I know how to use a callback to to action a button click directly.
But I also have a drop down list of my buttons on a form (they are dynamically created, so the details are stored in a table), I want to select a button from my drop down lists and then action the button selected.
EDIT: In short - I want to execute a ribbon button via vba knowing its Control.ID.
enable me to run some code before a button is clicked I want to be able to click a button via VBA code.Basically I used the auto button wizard to make an add record button.To ensure a shed loads of if checks and queries on the entered form data run I wanted to make this button invisible, then make a new button running code not embedded macros to run my checking module then click.
View 9 Replies View RelatedI'd like to create 'Exit Microsoft Access' Button.
In Command Button Wizard which action I should use to get it right? and finally in the properties should go to 'on click'?
i want to ask is there any way to open another access database using when click button at form.. for example i have tracking.accb then at my switchboard form, i would like to have a button that can go to another access which is borrow.accb. can these possible for me to do it..?
View 3 Replies View RelatedI am sending an email using SendObject. Sometimes it works, and sometimes it makes the computer freeze up with no error message. I have tried this with Outlook running or not running, seems to make no difference.
Code:
'The sub procedure below sends e-mail in response to a click on the Send button.
Private Sub SendMessagesButton_Click()
'For Access, define some object variables and make connections.
Dim myConnection As ADODB.Connection
Set myConnection = CurrentProject.Connection
Dim myRecordSet As New ADODB.Recordset
myRecordSet.ActiveConnection = myConnection
[Code] ....
I have added some MsgBox () to narrow down where it crashes. It is after 'Five' and Before 'Six'. On the line:
Set appOutlookRecip = .Recipients.Add(eMailAddress)
I am mystified as to why it works OK sometimes, and not others. The email address being used is valid.
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
Any way to move the navigation bar up to the ribbon?
I have been able to add the - First, Last, Next, Previous record buttons but I am stuck at the search box...
Is there a way to run a query, macro, and/or report in the "background". By this I mean in a way that frees up the current operator to do other things in the database while the query, macro, report keep on running?
View 1 Replies View RelatedWhen I have the Home and Create default ribbons showing... then when I choose to Preview a report the Print Preview Ribbon is displayed and the Home and Create Ribbons are hidden or not visible.I have created a CustomRibbon and this CustomRibbon is not hidden when I choose to preview a report. The Print Preview ribbon is shown but the CustomRibbon keeps the focus and is not hidden.I would like for the CustomRibbon to not be visible.
View 2 Replies View RelatedI want to create an addin that adds a tab to the ribbon. I already have an add in installed that works exactly the way I want mine to, but I can't find the .mda file anywhere. I want to stick with the .mda so I have access to my forms. Here are some images of that add in I mention.
View 2 Replies View RelatedI am upgrading an Access 2000 system to 2007 and replacing user toolbars with Ribbons.I have a strange parsing error that I think is not my error.
I have placed the following control into a group:
<control idMso="GroupPrintPreviewClosePreview" label="Close Preview" enabled="true"/> and "the system" rejects it with Error Code 0x80004005 Element <group> is not expected in <group>I
t turns out that it is finding the word Group within the double quotes and interpretting is at part of the XML syntax.
Change to another idMSO and the problem goes away. Same happened with another control that had the word Group in the id.
I have the following xml script in my table and I want to make the 3rd button be a image that is saved in my c drive.
Code:
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui" onLoad="onRibbonLoad1">
<ribbon startFromScratch="true" >
<tabs>
[code]....
I found the following getimage script but am not sure how to apply it to my button, I have seem various examples on sites but just can't get it to work.
Can I somehow set the icon path like C:Image1.png
Code:
Public Sub getImages(control As IRibbonControl, _
ByRef image)
Set Image = LoadPicture(getAppPath & control.Tag)
' Maybe something like
' Set Image = LoadPicture(c:image1.png)
End Sub
I've created a custom ribbon for my end users (Access 2010) and everything looks and works great except for one issue that is becoming a deal breaker for me and my end users:
I've got a number of tabs on my custom ribbon and on each tab there are a number of buttons that open various forms and reports. Anytime one of those forms or reports is opened and then closed, the ribbon jumps back to the first tab in my custom ribbon. So if you were on tab 3, opened a form and then closed it, you would be jumped back to tab 1.
Any workaround for what seems to be "by design" behavior for custom ribbons? The built-in ribbon does not do this.....
In Access 2010 I made a custom ribbon.The File Tab still gives users access to features that should not be available to them such as: Compact & Repair, Encrypt etc.I spent a few hours looking for a solution but found none that works.It does not seem to be possible to hide the File Tab, but is there a way to hide the options it reveals?
