General :: Run Time Error 3011 When Exporting Access Report To Excel

Dec 18, 2012

I using excel 2010 and access 2010. I have VBA script runtime error 3011 when running script. It has problem finding access report. First I was passing in as variable with the name. Then I used a script to pull in the report name from access and it is still failing with same error.

Code is shown below.

Private Sub Command29_Click()
Dim reportname As String
Dim theFilePath As String, FilePath As String, tempStr As String
' reportname = Me.My_DBTableName

[Code] ....

View Replies


ADVERTISEMENT

Modules & VBA :: Exporting From Access To Excel Run Time Error 31532

Apr 21, 2015

I'm trying to export queries from access to excel using the DoCmd option. The code (see below) works to a point - it exports some of the queries before I get a run time error:

"31532: Microsoft Access was unable to export the data".

The worksheet tabs also do not pick up the query name but instead return what looks like a temporary ID (e.g. ~TMPCLP118431). Have tried different file locations and versions of excel but the same thing keeps happening.

Code:
Sub ExportAllQueries()
Dim qdf As QueryDef
Dim db As Database

[Code]....

View 3 Replies View Related

Exporting From Access To Excel And Receiving Error Message

Jun 27, 2013

I am trying to export from Access to Excel. I am relatively new to this process. I am receiving an error that I am not using a valid path. I have tried to recreate the former path without any luck.

What I had done was to delete some old information that was making the former Excel sheet too large and create a more up to date database. I had to reformat the spreadsheet and export the new information to excel but when I pull it in it will not pull into the shared network drive without giving me the error message.

View 6 Replies View Related

General :: Exporting From Access To Excel

Nov 19, 2013

Access version 2010
Excel version 2010

I added a command button to get one of my access reports to export to excel. The process works perfectly on my computer, but when my colleague runs the report on a different computer and tries to use the button, an error comes up that says "can't complete the output operation" (runtime error 2587).

I've tried to find a solution online, but most of those are geared toward having a full version vs. runtime, and that is not an issue here. Both my colleague and I have full versions, and we are both using Access 2010 and Excel 2010. I just tested on another colleague's computer and it works fine.

View 8 Replies View Related

Remove Unwrap Text After Exporting Report From Access To Excel?

Mar 14, 2012

How to remove unwrap text after exporting report from Access to Excel?

View 11 Replies View Related

General :: Exporting Access Data Into Existing Excel Doc

Dec 17, 2013

I have made a access database which captures new booking information and i then want to export this to a pre-existing excel doc which has formulas in which will work out how long it took my team to process it.

So my question really is to see if it possible to just keep adding data to an excel doc that i have created?

View 3 Replies View Related

Exporting Access 2003 Report To Excel Truncates Memmo Field

Jan 10, 2005

When I export a report to Excel, a memmo field is truncated to 256 characters. If I export the query behind the report, the memmo field is exported correctly. Is there a way to export an Access 2003 report to Excel and maintain all of the data and report formating in memmo fields?

View 1 Replies View Related

General :: Exporting Each Field Of Access Database To Excel With Different Format

Oct 5, 2012

I actually have an ms access database with the following format(assuming)

title1title2title3title4title5title6
1a1b1c1d1e1f
2b2b2c2d2e2f
3a3b3c3d3e3f
4a4b4c4d4e4f

for each row in the ms access database above i need to retrieve an excel in the format below

title11a
title21b
title31c
title41d
title51e
title61f

title12a
title22b
title32c
title42d
title52e
title62f

and so on....

Where I can proceed, what tool can I use??

View 2 Replies View Related

Reports :: MS Access 2010 Report - Exporting To Excel Produces Blank Xls File?

Jun 27, 2014

My report (rptBilling_STS_Summary) has three subreports (rptBilling_STS_Summary_Install, rptBilling_STS_Summary_Rental, rptBilling_STS_Summary_LDRate) that return values that are grouped by customer and calculates a total for each customer.

I need the report to export to excel for our client but every attempt has produced a blank XLS file. I have tried every export method I can think of. This is what I have tried:

Export button from external data ribbon
Export from print preview
Export via macro
Export via VBA (DoCmd.OutputTo acOutputReport, "rptBilling_STS_Summary", acFormatXLS, , False, , , acExportQualityPrint)

All this has produced the same blank excel file... Very frustrating...

