access VBA query to give me the amount of days and put that number into a variable.
View 4 Replies
View Related
Feb 7, 2013
I'm developing a program to search several fields. One of which is a memo field with large characters. Using wildcard in the search form I made, it only returns the record if the first word of the field is typed in the search box. I want to type any word in any part of the field to return the record.
This is my code
' Check for LIKE Subject
If Me.txtsubject > "" Then
varWhere = varWhere & "[subject] LIKE """ & Me.txtsubject & "*"" AND "
End If
subject is a memo field.
View 5 Replies
View Related
Jul 22, 2013
putting a search button on a form on my database.
On the navigation buttons at the base of the form there is a search facility where I can type a record id but I would like to get rid of that and search records either by turning the ID field into a searchable box or by adding a button where I can press it and get a search box up.
View 1 Replies
View Related
Oct 7, 2013
I would like to make a search box and update my form with the person's data from the search box.
View 5 Replies
View Related
Jul 8, 2013
I am creating an access database to store customer details as well as quote information. I have created a form to input quote details that our office can complete when a customer calls to complete a quote. I need to create a form that opens as a new form every time we click on the form to input a new quotation. How do I do this? At the moment when I click on the form, the form opens but the details of the last quotation are stored on the open form.
I have no training in access at all and am self taught so far so by no means an expert.I also want to create a form that allows you to search for particular quote numbers, so if someone calls and asks about a particular quote number we click on a page that says 'search quotes', input the quote number and the form opens with all the details of that quote.
View 2 Replies
View Related
Mar 21, 2013
[URL] ....I am trying to dynamically search multiple fields from a combo box on a form that includes a subform. I am using code from the above referenced link within this forum.
It works without the "setFocus" for the Listbox except it jumps to a record after the very first character is entered instead of narrowing down as characters are typed. If I leave in the "setFocus" I get run-time error 2110.
View 14 Replies
View Related
Feb 23, 2013
i orginally thought i should do this in excel but i think when the dataset becomes larger and i want to eventually get it on the web - i thought its access i need?
i have created a mini dataset as an exmaple of what im trying to explain..i have in first column the objects, and columns after this are the elements needed to make the object (i have just labelled the element titles a b c etc - there will be LOTS of elements once i get the dataset created). so if i had a red blue green cream elements - a search would bring back both lights and lamps that i am able to make.
object A B C D E F G H
lights red blue green cream
lamp red blue green cream
garage red blue green cream yellow brown purple pink
house orange white green blue red black
garden orange white green blue red
garden house orange white green blue red
is there a way of creating a search lookup to this kind of information? a form which you type the criteria in and it brings back what you can make? if i was one element away from an object could I use a wildcard function to say, if you had black you could make a house?? etc
View 3 Replies
View Related
