I have a list box with 3 columns and one line on my form and am writing an update query that is to use the value from the first column of the query to update a record in a table. I have referenced the list box as ListBox.Column(0) but the code displays a value of null when I run it and the record that is to be updated is updated to Null (it is blank). How do I write the code so that the value that is in column 0 of this list box is passed through the code?
I have a listbox on a form that looks up a table to to allow me to pick a stock location. The table only has 2 colums in it, the Primary Key Field (ID) and the Store location. When using this in a a form instead of getting the Stores Location, all I get is the ID. I have tried changing the Bound Volumn Value and the Column Count Fields, however no change.
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code: sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _ " FROM ActivityLog" & _ " WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _ " ORDER BY ActDate;" 'MsgBox sqlstatement Me.EditPOListBox.RowSource = sqlstatement sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
I'm still a little new to this, so please bear with me. I've searched to no avail for what I am looking for, so if there is an existing thread and you would rather point me in it's direction as opposed to answering my question, that would be fine.
I want one of the parameters of my delete query to be only the first column of my "ProdList" listbox, but don't know how to specify this. This is what my query looks like so far... Can someone tell me how do i need to change it?
DELETE ProductionLog.Username, ProductionLog.Date, ProductionLog.OrderNumber FROM ProductionLog WHERE (((ProductionLog.Username)=fOSUserName()) AND ((ProductionLog.Date)=[Forms]![Production]![TheDate]) AND ((ProductionLog.OrderNumber)=[Forms]![Production]![ProdList]));
I was wondering whether there is an "easy" way to make the column widths of a list box to adjust to the largest peice of data under it.... without filling it in yourself in the design view... So in VB....
I know that there is the property COLUMNWIDTHS, and that you can adjust it by calling that property..
But how to make it the column width to adjust automatically to the largest piece of text in that column??
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = "," For Each vItm1 In Me!LstArchive.ItemsSelected stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1) stWhat1 = stWhat1 & stCriteria1 Next vItm1 Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function In('00638','00639').
Any help or pointing in right direction would be very much appreciated Carrie
I have a listbox and all is well - the only problem is that the column heads are a little 'ugly' - my column names are usually something like 'catagoryName', 'productType' and 'price' instead of looking pretty, like 'Catagory Name' and 'Product Type' and 'Price' respectively.
Is there any way to edit/format the title/column heads without having to change all the tables and queries etc, so they look a littler prettier?
I was wondering if a list box can be made so the header of each columns is clickable.. so you can sort by that column either alphabetically or numerically?
In short, I have a form that has a combo box containing people type values. Then two text entry boxes, firstname, lastname. Then an add, update, and delete button...
When the person type is chosen from the cbo, and the names are filled out, and the 'add' button pressed a query sends the values back via sql insert, and a listbox next to these controls then lists the new person records. Great - No worries...
Then, when someone wants to update the record now shown in the listbox, on double click of the record in the listbox, vba repopulates the name text boxes from the listbox's columns values (easy), and then *magically* the person type combo box chooses amongst its values the value stored in the person type column from the listbox.
I can't get the combo box to be set to the value that I am grabbing from the listbox's column values.
Part of me wonders if I would have to program in a way to search among the combo boxes values and find out which one was selected from the listbox, find it's index value and then set the combo box to be that index/value record... but that seems like a hard way to do it... and I'm not exactly sure how?
I wish to generate a new query consisting rows that I have selected in a multi colum list box. May I know if it is possible to work? I am totally lost now
This is the function i'm using for summing a listbox column:
Function TonSum() As Variant Dim I As Integer, J As Integer, ctl As Control Set ctl = Me.lstDrivera2 J = ctl.ListCount - 1
[code]...
The problem i have is if one the records in the listbox doesn't have a value (is null) then Access gives me a 'Type Mismatch' error. How to treat the null value so it excludes it from the sum?
I hope I'm posting in the right place, I've been trying to solve my problem using queries so I thought it might be appropriate here. I have a database for a health care service which contains among others the following four tables...
Table 1 contains client details, primary key [ClientID] plus other client details. Table 2 contains Episode of care details, primary key [EpisodeofcareID], [episodeofcareDate] etc... Table 3 contains all test results for assessment 1, primary key [CoreID], [CoreDate] plus numerous scores for individual tests. Table 4 contains all test results for assessment 2, primary key [HonosID], [HonosDate] plus numerous scores for individual tests.