I have searched and found a lot of information on 2007 and it requiring sp2 but all I can find on 2010 is instructional information.

Update: I copied the database to my local PC and when I export the XLS file it opens in protected view.

View 5 Replies View Related

General :: Cannot Publish Excel Pivot Chart - Run Time Error

Oct 11, 2013

I am trying to publish an Excel Pivot Chart, but keep getting Run Time Error 1004 - Application-defined or object-defined error...

I have tried the code 2 ways:

Code:
Sub PublishChart() Worksheets("Historical_Pivot").Activate
With ActiveWorkbook.PublishObjects.Add(xlSourceChart, _
Path & "" & "AWA" & "_" & "JAMALCO" & "_" & "Chart" & ".htm", _
"Historical_Pivot", "JAMALCO", xlHtmlStatic, "ABC REQ BACKLOG_2013", "")
.Publish (True)
.AutoRepublish = False
End With
End Sub

Code:
Sub PublishChart()
Dim wb As Workbook
Dim ws As Worksheet
Set wb = ThisWorkbookSet ws = wb.Sheets("Historical_Pivot")
ws.ChartObjects("JAMALCO").Activate
With wb.PublishObjects.Add(xlSourceChart, Path & "" & "AWA" & "_" & "JAMALCO" & "_" & "Chart" & ".htm", ws _
, "", xlHtmlStatic, "", "")
.Publish (True)
End With
End Sub

View 1 Replies View Related

Error 3011 Database Corrupt

Jul 24, 2007

Hi there,

when i am tryint to access my Access database its giving this error:

The Microsoft Jet database engine could not find the object MSysDB. Make sure the object exists and that you spell its name and the path name correctly. (Error 3011)

I am not even able to get in there

Please Advice
Danny

View 8 Replies View Related

Exporting Table In Excel Format And Email As Well At Certain Time Of Day

Sep 6, 2012

I want to export a table in access table .

1. for example every day at 8.00 it create an output excel file.
2. Attach the file and send to a fixed email at that time.

View 1 Replies View Related

Modules & VBA :: Exporting Data By ID To Excel - Choosing Special Time

Sep 12, 2013

I Export data by ID from Access to Excel.

Is it possible that two mgsbox will Show up, where the user can put in the timeperiod.

The time period would be the starting day of the contract.

It's called inception_date

Code:
Private Sub Befehl1_Click()
Dim xlApp As Object 'Excel.Application
Dim xlBook As Object 'Excel.Workbook
Dim xlSheet As Object 'Excel.Worksheet
Dim rstID As DAO.Recordset, tmpStr As String
Dim rstGr As DAO.Recordset, strSQL As String

[Code] ....

View 2 Replies View Related

Automation (query For Exporting To Excel) Error

Jan 5, 2006

Hi folks, I need your help.

Did any one get a error message like the one below:

Run-time error ‘3061’:
Too few parameters. Expected 1.

Basically I have a form with a command button and a combo box. The combo box's row source property is set to the following sql:

SELECT DISTINCTROW tblProjts1.intProjectID, tblProjts1.chrProjectName FROM tblProjts1 ORDER BY tblProjts1.chrProjectName;

I have a command button which runs the following procedure (Thanks, credit goes to madrav72):
Private Sub cmdSendToExcel_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Set db = CurrentDb

'Set rs = db.OpenRecordset("qryOne", dbOpenSnapshot)
Set rs = db.OpenRecordset("qryTwo", dbOpenSnapshot)

'Start a new workbook in Excel
Dim oApp As New Excel.Application
Dim oBook As Excel.Workbook
Dim oSheet As Excel.Worksheet

Set oBook = oApp.Workbooks.Add
Set oSheet = oBook.Worksheets(1)

'Add the field names in row 1
Dim i As Integer
Dim iNumCols As Integer
iNumCols = rs.Fields.Count
For i = 1 To iNumCols
oSheet.Cells(1, i).Value = rs.Fields(i - 1).Name
Next