View 3 Replies View RelatedThe user wants all the non-basic functionality of the ribbon hiden. To accomplish that by doing the usual stuff:
File >> Options >> Current Database >> Allow Full Menus (unchecked)
Everything worked as expected, but we came across an issue. The user needs to open a report in "print preview" and they need to be able to export their report to excel. The "print preview" ribbon tab is there, but it is not showing the "Data" area, where all the export options are.
How can I do this without a costume ribbon?
Maybe there is a way of manipulating which areas of the ribbon/tabs/areas/controls are enabled from VBA?
I have report that i have in preview. In that report i have ribbon that has buttons close and print. Close works fine, with print it goes ok but when "printer selection" comes, i try to change printer it informs that not enough memory. All this code that is in ribbon buttons is in VBA.
What could be the reason for memory stuff or how could this be made that this inform wouldn't come.
Code below:
Sub EnnakkoMyButtonCallbackOnAction(control As IRibbonControl)
Select Case control.ID
Case "MyBtn1"
DoCmd.OpenReport "Tuotanto Ennakko", acViewPreview
[Code] ....
I am able to bypass the shift key so I can disable ribbon and all menus at startup.
But the issue I have is anytime someone makes a copy of the database or it is their first time opening it they get prompted with the security warning:
"Security Warning - some active content has been disabled, click here to enable"
and it gives them complete access to see the back end of the database because while that warning message is popped up ... before they click "enable" they can go do anything in the database including see tables, data, and vba.
Once they click "enable content" that first time the bypass takes effect and the ribbon and all menus disappear, but if they dont click it they can navigate all around the db
how can i stop that?
i have built an application , all i have is one main form and every action take place inside it. Before making it as .accde file for code protection, i want to hide table pane, navigation ribbon, the Main form Tab. i.e only Main form should open like a applicaiton and not inside access as a tab.
View 1 Replies View RelatedI have created an application. It has a split front end and back end. I plan to distribute the runtime version. I have used code throughout that "hides" the microsoft access shell for popup (modal) windows. In every form & report I have a function to show or hide the access window. Everything works great until I get to my reports. I open reports in print preview. I created a custom table (USysRibbons) and added a Reports print preview ribbon & xml. I assigned that ribbon to my report(s), and I assigned it in options as the default ribbon. If I test the ribbon (by working in the database using "shift" open) I see my ribbon. But, in when I open app without shift or or if I emulate runtime, I can't get the ribbon.
I have multiple popups forms, several non popup forms and a couple of reports.I just want to keep all the access background stuff hidden - except for needing the ability to print.
Ok if I sound like I do not know what I am talking about, that would be correct. That is why I am asking here.
So I have this form called frm_UserMaintenance
On The form I have a button
I would like to have an OnClick event that will activate one of the dialogue boxes on the tools menu.
Heres the catch. The menu is not visible and i do not want to make it visible. This makes using sendkeys a non option.
Any ideas????
I have a form with 3 textboxes. Data in any one of them will be used in a query which is run currently through a command button.
I want to run the query after the user hits Enter in the textbox after their data.
I could use the 'after_Update' event but this activates when focus is lost from the text box, or on Tabs etc - not the intended function.
Any way to simulate this? (trap the chr of the Key?)
tx
I have a form on which I have a button that I want the user to click after a cetrain field on that form is updated.
I display a little pop-up box saying to make sure that a user clicks on that button.
Is there a way to know that this button was clicked? Is there a way to not proceed with anything else until that button is actually clicked?
Thanks.
Hi,
I have a form with a number of drop-down lists on it and each of these lists is bound to a field in a table.
When I return the results of a search to this form I want to allow users to be able to cycle through the records and change them if they want. However, the changes should only be saved if the user clicks on the "update record button". This button is simply the save record button by the MS Access wizard.
At the moment if they change the value in one of the drop down lists and move onto the next record the change is saved even though the user doesn't click any button. I want to prevent this from happening.
Any ideas on how I might achieve this?
If I prevent "AllowEdits" in the form properties I can't update the form using the "update record button" either.
Many Thanks,
Afternoon people,
Just a query (no pun intended). Is there a way to ping an ip address which is taken from a table and at the click of a button it pings? Bringing up the cmd app to show the results.
Cheers,
Storm1976
I currently have a form with a button that once clicked displays a word document,however I have to double click on the button even though the code is on the single click event property.The only line of code is as follows
OLEFile.Action = acOLEActivate
Does any body know how I can get the single click to work ?
Hi all....
I have a list box that I can select mulitple items from - I then click a search button and it runs a query that finds what I am looking for from a table and then displays the results in a subform.
In the subform I can input weights and get a percent....anyhow.
How do I set up a button so that it will print out a report or the report from the subform information that is currently being viewed.
Also, I can already do this by clicking a button on the form and pulling up the installed report program but, you need to input data to get this report.
I kinda want this button to be a "I need it now" type of print option.
Thanks...as always my questions are probably confusing...:D