Table 1 is linked to Table 2, and Table 2 is linked to both Table 3 & 4.
I have set up a search procedure whereby the user enters a clients name which then opens a list box of all clients with that name. When the client selects from the listbox I want a second listbox to open which has three visible columns. One giving the date of each episode of care for the client, the second giving the date of each assessment completed and the third giving the name of the assessment carried out.
I'm managing to get the date of the Episode of Care to display on the first visible column but I'm getting stuck on the next two. This would seem to involve somehow combining data from different tables into individual columns on the listbox. For example I need the second visible column on this listbox to list all the dates of assessments for the chosen client from tables 3 & 4. (e.g. [CoreDate] and [HonosDate]). Column three would then give the title of the assessment next to the date in column two. None of the tables have a field listing titles as this is determined by which table the data is entered into. I've been trying to solve this by queries without much success.
Could anyone give some ideas as to how I could solve these problems?
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
Dim i As Integer, c As String With Me.ListBox.Column(0) For i = 0 To Me.ListBox.ListCount - 1 c = c & Me.ListBox.ItemData(i) & ", " Next End With c = Left(c, Len(c) - 2)
This works great!! Now I am trying to concatenate the column 3 of the listbox.
Tried to use the code below (pointing to the second column) but it always returns the first column data.
'Dim i As Integer, d As String With Me.ListBox.Column(2) For i = 0 To Me.ListBox.ListCount - 1 d = d & Me.ListBox.ItemData(i) & ", " Next End With d = Left(d, Len(d) - 2)
ItemData does not allow pointing to my 3 column of the listbox.
So I have a list box that lists organizations. I recently changed the list box type to extended multi select. On the same form, I have a button that opens a new form where the user can input contacts for each organization. When the list box was not multi select, the expression [forms]![media]!
[List30] made the default value of one of the fields in my contact form the bound column from the selection in the list box. However, now that the list box is multi select, the contact input form does not seem to be able to get the value from the bound column in the list box. When multi select is turned on, is the bound column stored differently.
To even get the contact input button to work, I had to change the code from:
Private Sub Command40_Click() On Error GoTo Err_Command40_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "Contactsqry" stLinkCriteria = "[Organization ID]=" & Me.List30
How can I pass two (2) values to a saved query ? These values are in a form that has a listbox with two (2) columns. The name of the form is 'Previous Evaluation Form'. I'm able to retrieve the values from both columns of the listbox in the form and I've already created the query. Both are working fine, but can figure out how to pass the query's criteria to select records for 'Name' and 'Date' columns of the query. Below is what I had in the 'Criteria:' of the query. What wrong with the code that is placed in the query's 'Criteria:' ?
I have two list boxes on a form. The first listbox contains CATEGORIES and the second contains ITEMS that belong to respective categories. So, when i click a category the next listbox displays the items that belong to that particular category.
I need to know how to add new items to a selected category and also delete items from a selected category. If no category is selected or item already exixts, item should not add.
I have a listbox control on my form which works in conjunction with my search field on the first form. I can add new items with FRM_ItemsAdd. I can delete records by pressing the delete button.
However now I want the ability to Edit items in the list. How can I tell access I want to edit a record?
I have a form on which I use combo boxes to filter a listbox using the following code.
Private Sub FilterpartsList() Dim strRS As String ' Filter the list box appropriately based on the combo box selection(s) strRS = "SELECT partsquery.partname, partsquery.Heritage, partsquery.Description FROM partsquery" If Not IsNull(Me.cbomodelID) Then strRS = strRS & " WHERE modelID = " & Me.cbomodelID
I am looking to loop through all of the rows in a listbox. For each row in the listbox, I want to check if the last name in the Labor column is contained in any records in the Labor column of a recordset. If it is contained, add the column value to a variable to eventually be shown in another listbox. It seems that the loop is not working correctly and the EstHours is always 0 and the instr function doesn't seem to be working.
Code: Sub ScheduledHours() 'on error goto errorhandler Dim LastName As String Dim FullName As Variant Dim EstHours As Long