'Add the data starting at cell A2
oSheet.Range("A2").CopyFromRecordset rs

'Format the header row as bold and autofit the columns
With oSheet.Range("a1").Resize(1, iNumCols)
.Font.Bold = True
.EntireColumn.AutoFit
End With

oApp.Visible = True
oApp.UserControl = True

'Close the Database and Recordset
rs.Close
db.Close

End Sub
qryOne:
SELECT tblProjts1.intProjectId, tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, tblMaxLoad.*
FROM tblProjts1 INNER JOIN tblMaxLoad ON tblProjts1.intProjectId = tblMaxLoad.intProjectId;

qryTwo:
SELECT tblProjts1.intProjectId, tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, tblMaxLoad.*
FROM tblProjts1 INNER JOIN tblMaxLoad ON tblProjts1.intProjectId=tblMaxLoad.intProjectId
WHERE (((tblMaxLoad.intProjectId)=Forms!frmReprtSelen!cb oProj));

My problem: When I run cmdSendToExcel_Click procedure with “ Set rs = db.OpenRecordset("qryOne", dbOpenSnapshot) “ it loads the excel and export the data to Excel without any problem. The Excel spreadsheet will show the rows as follows:
ProjtIdProjName Column3Column4 Column5, etc
8Bechtel xxxyyy
9WOPS aaabbb
11Spring zzzttt
12AgP mmmnnn

But when I run with Set rs = db.OpenRecordset("qryTwo", dbOpenSnapshot), I get the error
“Run-time error ‘3061’:
Too few parameters. Expected 1.”

I even tested the qryTwo using a separate command button with the following code on the click event:
stDocName = "qryTwo"
DoCmd.OpenQuery stDocName, acNormal, acEdit
and it produces the single row based on the projectId selected on combo box (as shonw below in datasheet view):
ProjtIdProjName Column3Column4 Column5, etc
8Bechtel xxxyyy

Does any one have any clue what this error 3061 is? Please help. I am struggling almost a week to figure this out, NO LUCK.

Thanks for your time and help in advance.

Shan.

View 1 Replies View Related

Exporting A Report To Excel

May 30, 2006

Hi there,

Once I have an Access report in the preview on the screen, I "export" it to Excel, using the built in Menu Symbol Option (analyse in Excel). It exports all the columns of the report perfectly, except for Dates. Here it doesn't just change the format - but shows ######## in the Excel column. When I click in the cell,it says "Negative Dates and Numbers are shown as ####". Any way I can stop this happening? I don't mind what format the date is in, in Excel, as long as it's readable!
Thanks a lot
Marion

View 3 Replies View Related

General :: Access Update SQL Run Time Error 3075

Aug 16, 2012

What's wrong with my zSQL string? I am working on it for 2 days and got no where. I want to put a IF statement

(=IF('Report - key'!$B$7="ALL","ALL",'2012 data'!B2))

to a ACCESS Text field using SQL Update. Here is my code:

Dim zSQL As String
Dim zmsg As String
Dim DQ As String

DQ = """"

zSQL = "UPDATE Supplier_Meeting_Planning SET [ID3] = ' " & "=IF(" & "'" & "Report - key" & "'" & "!$B$7=" & DQ & "ALL" & DQ & "," & DQ & "ALL" & DQ & "," & "'" & "2012 data" & "'" & "!B2)"
Debug.Print zSQL
DoCmd.RunSQL zSQL

It is very painful to put ' and " in the string.

View 7 Replies View Related

Exporting A Query(report) To Excel

Mar 11, 2008

I am exporting queries to Excel using a Form with command buttons. The code for this effort follows:

Private Sub Command8_Click()

Dim reportName As String
Dim theFilePath As String


Select Case Me.Frame1.Value

Case 1
reportName = "qryPriorMnth"
Case 2
reportName = "qryNewRequests"
Case 3
reportName = "qryNoApprovals"

End Select

theFilePath = Me.txtFilePath.Value
theFilePath = theFilePath & reportName & "_" & Format(Date, "yyyy-mm-dd") & ".xls"

DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel9, reportName, theFilePath, True

MsgBox "Done."

End Sub

The code works great, however, I will be making this available to several users who will use access from differenct PCs. In order for them to get the data passed to their respective desktops, they would have to change the Me.txtfilePath.Value in the properties manaually. This is currently in the Row.Source for an unbound text box. I would prefer them not messing with that. The current value is
="C:Documents and Settings’User_ID’Desktop"
where the User_ID (varies from user to user) would need to be changed. Can this be done with a variable setting that would prompt the user for their User_ID and then execute to the appropriate desk top. I am a VBA novice and would appreciate any help at all.

Thanks
Alan

View 2 Replies View Related

General :: Application Always Quit In Access Runtime On Every Run-time Error

Mar 24, 2014

I have setup a small application with front/back end in local network. On client machines i have installed access runtime. Although it works fine but it suddenly quit when there is any run time error while working on client machine. Although on server machine ( where full version is running it didn't close the application ).

What i need is an option to not quit the application completely. As i am not expert in coding of try/catch statements I need a simple solution for time being .

View 5 Replies View Related

General :: Downloading Excel Data From Site And Connect It To Access - Time Format Changed

Dec 18, 2013

I 'm downloading the excel data from the site and connecting it to access.

In excel the particular column (Time Taken) is in the format of "00:12:26".

After connecting it to access and appending it to the table, the format changed to "12:12:26", the first two digits changed to "12" and the remaining are as it is how it looks like in the excel. I need to change it to format what it looks like in the excel.

View 7 Replies View Related

General :: Exporting To Excel

May 8, 2015

I am trying to export the results of a query to Excel, which happens successfully, but when I try to save the Export steps I get Property not found.

View 4 Replies View Related

Exporting A Report To Excel Using Command Button And VBA

Nov 28, 2012

What would the VBA command line look like to export a report to Excel using a command button ?

View 3 Replies View Related

General :: Date Import From Excel To Access - Type Mismatch Error

Sep 17, 2014

So I have a macro in excel which imports data from the excel sheet to a table in access db. Now the excel file has 4 columns which have dates.

- I imported the excel file from access via access so that I can get the heading of the table and the table is created. Then I deleted all the data in the table.
- When the table was imported 2 of the date columns got set as Short/text data type. Dont know why.
- Now, if I leave the data type as it is in Access table, my macro button in EXCEL works fine and imports the data to Access. If I change the data type, in access design, of the two data columns to date type, I get the type mismatch error when I run the import macro button in EXCEL.

I am going nuts over this error. I even created a blank table in access and defined data types to all columns which would be imported from excel. but still excel macro button shows the same error.

I checked the format of all the four date columns is date.

I did a lot of hit and try and could it be the case that if access table fields are defined properly, but any of the data columns cells in excel sheet is null/empty, it will show the type mismatch error.

ALTERNATIVELY, is it possible and is there a way, that once the data is imported to access, I can convert the value in the column from short text to date type.

View 1 Replies View Related

General :: Exporting To Excel Changes Field Value

Sep 4, 2012

I'm relatively new to Access. I've created a database where we track product information and testing done on the products. I have the Product Code set up as a combo box with five other fields auto populating based on what is entered into the Product Code field. However, when I export the table or form to Excel, the Product Code changes to another number, which I think is an auto number but does not directly relate to the product entered (either one up or down from the product).

View 2 Replies View Related

General :: Exporting Excel File From Query

Dec 17, 2013

Am trying to export an excel (97-03) file from a query I have. Some of the columns have exported as number values (as its linked via unique id's). I want it to export certain columns as the text columns. I have tried the lookup route but it doesn't seem to make a difference.

View 4 Replies View Related

Customize Date Report When Exporting Data To Excel Format

Aug 18, 2015

I have a form that shows the data.All the date format display this kind of format " 12/17/1974".But when I export it to excel format.The date is displayed as "17-Dec-74".However, when i double click on the cell ,it will show "12/17/1974"...I want the date to displayed in excel -> "17-Dec-1974" or "dd-mmm-yyyy" how can i change the date format when manually formatting the date in excel .

View 1 Replies View Related

General :: Exporting A Single Record To PDF And Excel File

Feb 27, 2013

I am trying to Export a single record from my customer table and using below codes -

Private Sub lblPDF_Click()
Me.Refresh
Dim myPath As String
Dim stDocName As String
Dim theFileName As String
stDocName = "rptCustomerMaster" (is my Report File name)
>>>DoCmd.OpenReport stDocName, acPreview, , "CustId = " & Nz(Me.CustID, 0)
myPath = "C:..."
theFileName = "CustID " & CustID & ".pdf"
DoCmd.OutputTo acOutputReport, stDocName, acFormatPDF, theFileName, True
End Sub

Having errors on the highlighted code, how to resolve it, or is there any support available to export record into PDF file?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved